Mineralize Skinfinish Natural – Medium Plus is a lightweight, mineral-based powder foundation that provides buildable coverage and a natural-looking finish. It is formulated with a blend of minerals, including mica, silica, and titanium dioxide, which work together to create a smooth, even complexion. The foundation is also oil-free and non-comedogenic, making it suitable for all skin types, even sensitive skin.
To apply Mineralize Skinfinish Natural – Medium Plus, start by preparing your skin with a moisturizer or primer. This will help to create a smooth base for the foundation and prevent it from caking or settling into fine lines. Then, use a brush or sponge to apply the foundation to your face. Start in the center of your face and work your way outwards, blending the foundation into your skin. You can build up the coverage by applying additional layers of foundation, but be sure to blend each layer well.
once you have applied the foundation, you can set it with a powder. This will help to keep the foundation in place and prevent it from smudging or fading. you can use a setting spray to give your makeup a more polished look and help it last longer.
Prepare Your Complexion
Before applying MAC’s Mineralize Skinfinish Natural – Medium Plus, it’s essential to prepare your complexion for an even, flawless base. Here’s a detailed guide to optimize your skin canvas:
Cleanse and Exfoliate
Thoroughly cleanse your face with a gentle cleanser to remove any dirt, oil, or makeup residue. Follow up with an exfoliating scrub to gently remove dead skin cells, promoting a brighter, smoother complexion. This step helps the mineralized powder adhere better to your skin.
Hydrate and Moisturize
After cleansing and exfoliating, apply a hydrating serum to replenish moisture and plump up the skin. This creates a smooth, even surface for the mineral finish to adhere to. Follow with a lightweight moisturizer to seal in the hydration and create a protective barrier against environmental stressors.
Prime Your Skin (Optional)
For an even longer-lasting base, consider applying a primer. A primer helps smooth out skin texture, minimize the appearance of pores, and control oil production. Choose a primer that suits your skin type for optimal results.
By following these steps, you’ll create a well-prepped complexion that’s ready for the flawless application of Mineralize Skinfinish Natural – Medium Plus.
Choose the Correct Shade
To ensure a flawless and natural finish, selecting the right shade of Mineralize Skinfinish Natural – Medium Plus is crucial. This versatile powder comes in a range of shades to complement various skin tones. Here are some tips to help you make the perfect choice:
| Skin Tone | Recommended Shades |
|---|---|
| Fair to Light | Porcelain, Light |
| Light to Medium | Medium, Buff |
| Medium to Tan | Natural, Medium Plus |
| Tan to Deep | Golden, Deep Golden |
If you’re still unsure which shade is right for you, consider visiting a MAC counter or authorized retailer. They can help you test the different shades against your skin to find the perfect match.
Apply Using a Brush
For a more precise application, reach for a fluffy, tapered face brush. Gently dip the brush into the Mineralize Skinfinish Natural Medium Plus and tap off any excess. Apply the product to the desired areas of your face with circular motions, starting from the center and working outward.
Tips for Brush Application
- Choose the Right Brush: Opt for a brush specifically designed for powder application, such as a fluffy face brush or a powder brush with a tapered head.
- Dip and Tap: Gently dip the brush into the Mineralize Skinfinish Natural powder and tap off any excess to avoid applying too much product.
- Circular Motions: Apply the powder in circular motions, starting from the center of your face and blending outward. This technique ensures an even and natural-looking application.
- Build Coverage Gradually: For a more intense finish, apply additional layers of the powder in thin, even strokes. Allow each layer to set before applying the next to prevent caking.
- Set with Spray: To enhance the longevity of your application, finish with a light mist of setting spray. This will help lock in the powder and keep your makeup looking fresh throughout the day.
Start from the Center
Begin applying the highlighter by starting from the center of your face and working your way outwards. This will help to create a natural-looking glow that’s evenly distributed.
Buff Outwardly
Once you’ve applied the highlighter to the center of your face, start buffing it outward with a soft brush or sponge. This will help to blend the highlighter into your skin and create a seamless finish.
Focus on High Points
When applying Mineralize Skinfinish Natural – Medium Plus, focus on highlighting the high points of your face. This includes the cheekbones, brow bone, Cupid’s bow, and bridge of the nose.
Additional Tips
- Use a light hand when applying the highlighter. A little goes a long way!
- If you’re not sure how much highlighter to apply, start with a small amount and build up as needed.
- To achieve a more natural look, apply the highlighter under your foundation.
- For a more dramatic look, apply the highlighter over your foundation.
| Skin Tone | Mineralize Skinfinish Natural Shade |
|---|---|
| Fair | Light |
| Light | Medium |
| Medium | Medium Plus |
| Tan | Deep |
| Deep | Ebony |
Blend Outward and Upward
Step 1: Identify Your Starting Point
Locate the outer edge of your face, where your cheekbone and jawline intersect. This will be your starting point for blending.
Step 2: Use a Fluffy Brush
Opt for a soft, fluffy brush, such as the M·A·C 168 Brush, to achieve a diffused and natural finish.
Step 3: Start From the Outer Edge
Lightly dip your brush into the Mineralize Skinfinish powder and gently tap off any excess. Start applying the product at the outer edge of your face, where your cheekbone and jawline meet.
Step 4: Blend Upwards and Outwards
Using quick, circular motions, blend the powder upwards towards your cheekbone and outwards along your jawline. This will create a lifted and contoured effect.
Step 5: Gradual Application
| Step | Description |
|---|---|
| 1 | Lightly tap the brush into the product and shake off any excess. |
| 2 | Start blending at the outer edge of the face, focusing on the cheekbone and jawline. |
| 3 | Use a circular motion to blend the powder outwards and upwards. |
| 4 | Gently tap the brush again to remove any excess powder. |
| 5 | Repeat steps 2-4 until desired coverage is achieved. |
Use a Light Hand
Mineralize Skinfinish Natural is a highly pigmented powder, so it’s important to use a light hand when applying it. If you apply too much, it can look cakey and unnatural. To avoid this, use a light touch and build up the coverage gradually. You can always add more powder later, but it’s harder to remove it once it’s on.
Here are some tips for using a light hand when applying Mineralize Skinfinish Natural:
- Use a small brush or sponge.
- Dip the brush or sponge into the powder and tap off any excess.
- Apply the powder in light, circular motions.
- Start with a small amount and build up the coverage gradually.
- Don’t be afraid to experiment until you find the right amount of coverage for your skin.
- If you’re not sure whether you’re using too much powder, take a step back and look at your face in a mirror. If you can see any obvious streaks or lines, you’re probably using too much powder.
Brush for a Sheer Finish
Use a fluffy brush to apply Mineralize Skinfinish Natural – Medium Plus. Start in the center of your face and blend outward. This will create a sheer, natural finish.
Buff for a Natural Finish
Use a buffing brush to apply Mineralize Skinfinish Natural – Medium Plus. This will create a more polished, natural finish. Start in the center of your face and blend outward in circular motions. Repeat until you’re happy with the coverage.
Stipple for a Full Coverage Finish
Use a stippling brush to apply Mineralize Skinfinish Natural – Medium Plus. This will create a full coverage finish. Start in the center of your face and blend outward in small, circular motions. Repeat until you’re happy with the coverage.
Use a Light Hand
When applying Mineralize Skinfinish Natural – Medium Plus, be sure to use a light hand. This will help prevent the product from looking cakey.
Start with a Small Amount
Start with a small amount of Mineralize Skinfinish Natural – Medium Plus and build up gradually. This will help you avoid applying too much product.
Blend Well
Be sure to blend Mineralize Skinfinish Natural – Medium Plus well. This will help create a smooth, even finish.
Highlight Your Features
To enhance your natural features and create a radiant complexion, follow these steps on how to apply Mineralize Skinfinish Natural – Medium Plus:
1. Cleanse and Prep Your Skin
Start by thoroughly cleansing your skin to remove any dirt or impurities. Apply your preferred moisturizer to hydrate and create a smooth base for makeup application.
2. Choose the Right Shade
Select the shade of Mineralize Skinfinish Natural that best matches your skin tone. Medium Plus is suitable for medium skin with warm undertones.
3. Apply a Primer (Optional)
If desired, apply a makeup primer to create a gripping surface for your foundation and help control oil production.
4. Apply Your Foundation
Use a brush or sponge to apply your foundation evenly over your face, blending it well into your hairline and jawline.
5. Conceal Imperfections
Address any dark circles, blemishes, or other imperfections with a concealer that matches your skin tone.
6. Set Your Base
Apply a translucent powder to set your foundation and concealer, ensuring they last throughout the day.
7. Create Dimension with Bronzer
Use a bronzer to contour your face and add warmth. Apply it along the hollows of your cheeks, the sides of your nose, and your jawline.
8. Highlight Your Features
Use Mineralize Skinfinish Natural – Medium Plus as a highlighter to emphasize your facial features and create a radiant glow.
| Area | How to Apply |
|---|---|
| Cheekbones | Apply lightly with a brush or sponge to the tops of your cheekbones, blending upwards towards your temples. |
| Brow Bone | Use a small brush to apply a thin line of highlighter along the arch of your brow bone to lift your brows. |
| Cupid’s Bow | Apply a touch of highlighter to the center of your upper lip, above your Cupid’s bow, to create fullness. |
| Bridge of Nose | Apply a thin line of highlighter down the center of your nose to make it appear slimmer. |
| Chin | Apply a small amount of highlighter to the center of your chin to enhance its projection. |
9. Set Your Makeup
Finish your makeup look by lightly spraying it with a setting spray to ensure it stays in place all day.
Set with a Spray
Once you have applied your Mineralize Skinfinish Natural – Medium Plus, you can set it with a spray to ensure it lasts longer and to enhance its glow. Here’s how to do it:
1. Choose a setting spray
There are many different setting sprays available, so choose one that suits your skin type and desired finish. For a natural, dewy look, opt for a spray with hydrating ingredients. If you have oily skin, a matte-finish spray can help control shine.
2. Hold the spray at arm’s length
This will help to distribute the mist evenly over your face. Hold the spray nozzle about six to eight inches away from your skin.
3. Spray in a “T” and “X” pattern
Start by spraying a “T” shape down the centre of your forehead, nose, and chin. Then, spray an “X” shape across your cheeks, starting at the outer corners and moving towards the centre.
4. Let the spray dry naturally
Don’t rub or pat your face after spraying. Allow the spray to dry naturally, which will take a few minutes.
5. Touch up as needed
Throughout the day, you may need to touch up your makeup, especially if you have oily skin or if you’re in a humid environment. To touch up, simply reapply a light layer of Mineralize Skinfinish Natural – Medium Plus and set it with a spray.
6. Here is a more detailed process of applying Mineralize Skinfinish Natural – Medium Plus using a spray:
| Step | Instructions |
|---|---|
| 1 | Prepare your skin by cleansing and moisturizing. |
| 2 | Apply your foundation or BB cream of choice. |
| 3 | Use a fluffy brush to apply Mineralize Skinfinish Natural – Medium Plus to your face. Start at the centre of your forehead and work your way outwards. |
| 4 | Hold a setting spray about six to eight inches away from your face and spray in a “T” and “X” pattern. |
| 5 | Allow the spray to dry naturally for a few minutes. |
| 6 | Touch up as needed throughout the day. |
Reapply As Needed
To maintain a natural, glowing finish throughout the day, you may need to reapply Mineralize Skinfinish Natural – Medium Plus as needed. Here’s a step-by-step guide to reapplication:
- Inspect your skin: Assess your skin’s condition. If it appears shiny or has lost its matte finish, it’s time to reapply.
- Cleanse your brush: Use a brush cleaner or makeup remover to wipe down your brush and remove any excess product or dirt.
- Dip brush into product: Gently tap the brush into the Mineralize Skinfinish Natural – Medium Plus compact, picking up a small amount of product.
- Tap off excess: Tap the brush lightly on the edge of the compact to remove any excess product and ensure an even application.
- Apply to T-zone: Start by applying the product to your T-zone (forehead, nose, and chin), where oiliness tends to occur.
- Blend outwards: Gradually blend the product outwards towards your cheeks, jawline, and neck, creating a seamless finish.
- Build coverage: If you desire a more matte finish, gently pat on additional layers of product until you achieve your desired coverage.
- Check mirror: Regularly check your mirror to ensure even application and avoid over-application, which can lead to a cakey appearance.
- Use light strokes: Apply the product with light, gentle strokes to avoid disturbing the makeup underneath.
- Reapply regularly: Monitor your skin’s condition throughout the day and reapply as necessary to maintain a fresh, natural-looking finish.
How to Apply Mineralize Skinfinish Natural – Medium Plus
To achieve a flawless finish with Mineralize Skinfinish Natural in Medium Plus, follow these steps:
- Prep your skin with your preferred skincare routine.
- Apply a thin layer of foundation or BB cream for added coverage if desired.
- Using a soft, fluffy brush, lightly tap the Mineralize Skinfinish into the lid to loosen the powder.
- Swirl the brush in the powder and tap off any excess.
- Gently apply the powder in circular motions to your face, starting from the center and working your way outwards.
- Build up coverage as needed by applying additional layers.
- Finish with a setting spray to enhance the longevity of your makeup.
People Also Ask
What is the best brush to use with Mineralize Skinfinish Natural?
A soft, fluffy brush, such as the Mac 134 or 150, is recommended for applying Mineralize Skinfinish Natural to achieve a smooth and even finish.
Can I use Mineralize Skinfinish Natural as a setting powder?
Yes, Mineralize Skinfinish Natural can be used as a setting powder to help control shine and extend the wear of your foundation. Apply it over your makeup using a light hand and blend thoroughly.
Is Mineralize Skinfinish Natural suitable for all skin types?
Yes, Mineralize Skinfinish Natural is generally suitable for all skin types, including sensitive skin. It is a non-comedogenic formula that is unlikely to clog pores.
