Quilting is a beautiful and rewarding craft, but it can be daunting if you’re new to it. One of the most important steps in quilting is making the binding, which is the fabric that finishes the edges of your quilt. Binding can be made from a variety of fabrics, and there are many different ways to make it. In this article, we’ll show you how to make quilt binding using a simple and easy method. We’ll also provide some tips for choosing the right fabric and making your binding look its best.
The first step in making quilt binding is to choose your fabric. You can use any type of fabric you like, but quilting cotton is a good choice because it’s durable and easy to work with. Once you’ve chosen your fabric, cut it into strips that are 2.5 inches wide. The length of the strips will depend on the size of your quilt. To determine the length of the strips, measure the perimeter of your quilt and add 10 inches. This will give you enough fabric to bind the quilt and have some extra for overlap.
Once you’ve cut the fabric strips, you’ll need to join them together to create a long strip of binding. To do this, lay two strips of fabric right sides together and sew them together along one long edge. Press the seam open and then fold the fabric in half lengthwise, wrong sides together. Press the fold to create a crease. Repeat this process until you have joined all of the fabric strips together. The finished binding strip should be long enough to bind the entire perimeter of your quilt.
How To Make Quilt Binding
Quilt binding is a great way to finish off your quilt and give it a polished look. It can also be a fun and creative way to add a personal touch to your quilt.
There are many different ways to make quilt binding, but the most common method is to use a bias strip. A bias strip is a strip of fabric that is cut on the diagonal, which gives it a stretchy quality that makes it easy to work with.
To make a bias strip, you will need to cut a strip of fabric that is at least twice as wide as the finished binding. Fold the strip in half lengthwise, right sides together, and press. Unfold the strip and fold each side in towards the center crease, pressing as you go. Fold the strip in half again, right sides together, and press.
Once you have made your bias strip, you can begin to apply it to your quilt. Start by pinning the binding to the edge of the quilt, right sides together. Stitch the binding in place, close to the edge of the quilt. Fold the binding over the edge of the quilt and stitch it down on the back side. Trim any excess binding.
People Also Ask About How To Make Quilt Binding
What is the best fabric to use for quilt binding?
The best fabric to use for quilt binding is a medium-weight cotton fabric. Cotton is a durable fabric that is easy to work with, and it will not fray easily. You can also use other fabrics, such as linen, wool, or silk, but these fabrics may be more difficult to work with.
How wide should quilt binding be?
The width of your quilt binding will depend on the size of your quilt. A good rule of thumb is to make the binding 2-1/2 inches wide. This will give you enough fabric to fold over the edge of the quilt and stitch it down on the back side.
Can I use store-bought bias tape for quilt binding?
Yes, you can use store-bought bias tape for quilt binding. However, it is important to note that store-bought bias tape is often made from a lightweight fabric, such as polyester. This fabric may not be as durable as cotton, so it is important to take extra care when stitching it down.
