5 Easy Ways to Boost Your Frames in First Descendant

In the realm of First Descendant, maximizing your frames per second (FPS) is crucial for an optimal gaming experience. Higher FPS translates to smoother gameplay, reduced input lag, and a competitive edge in online battles. However, achieving high FPS can be a daunting task, especially for those with limited hardware resources. Fear not, for in this comprehensive guide, we delve into the intricacies of increasing your FPS in First Descendant, empowering you to unlock a seamless and immersive gaming experience.

First and foremost, it is essential to assess your hardware capabilities. Determine the specifications of your graphics card, processor, and RAM. This information will help you establish a baseline for potential optimization. If your hardware meets the minimum requirements for First Descendant, you can proceed to fine-tune your settings to eke out every possible frame.

Graphics settings play a significant role in determining your FPS. Begin by lowering the resolution of the game. A lower resolution requires less graphical processing power, resulting in a noticeable FPS boost. Additionally, reducing the number of graphical effects, such as shadows, anti-aliasing, and post-processing, can significantly improve performance. Experiment with different combinations of settings until you find a balance that provides both visual quality and high FPS.

Optimize Graphics Settings

To maximize your FPS in First Descendant, optimizing your graphics settings is crucial. Consider the following steps:

Modify Resolution and Display Mode

Lowering the resolution will reduce the number of pixels your GPU needs to render. Similarly, switching from fullscreen to windowed mode can enhance performance. Here’s a table summarizing the impact of resolution and display mode:

Resolution / Display Mode	Effect on FPS
High resolution / Fullscreen	Decreased FPS
Low resolution / Windowed	Increased FPS

Adjust Texture Quality

Textures refer to the surface details of objects in the game. Reducing texture quality can free up GPU resources and boost FPS. Set it to the lowest possible value you can tolerate without compromising visual fidelity.

Lower Anti-Aliasing

Anti-aliasing smooths out jagged edges, but it also increases GPU load. Disable or set anti-aliasing to the lowest level that still provides acceptable image quality. This can significantly improve your FPS.

Update Graphics Drivers

Why Update?

Regularly updating your graphics drivers is crucial for maintaining optimal performance in First Descendant. Graphics drivers are software that allows your computer to communicate with your graphics card, which is responsible for rendering the game’s visuals. Outdated drivers can cause various issues, including low framerates, graphical glitches, and even crashes.

How to Update

Step 1: Identify Your Graphics Card

To update your drivers, you first need to know what graphics card you have. You can find this information in your computer’s settings or by using a third-party tool like GPU-Z.

Step 2: Download the Latest Drivers

Next, visit the website of the manufacturer of your graphics card (e.g., NVIDIA, AMD, or Intel). Navigate to the support or drivers section and search for your specific model. Download the latest available drivers.

Step 3: Install the Drivers

Run the downloaded installer and follow the on-screen instructions. Be sure to select the option to perform a “clean install” to remove any old or corrupt driver files. Restart your computer once the installation is complete.

Updating your graphics drivers is a simple yet effective way to improve your gaming experience in First Descendant. By keeping your drivers up-to-date, you can enjoy smoother gameplay, higher framerates, and a reduced risk of technical issues.

Close Background Applications

Many background applications running on your PC can consume significant system resources, leaving less for games like First Descendant. Closing these applications can free up memory and CPU cycles, resulting in smoother gameplay.

How to Close Background Applications in Windows

1. Press **Ctrl**+**Alt**+**Del** and select **Task Manager**.
<\p>

2. Click on the **Processes** tab.
<\p>

3. Sort the processes by **Memory** or **CPU** usage to identify the most demanding ones.
<\p>

4. Select a non-essential application and click **End task**.
<\p>

Repeat this process for any other applications you wish to close.

Tips for Identifying Non-Essential Applications

Here are some examples of non-essential applications that you can safely close:

Application	Purpose
Discord	Voice and text chat for gamers
Steam	Video game distribution platform
Spotify	Music streaming service
Google Chrome (with multiple tabs open)	Web browser

Note: It’s recommended to keep essential applications like antivirus software, system utilities, and task managers running.

Use Game Boosters

Game boosters are software programs that can help you improve your gaming performance by optimizing your computer’s settings and resources. They can do this by freeing up memory, closing unnecessary programs, and optimizing your graphics settings. There are many different game boosters available, so you’ll need to do some research to find one that works best for you. Once you’ve found a game booster, be sure to read the instructions carefully and follow them closely.

Types of Game Boosters

There are two main types of game boosters:

Hardware boosters work by physically upgrading your computer’s hardware, such as adding more RAM or a better graphics card.
Software boosters work by optimizing your computer’s software settings, such as closing unnecessary programs and adjusting your graphics settings.

How to Use Game Boosters

To use a game booster, follow these steps:

Download and install the game booster.
Open the game booster and follow the instructions on how to use it.
Start your game and see if you notice any improvement in your performance.

Advanced Tips for Using Game Boosters

Use a game booster that is compatible with your computer and game. Not all game boosters are created equal, so it’s important to find one that is designed to work with your specific computer and game. You can usually find this information on the game booster’s website.
Close all unnecessary programs before using a game booster. This will free up memory and resources that can be used by your game.
Adjust your game’s graphics settings to improve performance. You can usually do this by going into the game’s settings menu and adjusting the graphics quality settings.

Defragment Hard Drive

Fragmentation occurs when files are broken up into smaller pieces and stored in different locations on your hard drive. This can slow down your computer because it has to work harder to find and access the different parts of the file. Defragmenting your hard drive will reorganize the files so that they are all stored together in one place, which can improve performance.

To defragment your hard drive:

1. Click on the Start menu and type “defragment” into the search bar.
2. Click on the “Defragment and Optimize Drives” icon.
3. Select the drive that you want to defragment and click on the “Optimize” button.
4. The defragmentation process will begin. It may take some time to complete, depending on the size of your hard drive and the amount of fragmentation.
5. Once the defragmentation process is complete, your computer will restart.

Benefits of Defragmenting Your Hard Drive

There are several benefits to defragmenting your hard drive:

Improved performance: Defragmenting your hard drive can improve performance by reducing the amount of time it takes to find and access files. This can make your computer feel faster and more responsive.
Increased storage space: Defragmenting your hard drive can also increase storage space by consolidating free space into larger blocks. This can make it easier to store large files and programs.
Reduced wear and tear: Defragmenting your hard drive can reduce wear and tear by preventing the read/write heads from having to move around as much. This can help to extend the life of your hard drive.

How Often Should You Defragment Your Hard Drive?

The frequency with which you should defragment your hard drive depends on how often you use your computer and what types of files you store. If you use your computer frequently and store large files or programs, you should defragment your hard drive more often. A good rule of thumb is to defragment your hard drive once a month.

What Are the Risks of Defragmenting Your Hard Drive?

There are some risks associated with defragmenting your hard drive:

Data loss: In rare cases, defragmenting your hard drive can cause data loss. This is most likely to occur if your hard drive is already damaged or if there is a power outage during the defragmentation process.
System instability: Defragmenting your hard drive can also cause system instability, especially if your computer is old or has a lot of hardware problems.

Overclock Graphics Card (Advanced)

Overclocking your graphics card can drastically improve its performance, boosting your FPS in First Descendant. However, this is an advanced technique that requires careful consideration and monitoring. Follow these steps at your own risk:

1. Gather Tools: Download a GPU overclocking tool like MSI Afterburner or EVGA Precision X1.

2. Gradually Increase Core Clock: Start by increasing the core clock by 10-15 MHz and run benchmarks to check for stability and performance improvements.

3. Fine-Tune Memory Clock: Once the core clock is stable, increase the memory clock by 50-100 MHz increments.

4. Test and Monitor: After each adjustment, run benchmarks and monitor temperatures. If you encounter instability or crashes, decrease the overclock settings.

5. Adjust Power Limit and Voltage: If you’re comfortable, you can adjust the power limit and voltage to give your GPU more headroom. However, this should only be done with caution.

6. Optimizing Overclock Settings:

Setting	Effect
Core Clock	Increases GPU processing speed, boosting performance.
Memory Clock	Enhances the rate at which the GPU accesses data from memory, improving FPS.
Power Limit	Provides more power to the GPU, allowing for higher overclocks.
Voltage	Regulates the amount of electricity flowing through the GPU, but only experienced users should adjust this.

Remember: Overclocking can void your GPU warranty and potentially damage your hardware. Proceed with caution and only attempt this if you’re comfortable with the risks.

Disable Motion Blur

Motion blur adds a cinematic effect to games, blurring objects in motion to simulate realism. However, it can introduce blurriness to fast-moving scenes, potentially decreasing visibility and making it harder to track targets. Disabling motion blur can improve clarity and reduce input lag, especially in competitive multiplayer scenarios.

To disable motion blur in First Descendant:

Open the game’s Settings menu.
Navigate to the "Graphics" tab.
Find the "Motion Blur" option and set it to "Disabled."

Disable VSync

VSync (Vertical Synchronization) is a technology that syncs the game’s frame rate to the refresh rate of your monitor. This can prevent screen tearing, where parts of the画面 appear torn or misaligned. However, VSync can introduce input lag and limit your frame rate to the refresh rate of your monitor, which can be a problem for high-refresh-rate monitors.

To disable VSync in First Descendant:

Open the game’s Settings menu.
Navigate to the "Graphics" tab.
Find the "VSync" option and set it to "Disabled."

Other Performance-Enhancing Tips

In addition to disabling motion blur and VSync, there are several other tips you can follow to improve performance in First Descendant:

Lower your graphics settings: Reducing the quality of textures, shadows, and other graphical effects can free up resources and improve performance.
Close unnecessary background programs: Closing background programs that consume system resources can make more power available for the game.
Update your graphics drivers: Keeping your graphics drivers up to date ensures optimal compatibility and performance with the game.
Verify the integrity of your game files: Corrupted or missing game files can cause performance issues. Verifying the game files through Steam or your game launcher can fix these problems.
Optimize your PC: Defragmenting your hard drive, running a malware scan, and closing unnecessary background processes can improve overall performance.
Use a wired connection: A wired internet connection provides a more stable connection than Wi-Fi, which can reduce lag and improve performance in multiplayer games.
Enable XMP or DOCP: If your motherboard supports XMP (Intel) or DOCP (AMD), enabling this setting can overclock your RAM, improving performance.

Adjust Windows Power Plan

Windows Power Plan can be adjusted to improve performance and increase FPS in First Descendant. Follow these steps:

1. Right-click on the battery icon in the taskbar.

2. Go to “Power Options”.

3. Click on “Edit plan settings”.

4. Select “Change advanced power settings”.

5. Expand the “Processor power management” section.

6. Set the “Minimum processor state” to 100%.

7. Set the “Maximum processor state” to 100%.

8. Expand the “Hard disk” section and set the “Turn off hard disk after” to never.

Property	Value
Minimum processor state	100%
Maximum processor state	100%
Turn off hard disk after	Never

Enable Game Mode in Windows 10/11

Windows 10 and 11 include a Game Mode feature that can optimize your PC’s performance for gaming. When enabled, Game Mode can:

Allocate more CPU and GPU resources to games.
Prioritize game traffic over other network traffic.
Disable unnecessary background processes.

To enable Game Mode, follow these steps:

Open the Settings app.
Click on the “Gaming” tab.
Select the “Game Mode” tab.
Turn on the “Game Mode” switch.
Click the “Add a game” button to add games to Game Mode.
Click the “Browse” button to select the .exe file for the game.
Once the game is added, it will appear in the list of games in Game Mode.
To enable Game Mode for a game, simply click the “Enable Game Mode” button next to the game.
Game Mode will now be enabled for the selected game.

Here is a table summarizing the steps to enable Game Mode:

Step	Action
1	Open the Settings app.
2	Click on the “Gaming” tab.
3	Select the “Game Mode” tab.
4	Turn on the “Game Mode” switch.
5	Click the “Add a game” button.
6	Click the “Browse” button.
7	Select the .exe file for the game.
8	Once the game is added, it will appear in the list of games in Game Mode.
9	To enable Game Mode for a game, simply click the “Enable Game Mode” button next to the game.

Consider Hardware Upgrades

1. Upgrade Your Graphics Card

A graphics card (GPU) is responsible for rendering images and videos. A more powerful GPU will result in smoother frame rates. Consider investing in a mid-range or high-end GPU, depending on your budget and target frame rate.

2. Enhance Your Processor

A processor (CPU) handles the game’s calculations and instructions. A faster CPU will reduce stuttering and improve overall performance. Opt for a modern processor with a high clock speed and multiple cores.

3. Increase RAM Capacity

Random access memory (RAM) stores data used by the game. Insufficient RAM can cause slowdowns and crashes. Aim for at least 16GB of RAM, and consider 32GB or more if you experience persistent frame drops.

4. Upgrade to an SSD

A solid-state drive (SSD) has significantly faster read and write speeds compared to a hard disk drive (HDD). Installing the game on an SSD reduces loading times and improves overall game performance.

5. Optimize Your Cooling

Excessive heat can lead to throttling and reduced performance. Ensure adequate cooling by using a high-quality CPU cooler, cleaning out your case regularly, and ensuring proper airflow.

6. Monitor Your System

Use task management tools to monitor your system’s performance. Identify which components are causing bottlenecks and focus on upgrading those.

7. Check for Background Programs

Close any unnecessary background programs that may consume resources and interfere with the game’s performance.

8. Disable Game Overlays

Game overlays, such as Discord or GeForce Experience, can affect performance. Disable them while playing to minimize interruptions.

9. Update Your Drivers

Regularly update your graphics card and motherboard drivers to ensure optimal performance and fix any potential issues.

10. Considerations for Specific Components:

Consider the following guidelines when upgrading specific components to maximize frame rates:

Component	Recommended Specifications
Graphics Card	NVIDIA GeForce GTX 1660 Ti or AMD Radeon RX 5600 XT
Processor	Intel Core i5-9600K or AMD Ryzen 5 3600
RAM	16GB or more, preferably dual-channel
SSD	500GB or more, NVMe M.2 preferred
CPU Cooler	Air cooler with a double or triple fan design

First Descendant: How to Gain More Frames

In First Descendant, frames are an important resource that determine how smoothly and efficiently the game runs. Here are some tips to optimize your frame rate and improve your gaming experience:

Update your graphics drivers: Outdated drivers can cause performance issues, so it’s essential to keep your graphics drivers up to date.
Lower your graphics settings: Reducing the graphics quality settings, such as resolution, shadow detail, and anti-aliasing, can significantly improve frame rate.
Check your CPU and RAM usage: High CPU or RAM usage can bottleneck performance and cause frame drops. Ensure your computer meets the minimum system requirements for the game.
Use an FPS monitor: Monitor your frame rate using an FPS monitor tool to identify performance issues and pinpoint areas where optimization is needed.
Disable unnecessary background programs: Close any programs running in the background that may consume CPU or RAM, such as web browsers or video players.
Enable Game Mode in Windows: Windows 10 and 11 have a dedicated Game Mode that prioritizes game performance by reducing background processes.
Consider overclocking your hardware: Overclocking your CPU or GPU can provide a performance boost, but do so cautiously as it can lead to hardware damage if not done properly.