Lace up your style with a classic pair of Vans! Whether you’re hitting the skatepark or cruising the streets, the iconic checkered pattern and sturdy construction make these shoes a timeless favorite. But lacing them up can be a bit tricky if you’ve never done it before. Don’t worry, we’ve got you covered with this comprehensive guide on how to lace your Vans like a pro.
Start by threading the laces through the holes at the bottom of the shoe. Cross the laces over each other and bring them up through the next set of holes. Continue this pattern until you reach the top of the shoe. For a secure fit, pull the laces tight as you go. Now it’s time to create the classic “crisscross” lacing pattern that’s synonymous with Vans. Take the left lace and cross it over the right lace. Then, bring the right lace up through the next hole and cross it over the left lace.
Repeat this crisscross pattern until you reach the top of the shoe. To finish, tie the laces together in a double knot. And there you have it! Your Vans are now perfectly laced and ready for action. Remember, practice makes perfect, so don’t get discouraged if it takes you a few tries to get it right. With a little patience, you’ll soon be lacing up your Vans like a seasoned pro.
Secure the Laces
Before you start lacing your Vans, make sure your laces are long enough. You’ll need about 45 inches of lace for each lace. If your laces are too short, they won’t be able to reach the top of the shoe.
Once you have the right length of laces, follow these steps to secure them:
1. Start by threading the laces through the bottom two eyelets on one side of the shoe.
2. Cross the laces over each other and pull them up snugly.
3. Thread the laces through the next two eyelets on the other side of the shoe.
4. Cross the laces over each other again and pull them up tight.
5. Continue to lace the shoes up in this manner, alternating sides and crossing the laces over each other as you go.
6. When you get to the top two eyelets, thread the laces through the eyelets and then double-knot the laces to secure them.
7. Trim any excess lace.
Tips for Lacing Your Vans
* Use the criss-cross method to create a secure lace that will keep your shoes on your feet.
* You can adjust the tightness of the laces to get a comfortable fit.
* If your laces are too loose, they may come untied.
* If your laces are too tight, they may cut off circulation to your feet.
* You can use different types of laces to create a custom look for your Vans.
* You can also use lace locks to keep your laces in place.
|
Criss-Cross Method
|
|
Loop Method
|
|
Straight Lace Method
|
|-|-|-|
|
Create a strong and secure hold that keeps your shoes firmly on your feet.
|
|
Provides a snug fit that conforms to the contours of your feet.
|
|
An effortless and simple technique, ideal for a quick and easy lacing job.
|
Lace the Top Eyelet
1. Start by inserting one lace from the inside of the boot through the top eyelet on the opposite side. Push the lace all the way through until the tip reaches the outside.
2. Bring the lace straight down and insert it into the bottom eyelet on the same side. Again, make sure to thread the lace all the way through until the tip is visible on the outside of the boot.
3. Bring the lace up and insert it into the second eyelet on the opposite side. Make sure to thread the lace all the way through until the tip is visible on the outside of the boot.
4. Repeat steps 1-3 for the other lace on the other side of the boot.
5. Tie the laces together in a bow, making sure the knot is secure.
6. Trim any excess lace if desired.
Cross the Laces
Now that you have your laces through the first two holes at the bottom of the shoe (one lace through each), it’s time to cross them over each other. Take the left lace and bring it up and over the right lace, creating an “X” shape. Then, take the right lace and bring it up and over the left lace, crossing it over the left lace to create a second “X” shape.
Creating a Diamond Pattern
To create a diamond pattern with your laces, continue crossing the laces over each other in an alternating pattern. Take the left lace and cross it over the right lace, then take the right lace and cross it over the left lace. Repeat this pattern until you reach the top of the shoe. The result will be a series of diamond-shaped loops.
Creating a Checkerboard Pattern
To create a checkerboard pattern with your laces, you’ll need to alternate the direction of the lace crossings. For example, you could start by crossing the left lace over the right lace, then crossing the right lace under the left lace. Continue alternating the direction of the lace crossings until you reach the top of the shoe. The result will be a series of checkerboard-shaped loops.
| Lacing Pattern | Steps |
|---|---|
| Diamond Pattern | Cross the laces over each other in an alternating pattern, creating “X” shapes. |
| Checkerboard Pattern | Alternate the direction of the lace crossings, creating checkerboard-shaped loops. |
Lace the Bottom Eyelets
Begin by threading the lace through the bottom eyelets of the left and right shoes. Cross the laces over each other and pull them up slightly to create a snug fit. Ensure that the laces are even on both sides and not too tight.
Step-by-Step Guide:
| Step | Description |
|---|---|
| 1 | Thread the lace through the bottom outer eyelet of the left shoe. |
| 2 | Cross the lace over to the bottom inner eyelet of the right shoe and thread it through. |
| 3 | Pull both laces up evenly to create a snug fit. |
| 4 | Repeat the process for the bottom outer eyelet of the right shoe and the bottom inner eyelet of the left shoe. |
Once the bottom eyelets are laced, you can move on to lacing the middle and top eyelets for a secure and stylish fit.
Tighten and Secure the Knot
Once you’ve threaded the laces through all of the eyelets, it’s time to tighten and secure the knot. Here’s a detailed step-by-step guide:
- Create a double overhand knot: Cross the left lace over the right lace, then bring the left lace back under the right lace and through the loop you’ve just created on the right side. Repeat this step to create a second loop, forming a double overhand knot.
- Pull the knot tightly: Gently pull both ends of the laces to tighten the knot and secure the laces. Ensure the knot is situated snugly against the top eyelet pair.
- Tuck the excess laces: If there is any excess lace, tuck it into the sides of the shoe or under the tongue to avoid tripping hazards or creating discomfort while walking.
- Test the fit: Walk around a bit to ensure the shoes are comfortably snug and provide adequate support. If they feel too loose or too tight, adjust the knot accordingly.
-
Additional tips:
- For a more secure knot, double or triple the overhand knot by repeating the knotting process multiple times.
- Avoid pulling the laces too tightly, as this can cut off circulation or cause discomfort.
| Knot Type | Description |
|---|---|
| Double Overhand Knot | Standard, sturdy knot for most situations |
| Triple Overhand Knot | Enhanced security for loose-fitting shoes |
| Surgeon’s Knot | Secure knot with a snug fit |
Alternate Lacing
Criss-Cross Lace
A classic and versatile lacing pattern, the criss-cross lace provides a secure fit and a traditional look. To begin, thread the laces through the bottom two eyelets on one side, leaving a short tail on one end. Bring the laces up through the second and third eyelets on the other side, then cross them over and bring them back down through the second and third eyelets on the first side. Continue lacing in this manner all the way up to the top, ensuring to tighten the laces as you go.
Ladder Lace
For a unique and eye-catching look, try the ladder lace. Thread the laces through the bottom two eyelets on one side, then cross them over and thread them through the second and third eyelets on the other side. Now, instead of crossing them again, simply thread them straight up through the fourth eyelets on both sides. Repeat this skipping pattern all the way up, creating a ladder-like effect with the laces.
Railroad Lace
Known for its durability and a secure fit, the railroad lace is a popular choice for skaters and those who want a snug fit. Start by threading the laces through the bottom two eyelets on one side, then bring them up through the first and second eyelets on the other side. Now, instead of crossing them, bring them up through the third and fourth eyelets on the first side. Repeat this over-under pattern all the way up, ensuring to tighten the laces as you go.
Checkerboard Lace
To create a playful and visually striking effect, try the checkerboard lace. Begin by threading the laces through the bottom two eyelets on one side, leaving a short tail on one end. Now, instead of crossing them, bring the laces up through the third and fourth eyelets on the same side. Repeat this on the other side, alternating the side you bring the laces up on each time you create a row. The result will be a checkerboard pattern on the top of the shoes.
Bow Lace
For a feminine and charming touch, consider the bow lace. Thread the laces through the bottom two eyelets, then bring them up through the second and third eyelets on the other side. Now, instead of crossing them, make a small loop with one lace and bring it through the fourth eyelet on the same side. Repeat with the other lace, creating a symmetrical bow shape on the top of the shoe.
Spiral Lace
Add an element of whimsy and uniqueness with the spiral lace. Thread the laces through the bottom two eyelets and cross them over. Now, instead of bringing them up through the next eyelets, bring them up and over the third eyelets, crossing them again. Continue this diagonal lacing pattern all the way up, creating a spiral effect with the laces.
Loop Lacing
Loop lacing is the most basic and common lacing method. It’s simple, secure, and looks great on any type of Vans shoe. Plus, it’s the perfect starting point if you want to try more advanced lacing techniques down the road.
- Start by threading your laces through the bottom two eyelets on each side of the shoe.
- Cross the laces over each other and thread them through the next two eyelets up.
- Continue this pattern until you reach the top of the shoe.
- On the last row, thread the laces through the top two eyelets and tie them in a bow.
Here are some tips for getting the perfect loop lace:
| Tip | Explanation |
|---|---|
| Use even tension | Make sure the laces are pulled tight enough to secure the shoe, but not so tight that they cut off circulation. |
| Cross the laces over each other | This creates a more secure hold than simply threading the laces through the eyelets in a straight line. |
| Go up one row at a time | This helps to keep the laces from getting tangled. |
Overhand Lacing
Overhand lacing is the most common and straightforward method of lacing shoes. It’s simple to learn and provides a secure and comfortable fit.
1. Cross the Ends
Start by crossing the two ends of the laces over each other, forming an X.
2. Bring the Right End Under
Bring the right end of the lace under the left end, creating a loop.
3. Pull the Left End Through
Pull the left end of the lace through the loop on the right side.
4. Tighten the Knot
Pull both ends of the laces to tighten the knot.
5. Lace the First Eyelet Pair
Thread the left lace through the first eyelet on the left shoe and the right lace through the first eyelet on the right shoe.
6. Cross the Laces
Cross the laces over each other and thread the left lace through the second eyelet on the right shoe and the right lace through the second eyelet on the left shoe.
7. Repeat the Process
Continue crossing and threading the laces through the remaining eyelets, alternating between the left and right shoes.
8. Create a Bunny Ear Loop
For the last eyelet pair, cross the laces over each other, create a loop with each end of the lace, and pull the loops through the last eyelets (see table below).
| Left Shoe | Right Shoe |
|---|---|
|
Cross laces over. |
Cross laces over. |
|
Form loop with right lace end. |
Form loop with left lace end. |
|
Pull loop through left eyelet. |
Pull loop through right eyelet. |
|
Form loop with left lace end. |
Form loop with right lace end. |
|
Pull loop through left eyelet. |
Pull loop through right eyelet. |
9. Tighten and Tie
Pull both ends of the laces to tighten the knot. Leave enough lace to tie a bow or double knot.
Slip-On Method
The slip-on method is a popular and straightforward technique for lacing your Vans without tying them. Here’s a step-by-step guide:
Step 1: Start with the first eyelet. Insert the lace from the outside of the shoe into the first eyelet on the inside.
Step 2: Cross the laces. Cross the left lace over the right lace and pass it into the second eyelet on the outside.
Step 3: Repeat. Cross the right lace over the left lace and pass it into the third eyelet on the inside.
Step 4: Loop under. Bring the left lace under the right lace and pass it into the fourth eyelet on the outside.
Step 5: Loop over. Bring the right lace over the left lace and pass it into the fifth eyelet on the inside.
Step 6: Repeat. Continue alternating loop under and loop over until you reach the last eyelet.
Step 7: Tie at the top. When you reach the last eyelet, tie the laces together in a standard knot.
Step 8: Loop through the tongues. Take both laces and loop them through the lace loops on the tongues of the shoes.
Step 9: Lace up the tongues. Lace up the tongues as you would the rest of the shoes, alternating loop under and loop over. This will prevent the tongues from slipping out of place when you walk or run.
| Steps | Description |
|---|---|
| 1 | Insert lace from outside to inside eyelet. |
| 2 | Cross left lace over right and into second eyelet. |
| 3 | Cross right lace over left and into third eyelet. |
| 4 | Loop left lace under right and into fourth eyelet. |
| 5 | Loop right lace over left and into fifth eyelet. |
| 6 | Repeat alternating loop under and loop over. |
| 7 | Tie laces together at last eyelet. |
| 8 | Loop laces through tongue loops. |
| 9 | Lace up tongues alternating loop under and loop over. |
Finishing Touches
Now that your laces are secure, it’s time to add the finishing touches to your Vans.
10. Adjusting the Fit
Once your shoes are laced up, take a few steps to ensure they fit comfortably. If they feel too tight, loosen the laces slightly. If they feel too loose, tighten them up. You can also adjust the tension of the laces by pulling on them at different angles.
11. Tying the Laces
There are many different ways to tie your laces, so choose the one that’s most comfortable and secure for you. Some popular options include the square knot, the surgeon’s knot, and the double knot.
12. Hiding the Lace Ends
For a clean and polished look, tuck the lace ends inside the shoe. You can do this by passing the ends through the loops on the tongue or by using a lace lock.
13. Adding Accessories
If you want to add a personal touch to your Vans, consider adding some accessories. Lace locks, charms, and tassels are all great ways to customize your shoes.
14. Breaking Them In
New shoes can be stiff and uncomfortable at first, so it’s important to break them in. Wear your Vans for short periods at a time and gradually increase the amount of time you wear them as they become more comfortable.
15. Cleaning Your Vans
To keep your Vans looking their best, it’s important to clean them regularly. Use a soft brush or cloth to remove dirt and debris, and hand wash them with cold water and mild detergent if needed.
How To Lace Your New School Vans
Congratulations on your new pair of Vans! As you probably know, Vans are a classic shoe that can be worn with just about anything. But if you want to make your Vans look their best, you need to make sure they’re laced properly.
There are a few different ways to lace Vans, but the most popular method is the criss-cross lace. Here’s how to do it:
- Start by threading the laces through the bottom two eyelets on one side of the shoe.
- Bring the laces up and cross them over each other at the next eyelet up.
- Thread the laces through the opposite eyelet on the other side of the shoe.
- Bring the laces back across and thread them through the next eyelet up on the first side.
- Continue crossing the laces and threading them through the eyelets until you reach the top of the shoe.
- Tie the laces in a bow at the top of the shoe.
Once you’ve laced your Vans properly, you can adjust the tightness of the laces to your liking. If you want a snug fit, pull the laces tight. If you want a more relaxed fit, loosen the laces a bit.
People Also Ask About How To Lace Your New School Vans
How do I lace Vans with different colors?
To lace Vans with different colors, simply use two sets of laces in different colors. You can lace the shoes in any pattern you like, but a popular method is to use one color for the left shoe and one color for the right shoe.
How do I lace Vans with no-tie laces?
To lace Vans with no-tie laces, you will need to purchase a set of no-tie laces. These laces are typically made of elastic or a similar material, and they come with a toggle or other device that allows you to tighten and loosen the laces without tying them.
