Unlock the Power of Sampling: Unleash Creativity with Rekordbox’s Sampler Function
Immerse yourself in the world of music creation and manipulation with Rekordbox’s exceptional Sampler feature. This groundbreaking tool grants you the ability to seamlessly integrate samples into your DJ performances, allowing you to weave sonic tapestries that captivate your audience. By seamlessly incorporating loops, one-shots, and even entire tracks into your mixes, you can add an unparalleled layer of depth and originality to your sets.
Activating the Sampler in Rekordbox is a simple and straightforward process that empowers you to unlock its full potential. With just a few clicks, you can access a vast library of samples, ranging from classic drum breaks to cutting-edge synth melodies. Whether you’re a seasoned pro or just starting your DJ journey, the Sampler’s intuitive interface makes it easy to navigate and incorporate samples into your workflow.
Connecting Your Sampler to Rekordbox
For the first method, connect your sampler to your computer using a USB cable. Make sure that the sampler is turned on and that the USB drivers are installed. Open Rekordbox and click on the “Preferences” tab. In the “External Devices” section, click on the “Add” button. A list of available devices will appear, and you should select your sampler from the list. Click on the “OK” button to close the Preferences window. You should now be able to access your sampler in Rekordbox.
For the second method, connect your sampler to your computer using a MIDI cable. Open Rekordbox and click on the “Preferences” tab. In the “MIDI Settings” section, select your sampler from the “MIDI Input” drop-down menu. Click on the “OK” button to close the Preferences window. You should now be able to control your sampler using the MIDI controls in Rekordbox.
Here is a table summarizing the steps for connecting your sampler to Rekordbox:
| Method | Steps |
|---|---|
| USB | Connect your sampler to your computer using a USB cable. Open Rekordbox and click on the “Preferences” tab. In the “External Devices” section, click on the “Add” button. Select your sampler from the list and click on the “OK” button. |
| MIDI | Connect your sampler to your computer using a MIDI cable. Open Rekordbox and click on the “Preferences” tab. In the “MIDI Settings” section, select your sampler from the “MIDI Input” drop-down menu and click on the “OK” button. |
Importing Samples into Rekordbox
Importing samples into Rekordbox is essential for using the Sampler feature. To do this, follow these steps:
1. Create a New Sampler Deck
Start by creating a new Sampler deck in Rekordbox. To do this, click on the “+” icon in the “Decks” section and select “Sampler.” You can also use the keyboard shortcut “Alt + S” (Windows) or “Option + S” (Mac).
2. Open the Sample Library
Once you have created a Sampler deck, click on the “Sample Library” button at the bottom of the screen. This will open a new window with your sample library.
3. Import Samples
There are three ways to import samples into Rekordbox:
- Drag and Drop: Simply drag and drop the samples you want to import from your computer or external drive into the Sample Library window.
- Browse and Add: Click on the “Browse” button at the bottom of the Sample Library window and navigate to the location of your samples. Select the samples you want to import and click on the “Add” button.
- Use the Import Function: From the Rekordbox menu bar, select “File > Import.” Navigate to the location of your samples and select the files you want to import. Click on the “Import” button to add the samples to your Sample Library.
The table below compares the three import methods:
| Method | Advantages | Disadvantages |
|---|---|---|
| Drag and Drop | Quick and easy | May require multiple steps if importing a large number of samples |
| Browse and Add | Allows for more precise file selection | Can be time-consuming if importing a large number of samples |
| Use the Import Function | Most efficient method for importing a large number of samples | Requires additional steps to locate and select samples |
Assigning Samples to Sampler Pads
To assign samples to the sampler pads, simply drag and drop the desired sample onto the corresponding pad in the Sampler section of the Rekordbox interface. You can also right-click on a pad and select “Assign Sample” from the menu to browse for a sample on your computer.
Once a sample is assigned to a pad, you can use the following parameters to control its playback:
- Volume: Adjust the volume of the sample.
- Pitch: Adjust the pitch of the sample.
- Start Point: Set the start point of the sample.
- End Point: Set the end point of the sample.
- Reverse: Reverse the playback of the sample.
Advanced Sample Editing
In addition to the basic parameters, you can also use the built-in sampler editor to perform advanced editing on your samples. To access the sampler editor, right-click on a sample pad and select “Edit Sample” from the menu.
The sampler editor provides a waveform view of the sample, along with a number of editing tools. You can use these tools to perform the following tasks:
- Trim the sample: Drag the start and end points to adjust the length of the sample.
- Fade in/out the sample: Use the fade handles to create smooth fade-in and fade-out effects.
- Normalize the sample: Adjust the volume of the sample to its maximum level.
- Reverse the sample: Click the “Reverse” button to reverse the playback of the sample.
- Loop the sample: Set the loop points to create a repeating loop.
Creating a Sampler Deck
Once you have assigned samples to the sampler pads, you can create a Sampler Deck to control the playback of the samples. To create a Sampler Deck, click on the “Add Deck” button in the Rekordbox interface and select “Sampler” from the menu.
The Sampler Deck provides the following controls:
- Sampler Pad Launch Buttons: Trigger the playback of the samples assigned to each pad.
- Volume Fader: Adjust the overall volume of the Sampler Deck.
- Effects: Apply effects to the Sampler Deck, such as reverb, delay, and EQ.
Using the Sampler with Effect Plugins
To apply effect plugins to your sampler, you’ll need to first create a new sampler in Rekordbox. Once you have created a sampler, you can load a sample into it by dragging and dropping a file from your computer into the sampler’s window. Once you have loaded a sample, you can apply effect plugins to it by clicking on the “Effects” tab in the sampler’s window.
There are a variety of effect plugins that you can use with your sampler, including reverb, delay, distortion, and EQ. To add an effect plugin to your sampler, simply click on the “Add” button in the “Effects” tab and select the plugin you want to use from the list. You can then adjust the settings of the plugin to fine-tune the effect that it applies to your sample.
You can apply multiple effect plugins to your sampler, and you can also adjust the order in which the plugins are applied. To change the order of the plugins, simply drag and drop them in the “Effects” tab.
Here is a table with some of the most popular effect plugins that you can use with your sampler:
| Plugin | Description |
|---|---|
| Reverb | Adds a reverberant effect to your sample, making it sound as if it’s playing in a large space. |
| Delay | Adds a delay effect to your sample, creating a sense of space and depth. |
| Distortion | Adds a distorted effect to your sample, creating a warm, overdriven sound. |
| EQ | Allows you to adjust the frequency response of your sample, making it sound brighter, darker, or more balanced. |
Saving and Recalling Sampler Configurations
To save or recall a sampler configuration, follow these steps.
- Open the Sampler window.
- To save a configuration, click the Save button in the Sampler window.
- In the Save Sampler Configuration dialog box, enter a name for the configuration and click the Save button.
- To recall a configuration, click the Load button in the Sampler window.
- In the Load Sampler Configuration dialog box, select the configuration you want to load and click the Load button.
- You can also save and recall configurations using the following keyboard shortcuts:
- Ctrl+S (Windows) or Cmd+S (Mac) to save a configuration.
- Ctrl+L (Windows) or Cmd+L (Mac) to load a configuration.
- You can also save and recall configurations within a project. To do this, first open the project in which you want to save or recall a configuration. Then, open the Sampler window and follow the steps above to save or recall a configuration. The configuration will be saved or recalled within the project file.
Loading Samples
To load a sample into the sampler, simply drag and drop the audio file onto the desired deck. You can also use the “Load Sample” button to browse and select a sample from your computer. Once a sample is loaded, it will appear in the sampler waveform display.
Playing Samples
To play a sample, simply click on the “Play” button. You can also use the keyboard shortcut “Space” to play and stop samples. The sample will play back at the current playback speed and pitch. You can adjust the playback speed and pitch using the controls in the sampler.
Looping Samples
To loop a sample, click on the “Loop” button. The sample will then play back continuously until you click the “Loop” button again. You can also use the keyboard shortcut “L” to toggle looping on and off.
Using Sampler Effects
The sampler comes with a variety of built-in effects that you can use to process your samples. To access the effects, click on the “Effects” button. You can then select from a variety of effects, including EQ, reverb, delay, and distortion. You can also use the “Send” and “Return” controls to route the effects to different outputs.
Advanced Sampler Techniques and Tips
Creating Custom Sample Banks
You can create custom sample banks to organize your samples and make them easier to find. To create a custom sample bank, simply click on the “New Sample Bank” button in the sampler. You can then give the sample bank a name and description. You can also drag and drop samples into the sample bank.
Using the Sampler as a Sequencer
The sampler can also be used as a sequencer. To use the sampler as a sequencer, click on the “Sequencer” button. You can then create a sequence of samples that will play back in order. You can also use the sequencer to control the playback speed and pitch of each sample.
Using External Controllers
You can use external controllers to control the sampler. This can give you more flexibility and control over your performance. You can use MIDI controllers, keyboards, or even your computer’s keyboard to control the sampler.
Using the Sampler with Live Instruments
The sampler can also be used with live instruments. You can use the sampler to create backing tracks, add effects to your instruments, or even create live loops. The sampler is a versatile tool that can be used in a variety of creative ways.
Using the Sampler for Sound Design
The sampler can also be used for sound design. You can use the sampler to create new and interesting sounds by manipulating samples. You can also use the sampler to create sound effects or even entire songs.
How To Activate Sampler On Rekordbox
To activate the sampler on Rekordbox, you need to first make sure that you have the latest version of the software installed. Once you have updated Rekordbox, open the software and click on the “Sampler” button located in the top menu bar.
Once you have clicked on the “Sampler” button, the sampler panel will appear on the right-hand side of the screen. In the sampler panel, you will see a list of all the samples that you have loaded into Rekordbox. To activate a sample, simply click on the “Activate” button located next to the sample name.
Once a sample has been activated, you will be able to play it using the sampler controls. You can use the sampler controls to adjust the volume, pitch, and playback speed of the sample. You can also use the sampler controls to create loops and one-shots.
People Also Ask
How do I load samples into Rekordbox?
To load samples into Rekordbox, you can either drag and drop them into the sampler panel or click on the “Load” button located in the sampler panel.
How do I create a loop in the sampler?
To create a loop in the sampler, first select the sample that you want to loop. Then, click on the “Loop” button located in the sampler controls. You can then adjust the length of the loop using the loop controls.
How do I create a one-shot in the sampler?
To create a one-shot in the sampler, first select the sample that you want to use. Then, click on the “One-Shot” button located in the sampler controls.
