Once you get your hands on the Armitron Pro Sport 40/8417 ZM1212 digital watch, you’ll want to set it to the correct time and date. The watch has a user-friendly interface and easy-to-use buttons, making the setup process a breeze. However, if you have never set a digital watch before, you might need some guidance. This step-by-step guide will walk you through the process of setting your Armitron Pro Sport watch effortlessly and accurately.
To begin, press the Mode button repeatedly until you reach the Set Time mode. You will know you are in the correct mode because the time digits on the display will start flashing. Use the + and – buttons to adjust the hours and minutes. Once the time is set, press the Mode button again to move to the Set Date mode. In this mode, the date digits will flash. Use the + and – buttons to adjust the month, day, and year. Finally, press the Mode button one last time to exit the Set mode and save your changes.
After setting the time and date, you can also adjust other settings on your Armitron Pro Sport watch. These settings include the alarm, stopwatch, timer, and backlight. To access these settings, press the Mode button until you reach the desired mode. Use the + and – buttons to adjust the settings and press the Mode button to save your changes. Once you have set all the desired settings, your Armitron Pro Sport watch will be ready to use.
Navigating the Control Buttons
The Armitron Pro Sport 40/8417 Zm1212 features four control buttons that provide access to a range of functions and settings. Let’s delve into each button’s functionality to help you master your watch’s capabilities:
Button 1 (Mode):
- Single press: Cycles through the watch’s modes, including Time, Alarm, Stopwatch, Countdown Timer, Dual Time, and more.
- Long press (3 seconds): Enters the desired mode’s settings menu.
- In settings menu: Navigates through available options and adjusts settings.
- Hold down (5 seconds): Resets the watch to its factory default settings.
- Press while in Time mode: Displays the current date and month.
- Press while in Alarm mode: Toggles the alarm on or off.
- Press while in Stopwatch mode: Starts, stops, or resets the stopwatch.
- Press while in Countdown Timer mode: Starts, stops, or resets the countdown timer.
- Press while in Dual Time mode: Switches between the two time zones.
| Button 1 (Mode) | Functionality |
|---|---|
| Single press | Cycles through modes |
| Long press (3 seconds) | Enters settings menu |
| In settings menu | Navigates options and adjusts settings |
| Hold down (5 seconds) | Resets watch to factory default settings |
| Press in Time mode | Displays date and month |
| Press in Alarm mode | Toggles alarm on or off |
| Press in Stopwatch mode | Starts, stops, or resets stopwatch |
| Press in Countdown Timer mode | Starts, stops, or resets countdown timer |
| Press in Dual Time mode | Switches between time zones |
Setting the Time and Date
1. Entering the Time Setting Mode
To enter the time setting mode, press and hold the “Mode” button for 3 seconds until the time display starts flashing.
2. Adjusting the Time and Date
Once in the time setting mode, use the “Start/Stop” and “Set” buttons to adjust the following settings in the order they appear:
| Button | Function |
|---|---|
| Start/Stop | Scroll through hours, minutes, seconds, and AM/PM |
| Set | Increment or decrement the selected setting |
Once you have adjusted the time settings, press the “Mode” button again to confirm and exit the time setting mode.
3. Setting the Date
To set the date, follow the same steps as for setting the time. However, the sequence of settings will be: year (two digits), month, and day.
Using the Chronograph Feature
The Armitron Pro Sport 40/8417 Zm1212 features a versatile chronograph that allows you to measure elapsed time with precision.
To access the chronograph, press the **bottom right button** to start, stop, and reset the timer.
Here’s a detailed breakdown of the chronograph operation:
| Button | Function |
|---|---|
| Bottom Right |
|
| Top Right |
|
Configuring the Alarm System
The Armitron Pro Sport 40/8417 ZM1212 watch features an alarm system that can be customized to your specific wake-up needs. Follow these steps to set the alarm:
1. Enter Alarm Setting Mode: Press and hold the “ALARM” button for three seconds until the “ALARM” icon and the alarm time flash on the screen.
2. Set the Alarm Time: Use the “MODE” button to toggle between the hour and minute settings. Press the “SET” button to adjust the values. Press “MODE” again to confirm the alarm time.
3. Enable or Disable the Alarm: Press the “ALARM” button once to enable the alarm. The alarm icon will appear on the screen. Press the “ALARM” button again to disable the alarm.
4. Configure Snooze Settings:
Advanced Snooze Options
The Armitron Pro Sport 40/8417 ZM1212 offers advanced snooze functionality:
- Snooze Duration: Set the length of the snooze interval, typically between 5 and 30 minutes.
- Snooze Count: Determine the number of times the alarm can be snoozed before it automatically turns off.
- Snooze Interval: Customize the time period between snooze intervals, allowing for a gradually increasing wake-up process.
These options can be accessed by repeatedly pressing the “MODE” button when in Alarm Setting Mode. Adjust the values using the “SET” button and confirm your selections by pressing “MODE” again.
| Snooze Option | Range |
|---|---|
| Snooze Duration | 5-30 minutes |
| Snooze Count | 1-9 times |
| Snooze Interval | 5-60 minutes |
Adjusting the Time Zone
The Armitron Pro Sport 40/8417 Zm1212 watch offers the ability to adjust the time zone, allowing you to stay on track when traveling or in different time zones. Here’s a step-by-step guide on how to do it:
1. Enter Time Adjustment Mode
Press and hold the “Mode” button for about 3 seconds until the time starts flashing.
2. Select the Time Zone Adjustment
Use the “Start/Stop” and “Light/Lap” buttons to navigate through the settings until you reach the “TZ” option.
3. Choose the Time Zone
Use the “Start/Stop” and “Light/Lap” buttons to scroll through the list of available time zones.
4. Set the Time Zone Offset
Once you have selected the desired time zone, use the “Split/Reset” button to adjust the time zone offset. The offset will be displayed in hours and minutes.
5. Understanding Time Zone Offset
The time zone offset refers to the difference in time between the current time zone and Universal Coordinated Time (UTC). To calculate the offset, subtract the local time from UTC. For example, if the local time is 8:00 AM and UTC is 12:00 PM, the time zone offset would be -4:00 (12:00 – 8:00 = -4:00).
| Example: | If you are traveling from New York City (UTC-5) to London (UTC+1), the time zone offset would be +6 hours (1 – (-5) = 6). |
6. Save the Settings
Once you have adjusted the time zone and offset, press the “Mode” button to save the settings and exit the time adjustment mode.
Calibrating the Compass
The compass on the Armitron Pro Sport 40/8417 Zm1212 is a valuable tool for navigation. However, it is important to calibrate the compass regularly to ensure accuracy. Here are the steps on how to calibrate the compass:
Step 1: Find a level surface.
This will help ensure that the compass is level and can accurately measure the direction of magnetic north.
Step 2: Place the watch on the level surface.
Make sure that the watch is facing up and that the compass is pointing in the direction of magnetic north.
Step 3: Rotate the watch slowly around its axis.
Do this for about 30 seconds. This will help to demagnetize the watch and allow the compass to recalibrate.
Step 4: Stop rotating the watch.
The compass should now be calibrated and pointing in the direction of magnetic north.
Step 5: Check the calibration.
To do this, point the watch in the direction of a known landmark, such as the sun or a mountain peak. The compass should point to the same direction as the landmark.
Step 6: If the compass is not pointing to the correct direction, repeat steps 1-5.
You may need to rotate the watch more slowly or for a longer period of time. You can also try tapping the watch gently on a hard surface to help demagnetize it.
| Step | Action |
|---|---|
| 1 | Find a level surface. |
| 2 | Place the watch on the level surface. |
| 3 | Rotate the watch slowly around its axis for about 30 seconds. |
| 4 | Stop rotating the watch. |
| 5 | Check the calibration by pointing the watch in the direction of a known landmark. |
| 6 | If the compass is not pointing to the correct direction, repeat steps 1-5. |
Utilizing the Thermometer and Barometer
Displaying the Temperature
To display the current temperature, press the “MODE” button until the display shows “TEMP”. The temperature will be displayed in either Fahrenheit or Celsius, depending on the setting. To change the temperature unit, press the “ADJ” button.
Displaying the Barometer
To display the current barometric pressure, press the “MODE” button until the display shows “BARO”. The pressure will be displayed in inches of mercury (inHg), millibars (mb), or hectopascals (hPa), depending on the setting. To change the pressure unit, press the “ADJ” button.
Calculating Altitude
The altimeter function can be used to estimate altitude based on barometric pressure. To use this function, you must first set the sea level pressure. To do this, press the “MODE” button until the display shows “ALT”. Then, press the “ADJ” button to enter the setting mode. Use the “UP” and “DOWN” buttons to adjust the sea level pressure to the current local pressure. Once the sea level pressure is set, the altimeter will display the estimated altitude.
Interpreting the Barometer Reading
The barometric pressure can provide an indication of upcoming weather conditions. A rising barometer indicates improving weather conditions, while a falling barometer indicates deteriorating weather conditions. The following table provides a general guide to interpreting barometer readings:
| Barometer Reading | Weather Condition |
|---|---|
| Rising | Improving weather, fair or clear |
| Steady | Stable weather, no significant changes expected |
| Falling | Deteriorating weather, possible rain or snow |
| Rapidly Falling | Severe weather, such as a storm or hurricane |
Troubleshooting Common Issues
1. The watch isn’t turning on.
This issue can often be resolved by replacing the battery.
2. The time is wrong.
To correct the time, set the hour and minute hands manually.
3. The buttons aren’t working.
The buttons may be jammed or dirty. Clean them with a soft brush.
4. The display is dim or difficult to read.
This issue can often be resolved by cleaning the watch crystal.
5. The watch is leaking water.
The seals around the watch case may be damaged. Take the watch to a jeweler to have them replaced.
6. The watch has stopped working after a period of inactivity.
The battery may have drained. Replace the battery.
7. The watch is making a noise.
The movement or other parts of the watch may be damaged. Take the watch to a jeweler to have it repaired.
8. The watch face is cracked or scratched.
The watch crystal can be repaired or replaced by a jeweler. You can also extend the watch’s lifespan with a screen protector.
| Type of Scratch | Repair Recommendation | Possible Cost |
|---|---|---|
| Superficial scratch | Can be removed with a polishing cloth | $10-$20 |
| Moderate scratch | Requires professional repair | $30-$50 |
| Deep scratch | May require the watch crystal to be replaced | $50-$100+ |
Resetting to Factory Settings
To reset your Armitron Pro Sport 40/8417 ZM1212 to its factory settings, follow these steps:
1. Press the Mode Button
Keep pressing the Mode button until the display shows the “RST” (reset) option.
2. Hold the Reset Button
While the “RST” option is displayed, hold down the Reset button for a few seconds.
3. Confirm Reset
The display will show “rSt.” Press the Mode button again to confirm the reset.
4. Enter Setup Mode
After the reset, the watch will enter setup mode. Use the Mode button to navigate through the settings.
5. Set Time
Use the Reset button to adjust the hour, minute, and second settings.
6. Set Date
Use the Reset button to adjust the year, month, and day settings.
7. Set Alarm
Use the Reset button to set the alarm time and alarm mode.
8. Set Stopwatch
Use the Reset button to reset the stopwatch and start/stop the timer.
9. Set Countdown Timer
Use the Reset button to set the countdown time, countdown mode, and sound settings.
The countdown timer settings are as follows:
| Setting | Options |
|---|---|
| Countdown Time | 1 minute to 23 hours and 59 minutes |
| Countdown Mode | Countdown/Countdown Auto Repeat |
| Sound | On/Off |
Care and Maintenance Tips
1. General Care
Handle your watch with care to avoid scratches or damage. Clean it regularly with a soft, damp cloth.
2. Battery Replacement
Replace the battery when necessary, using a qualified watchmaker or jeweler. Do not attempt to replace it yourself.
3. Water Resistance
Your watch is water-resistant up to 50 meters. However, avoid submerging it in water for extended periods or exposing it to high-pressure water.
4. Crystal Protection
The crystal of your watch is made of mineral glass, which is scratch-resistant. However, avoid contact with sharp objects or abrasive surfaces.
5. Strap Care
Clean your watch strap regularly with a damp cloth. If the strap is leather, use a leather conditioner to keep it supple.
6. Avoid Temperature Extremes
Protect your watch from extreme heat or cold, as this can damage its internal components.
7. Storage
When not in use, store your watch in a cool, dry place. Avoid storing it in direct sunlight or near heat sources.
8. Adjustments
If your watch needs adjustment, such as setting the time or date, refer to the user manual or consult a qualified watchmaker.
9. Warranty
Your watch comes with a limited warranty. Refer to the warranty card for specific details and conditions.
10. Troubleshooting
Troubleshooting Tips
| Issue | Possible Solution |
|---|---|
| Watch not working | Check battery, replace if needed |
| Time or date incorrect | Adjust using user manual or consult a watchmaker |
| Water damage | Contact a qualified watchmaker immediately |
How To Set Armitron Pro Sport 40/8417 ZM1212
The Armitron Pro Sport 40/8417 ZM1212 is a versatile and durable timepiece that offers a range of features designed to meet the needs of active individuals. Its user-friendly design makes it easy to set and customize, even for those who are new to using digital watches.
To set the time, press and hold the “Mode” button for three seconds. This will enter the time setting mode, where you can use the “Up” and “Down” buttons to adjust the hour, minute, and second values. Once you have set the correct time, press the “Mode” button again to save your changes.
To set the date, press the “Mode” button once to enter the date setting mode. Use the “Up” and “Down” buttons to adjust the month, day, and year values. Once you have set the correct date, press the “Mode” button again to save your changes.
To set the alarm, press the “Mode” button twice to enter the alarm setting mode. Use the “Up” and “Down” buttons to adjust the hour and minute values for the alarm time. Once you have set the correct alarm time, press the “Mode” button again to save your changes.
People Also Ask About How To Set Armitron Pro Sport 40/8417 ZM1212
How do I set the stopwatch on my Armitron Pro Sport watch?
To set the stopwatch, press the “Start/Stop” button. The stopwatch will start running, and the time will be displayed in the digital display. To stop the stopwatch, press the “Start/Stop” button again. To reset the stopwatch, press the “Reset” button.
How do I change the battery in my Armitron Pro Sport watch?
To change the battery in your Armitron Pro Sport watch, you will need a small Phillips head screwdriver. Open the battery compartment on the back of the watch by unscrewing the four screws. Remove the old battery and replace it with a new one of the same type. Tighten the screws to close the battery compartment.
How do I set the countdown timer on my Armitron Pro Sport watch?
To set the countdown timer, press the “Mode” button three times to enter the timer setting mode. Use the “Up” and “Down” buttons to adjust the hours, minutes, and seconds for the countdown timer. Once you have set the correct countdown time, press the “Mode” button again to save your changes.
