Tired of yucky tasting coffee or tea? Is your Keurig brewing slower than usual? It might be time to change the water filter. A clean water filter ensures that your Keurig is brewing the best-tasting coffee or tea possible. Plus, it helps to keep your Keurig running smoothly and extends its lifespan. Changing the water filter is a quick and easy process that only takes a few minutes. Here’s a step-by-step guide on how to change a water filter in a Keurig.
First, you need to locate the water filter. The water filter is located in the back of the Keurig, behind the water reservoir. Once you have located the water filter, remove it by pulling it straight out. Next, remove the old water filter from the cartridge holder. To do this, simply press the button on the side of the cartridge holder and pull the old water filter out. Now, insert the new water filter into the cartridge holder. Make sure that the filter is inserted all the way into the holder. Finally, reinsert the cartridge holder into the Keurig. To do this, simply line up the cartridge holder with the slot in the back of the Keurig and push it in until it clicks into place.
Now that you have changed the water filter, you can enjoy delicious, fresh-tasting coffee or tea. Remember to change the water filter every two to three months to ensure that your Keurig is brewing the best-tasting coffee or tea possible.
Locating the Water Filter
The water filter in a Keurig coffee maker is located in the water reservoir. To access the filter, follow these steps:
1. Open the water reservoir lid.
The water reservoir lid is located on the back of the coffee maker. Lift the lid to expose the water reservoir.
2. Locate the water filter.
The water filter is located in the center of the water reservoir. It is a small, cylindrical object with a blue cap. The filter is removable and can be replaced easily with a new one.
| Keurig Model | Water Filter Location | |
|---|---|---|
| K-Mini |
Inside the water reservoir |
|
| K-Classic |
Inside the water reservoir |
|
| K-Select |
Inside the water reservoir |
|
| K-Elite |
Inside the water reservoir |
|
| K-Cafe |
Inside the water reservoir |
|
| K-Supreme |
Inside the water reservoir |
|
| K-Duo |
Inside the water reservoir |
|
| K-Supreme Plus |
Inside the water reservoir |
|
| K-Supreme Plus Smart |
Inside the water reservoir |
|
| K-Compact |
Inside the water reservoir |
|
| K-Express |
Inside the water reservoir |
Installing the New Filter
Step 1: Locate the Filter Housing
Identify the plastic filter housing located behind the water reservoir. It will have a small door or cover that can be opened.
Step 2: Remove the Old Filter
Open the door of the filter housing and grasp the old filter by its handle. Pull it straight out of the housing.
Step 3: Prep the New Filter
Unwrap the new filter from its packaging. Remove any plastic or protective sleeves that may be present.
Step 4: Soak the New Filter
Hold the new filter under cold running water for 20 to 30 seconds. This helps saturate the filter media and prevents air pockets from forming when it is installed.
Step 5: Insert the New Filter
Push the soaked filter into the filter housing, ensuring it is fully inserted. The filter will fit snugly into place.
Step 6: Close the Door
Close the door of the filter housing, ensuring it snaps shut securely.
Step 7: Reset the Filter Indicator
Most Keurig models have a filter indicator light. Press and hold the “Clean” button on the machine for 3 to 5 seconds to reset the indicator.
Priming the Keurig
Once you’ve replaced the water filter, you’ll need to prime the Keurig to remove any air from the system. This will ensure that your Keurig is working properly and that your coffee is brewing at its best.
To prime the Keurig, follow these steps:
- Fill the water reservoir with fresh, cold water.
- Place a mug or carafe under the brew head.
- Press the brew button.
- The Keurig will pump water through the system and out of the brew head.
- Once the water has stopped flowing, the Keurig is primed and ready to use.
| Step | Action |
|---|---|
| 1 | Fill the water reservoir with fresh, cold water. |
| 2 | Place a mug or carafe under the brew head. |
| 3 | Press the brew button. |
| 4 | The Keurig will pump water through the system and out of the brew head. |
| 5 | Once the water has stopped flowing, the Keurig is primed and ready to use. |
Troubleshooting Common Issues
Water Filter Reset Not Working
After installing a new filter, ensure that the reset button has been pressed. If the reset button is already pressed but the “Replace Filter” light remains illuminated, try resetting it again. Depress the reset button for 5 seconds, then release it. If the light persists, you may need to replace the water filter assembly.
Water Leaking from the Bottom of the Machine
Inspect the water reservoir for any cracks or leaks. If the reservoir is damaged, replace it with a new one. Additionally, check the silicone ring around the water filter housing for any tears or breaks. If damaged, replace the silicone ring.
Reduced Water Flow
A clogged water filter can restrict water flow. Replace the water filter with a new one. If the issue persists, descale the machine according to the manufacturer’s instructions. Scale buildup in the internal water lines can also reduce water flow.
Unusual Noises During Brewing
A faulty or clogged water pump can produce unusual noises during the brewing process. Clean or replace the water pump as needed. Air bubbles in the water lines can also cause strange noises. Run a cleaning cycle to eliminate any air bubbles.
“Replace Filter” Light Remains On
After installing a new filter, ensure that the reset button has been pressed for at least 5 seconds. If the light remains on, the filter may not be properly installed. Remove the water filter and reinstall it, ensuring it is securely seated.
Water Tastes Strange
Replace the water filter with a new one. The current filter may be exhausted or contaminated, leading to an unpleasant taste in the water. Additionally, descale the machine to remove any mineral buildup that could affect the water flavor.
Maintaining Your Keurig Filter
To ensure your Keurig coffee maker continues to perform at its best, it’s crucial to maintain the water filter regularly. Below are the essential steps to follow:
1. Gather Necessary Materials
You’ll need a replacement water filter and a clean cloth or towel.
2. Remove the Water Filter
Open the water reservoir lid and locate the water filter. Pull it straight out.
3. Insert a New Water Filter
Take the new filter and soak it in room-temperature water for 5 minutes. Then, insert it into the water reservoir with the notched end facing down.
4. Run a Rinse Cycle
Fill the water reservoir and place a large mug on the drip tray. Run a rinse cycle without inserting a coffee pod.
5. Run a Clean Cycle
Fill the water reservoir again and run a clean cycle with a Descaling Solution. Follow the instructions on the solution packaging.
6. Repeat Rinse Cycle
Once the clean cycle is complete, run another rinse cycle to remove any remaining solution.
7. Replace Reservoir Lid
Close the water reservoir lid and discard the used rinse water.
8. Customize Water Filter Settings
Some Keurig models allow you to customize the water filter settings. Refer to your user manual for specific instructions on how to adjust the settings based on your water hardness. The following table provides general guidelines:
| Water Hardness Level | Filter Setting |
|---|---|
| Soft | Level 1 |
| Medium | Level 2 |
| Hard | Level 3 |
Benefits of Regular Filter Changes
Regularly changing your Keurig water filter offers numerous benefits:
- Improved Taste: A clean filter removes impurities and contaminants, resulting in a noticeable improvement in the taste of your coffee.
- Reduced Scale Buildup: Minerals in water can accumulate over time, causing scale buildup in your Keurig. Regular filter changes prevent this buildup, extending the life of your machine.
- Protects Against Bacteria Growth: Carbon filters effectively remove bacteria and other microorganisms that can grow in stagnant water, ensuring the safety of your brewed coffee.
- Enhanced Coffee Extraction: Clean water allows for optimal coffee extraction, resulting in a richer and more flavorful brew.
- Healthier Brew: Removing impurities from the water reduces the presence of potentially harmful contaminants in your coffee.
- Cost Savings: By extending the lifespan of your Keurig and preventing costly repairs, regular filter changes save you money in the long run.
- Remove the water reservoir.
- Pull the old filter straight down.
- Insert the new filter by pushing it straight up until it clicks into place.
- Rinse the filter for 10-12 cycles by running water without a K-Cup.
- Turn off and unplug your Keurig. This is important for safety reasons.
- Remove the water reservoir. The water reservoir is located at the back of the Keurig. Lift the handle to remove it.
- Remove the old filter. The old filter is located inside the water reservoir. Grip the filter and pull it straight up to remove it.
- Insert the new filter. Take the new filter and insert it into the water reservoir. Make sure that the filter is properly aligned and seated in the reservoir.
- Fill the water reservoir with fresh water. Fill the water reservoir to the “Max” line with fresh, cold water.
- Replace the water reservoir. Place the water reservoir back into the Keurig and lower the handle to lock it in place.
- Run a cleaning cycle. With the water reservoir in place, turn on the Keurig and press the “Clean” button. The Keurig will run a cleaning cycle to remove any impurities from the system.
- Enjoy your coffee! Your Keurig is now ready to brew fresh, delicious coffee.
- Decreased coffee quality
- Cloudy or discolored water
- A build-up of scale on the heating element
Frequency and Type of Filter
The frequency of filter changes depends on the usage and water quality. It’s generally recommended to change the filter every 2-3 months or after approximately 60 uses. Keurig offers a range of filter options, each designed for different water conditions. Select the appropriate filter based on the water hardness in your area.
Easy Filter Replacement
Changing the filter is a straightforward process:
Filter replacement takes only a few minutes and significantly enhances the quality of your Keurig coffee experience. By following these simple steps, you can ensure that your Keurig brews the cleanest, most flavorful coffee.
How to Change a Water Filter in a Keurig
Changing the water filter in your Keurig is a simple task that can help keep your coffee tasting fresh and your machine running smoothly. Here are the steps on how to do it:
People Also Ask About How to Change a Water Filter in a Keurig
How often should I change the water filter in my Keurig?
You should change the water filter in your Keurig every 2-3 months, or more often if you have hard water.
What type of water filter should I use in my Keurig?
Keurig recommends using a Keurig-branded water filter. These filters are designed to fit perfectly in the Keurig water reservoir and remove impurities from the water.
Can I use tap water in my Keurig?
Yes, you can use tap water in your Keurig. However, it is important to change the water filter regularly to remove any impurities from the water.
What happens if I don’t change the water filter in my Keurig?
If you don’t change the water filter in your Keurig, the impurities in the water can build up and cause the machine to malfunction. This can lead to decreased coffee quality and a shorter lifespan for the machine.
How do I know if the water filter in my Keurig needs to be changed?
There are a few signs that indicate that the water filter in your Keurig needs to be changed. These include:
