5 Easy Steps For Lacing Jordan 3s

Stepping into the iconic realm of Jordan 3s, renowned for their bold design and supreme comfort, lacing them correctly becomes an art form in itself. The intricate web of eyelets and laces presents a challenge that, when mastered, elevates the experience of wearing these legendary sneakers. Embark on this guide as we unveil the secrets to lacing Jordan 3s, ensuring a secure, stylish, and personalized fit that will turn heads and leave an imprint on the sneakerverse.

To commence the lacing process, begin by threading the laces through the bottom pair of eyelets from the inside out. Creating an initial crisscross pattern, feed the laces through the second pair of eyelets, this time from the outside in. This alternating pattern continues up the shoe, with the laces crossing over each other to form the foundation of a secure hold. As you progress, pay attention to the tension, ensuring that the laces are snug but not overly tight, allowing for both comfort and support.

Reaching the top pair of eyelets, the lacing technique transitions into a double-loop method, enhancing both style and functionality. Pass the laces through the eyelets from the inside out and then loop them back through themselves, creating a secure knot. Repeat this process with the remaining lace, forming two symmetrical loops that add a touch of flair and prevent the laces from loosening. Finally, trim any excess lace and tuck it into the loops, completing the lacing masterpiece and ensuring a flawless fit.

Tying the Laces

Tying the laces on your Jordan 3 sneakers is a crucial step to ensure a secure and comfortable fit. Here’s a detailed guide to help you achieve the perfect lace-up:

Step 1: Insert the Laces

Begin by threading the laces through the bottom two eyelets on both sides of the shoe. Cross the laces over each other and pull them through the next two eyelets up. Continue this criss-cross pattern until you reach the top eyelets.

Step 2: Tighten the Laces

Once the laces are threaded through all the eyelets, pull on both ends simultaneously to tighten them. Make sure the laces are snug but not so tight that they cut off circulation. Adjust the tightness as needed to find the right balance of support and comfort.

Step 3: Secure the Laces

To ensure the laces stay tied and prevent them from fraying, use a lace lock or a lace knot. Lace locks are small devices that fit over the laces near the top of the shoe, securing them in place. Lace knots involve tying a series of knots with the excess lace, creating a secure hold that prevents the laces from coming undone.

Step 4: Style the Laces

Once the laces are tied, you can customize their style to match your preference. You can tuck the excess lace into the shoe or let it hang loose outside. Some people prefer to create a loop with the excess lace and secure it around the ankle for a more secure fit and a unique aesthetic.

Crossing the Laces

Crossing the laces is a classic way to lace Jordan 3s. It’s a simple and easy method that gives your shoes a clean and polished look. Here’s how to do it:

1. Start by threading the laces through the top two eyelets on the inside of the shoe.
2. Next, cross the laces over each other and thread them through the next two eyelets on the outside of the shoe.
3. Continue crossing the laces over each other and threading them through the remaining eyelets until you reach the top of the shoe.
4. Once you reach the top, tie the laces together in a knot.

Lace Crossing Variations:

There are a few different ways to cross the laces on Jordan 3s. Here are three of the most popular variations:

Lace Crossing Variation	Description
Straight across	The laces are crossed straight across the shoe, from the inside to the outside.
Criss-cross	The laces are crossed over each other in a criss-cross pattern.
Heel loop	The laces are crossed over each other in a heel loop pattern.

Looping the Laces

To loop the laces, start by threading one end of the lace through the top left eyelet on the shoe. Pull the lace all the way through, leaving enough slack to make a small loop. Repeat this process with the other end of the lace, threading it through the top right eyelet. Next, take the end of the lace that is on the left side of the shoe and cross it over the other end, threading it through the second eyelet down on the right side of the shoe. Pull the lace all the way through, leaving enough slack to make another loop. Repeat this process with the other end of the lace, threading it through the second eyelet down on the left side of the shoe.

Continue looping the laces in this manner, alternating between the left and right sides of the shoe, until you reach the desired length. The number of loops required will vary depending on the size of the shoe and the desired fit. Once you have reached the desired length, tie the laces together in a bow or any other desired knot.

Tightening the Knot

Once you’ve laced up your Jordan 3s, it’s time to tighten the knot. Here’s how to do it:

Bring the two ends of the lace together and cross them over each other, forming an “X.”
Take the right-hand end of the lace and pass it through the back of the left-hand loop.
Take the left-hand end of the lace and pass it through the back of the right-hand loop.
Pull on both ends of the lace to tighten the knot.
Repeat steps 1-3 two more times to create a triple knot.

Here’s a table summarizing the steps:

Step	Action
1	Cross the two ends of the lace over each other to form an “X.”
2	Take the right-hand end of the lace and pass it through the back of the left-hand loop.
3	Take the left-hand end of the lace and pass it through the back of the right-hand loop.
4	Pull on both ends of the lace to tighten the knot.
5	Repeat steps 1-3 two more times to create a triple knot.

Creating the Bunny Ears

This technique involves lacing the lower portion of the shoe to form two distinct loops that resemble rabbit ears. Follow these steps to create the bunny ears:

1. Lace the First Row

Start by threading the laces through the first two lace holes at the bottom of the shoe. Cross the laces over each other.

2. Form the Bunny Ears

Thread one lace through the next lace hole on the outside of the shoe, while threading the other lace through the lace hole on the inside of the shoe. Pull both laces tight to create a loop on each side.

3. Secure the Ears

Feed the lace on the outside of the shoe through the lace hole above the first loop. Repeat this step with the lace on the inside of the shoe, creating a second loop.

4. Cross the Ears

Cross the two loops over each other, starting with the loop on the outside of the shoe over the loop on the inside. Feed the laces through the lace holes at the top of the loops to secure them.

5. Complete the Lacing

Continue lacing the shoe normally up the tongue, ensuring that the bunny ears remain in place. Adjust the laces as necessary to tighten or loosen the fit.

Bunny Ear Lace Instructions
Lace the first row, crossing the laces over
Form the bunny ears by lacing outwards and inwards
Secure the ears by lacing through the holes above the loops
Cross the ears and lace through the top holes
Continue lacing normally up the tongue

6. Finishing Touches

Once you reach the top of the shoe, tie the laces securely. To enhance the bunny ear effect, you can double knot the laces or add a loop at the end of each ear.

Wrapping the Bunny Ears

This step is crucial for creating that signature Jordan 3 look. Here’s how it’s done:

1. Cross the laces under the first set of eyelets

Take the end of the left lace and cross it over the end of the right lace, bringing it down and through the first eyelet on the left.

2. Repeat on the right side

Repeat this step on the right side, bringing the end of the right lace up and through the first eyelet on the right.

3. Create two loops

With the ends of the laces now dangling outside the first set of eyelets, form two loops. These loops are the “bunny ears.”

4. Cross the bunny ears

Take the right bunny ear and cross it over the left bunny ear, bringing it across the top of the shoe.

5. Tuck the right bunny ear under

Tuck the right bunny ear under the crossed laces on the left, bringing it down through the second set of eyelets on the left.

6. Repeat and adjust

Repeat steps 3 to 5 with the left bunny ear, this time tucking it under the crossed laces on the right. Adjust the tension of the bunny ears to create the desired tightness and look.

Left Lace	Right Lace
• Cross under the first eyelet on the left.	• Cross over under the first eyelet on the right.
• Create a loop.	• Create a loop.
• Cross over the right loop.	• Tuck under the crossed laces on the left (through the second eyelet).
• Tuck under the crossed laces on the right (through the second eyelet).

Finishing the Knot

7. **Tightening the Knot:**

Step	Description
a.	Pull both loose ends of the laces taut to snugly fit the shoes around your feet.
b.	Form a loop at one end of the laces and pass the other end through it.
c.	Tighten the laces by pulling on both ends simultaneously.
d.	Double-knot the ends by making another loop and passing the loose end through it.
e.	Tighten the double knot firmly to prevent it from coming undone.

By following these detailed steps, you can achieve a neat and secure lace-up for your Jordan 3 sneakers.

Securing the Laces

Once the laces are threaded through the top eyelets, it’s time to secure them. There are several ways to do this, but the most common is to tie the laces together in a simple knot. To do this, simply cross the two lace ends over each other and pull them tight. You can also double knot the laces for extra security.

9. Tucking the Laces

The final step is to tuck the lace ends away so they don’t get in the way. There are a few different ways to tuck the laces, but the most common is to simply tuck them inside the shoe. To do this, simply push the lace ends down into the shoe, behind the tongue. You can also tuck the laces under the lace loops on the tongue for a more secure hold.

Lace Style	Instructions
Simple Knot	Cross the two lace ends over each other and pull them tight.
Double Knot	Tie a simple knot, then cross the two lace ends over the knot and pull them tight.
Tucked Inside the Shoe	Push the lace ends down into the shoe, behind the tongue.
Tucked Under the Lace Loops	Tuck the lace ends under the lace loops on the tongue for a more secure hold.

Styling the Laces

The Jordan 3 is a classic sneaker that can be styled in a variety of ways. One of the most important aspects of styling the Jordan 3 is the way you lace them. There are many different ways to lace your Jordan 3s, so you can find a style that suits your personality and your outfit.

Here are 10 different ways to lace your Jordan 3s:

Standard lacing: This is the most common way to lace your Jordan 3s. Start by threading the lace through the bottom two lace holes on one side of the shoe. Then, cross the laces over and thread them through the next two lace holes on the other side of the shoe. Continue this pattern until you reach the top of the shoe.
Criss-cross lacing: This is a variation of the standard lacing that creates a criss-cross pattern on the front of the shoe. Start by threading the lace through the bottom two lace holes on one side of the shoe. Then, cross the laces over and thread them through the next two lace holes on the opposite side of the shoe. Continue this pattern until you reach the top of the shoe.
Straight lacing: This is a simple and clean way to lace your Jordan 3s. Start by threading the lace through the bottom two lace holes on one side of the shoe. Then, thread the lace straight up through the next two lace holes on the same side of the shoe. Continue this pattern until you reach the top of the shoe.
Lace locks: This is a great way to add a unique touch to your Jordan 3s. Start by threading the lace through the bottom two lace holes on one side of the shoe. Then, make a small loop with the lace and thread the other end of the lace through the loop. Pull the lace tight to create a lock. Repeat this process for the other side of the shoe.
Lace loops: This is a variation of the lace locks that creates a more decorative look. Start by threading the lace through the bottom two lace holes on one side of the shoe. Then, make a small loop with the lace and thread the other end of the lace through the loop. Pull the lace tight to create a lock. Repeat this process for the other side of the shoe, but make the loops slightly larger. You can also add beads or charms to the loops for a more personalized look.
Lace wrap: This is a great way to add some extra flair to your Jordan 3s. Start by threading the lace through the bottom two lace holes on one side of the shoe. Then, wrap the lace around the ankle and thread it through the top two lace holes on the other side of the shoe. Repeat this process for the other side of the shoe.
Lace tuck: This is a simple and elegant way to lace your Jordan 3s. Start by threading the lace through the bottom two lace holes on one side of the shoe. Then, tuck the lace under the tongue of the shoe and thread it through the next two lace holes. Continue this pattern until you reach the top of the shoe.
Lace braid: This is a more advanced lacing technique that creates a unique and eye-catching look. Start by braiding the lace into a three-strand braid. Then, thread the braid through the lace holes on the shoe. You can also add beads or charms to the braid for a more personalized look.
Lace web: This is a complex and time-consuming lacing technique that creates a web-like pattern on the shoe. Start by threading the lace through the bottom two lace holes on one side of the shoe. Then, cross the laces over and thread them through the next two lace holes on the opposite side of the shoe. Continue this pattern until you reach the top of the shoe. Then, start threading the lace through the lace holes in a criss-cross pattern, creating a web-like effect.
Lace maze: This is a challenging and unique lacing technique that creates a maze-like pattern on the shoe. Start by threading the lace through the bottom two lace holes on one side of the shoe. Then, thread the lace through the next two lace holes on the same side of the shoe, but in the opposite direction. Continue this pattern until you reach the top of the shoe. Then, start threading the lace through the lace holes in a random pattern, creating a maze-like effect.

How to Lace Jordan 3

The Jordan 3 is a classic sneaker that has been popular for decades. It’s a versatile shoe that can be dressed up or down, and it’s perfect for a variety of occasions. If you’re looking to lace your Jordan 3s like a pro, here are a few tips:

1. Start by threading the laces through the bottom two eyelets.
2. Criss-cross the laces over the third and fourth eyelets.
3. Pull the laces through the fifth and sixth eyelets.
4. Criss-cross the laces over the seventh and eighth eyelets.
5. Pull the laces through the ninth and tenth eyelets.
6. Criss-cross the laces over the eleventh and twelfth eyelets.
7. Tie the laces in a bow or knot.