Maintaining your Canon PIXMA TS3522 printer is essential to ensure optimal performance and prevent costly repairs. Replacing the ink cartridges is a crucial part of this maintenance, and it’s a task that can be easily accomplished with a few simple steps. Whether you’re experiencing print quality issues or simply need to replenish the ink supply, this comprehensive guide will provide you with the necessary instructions to change the cartridges quickly and efficiently.
The Canon PIXMA TS3522 printer uses two types of ink cartridges: one for black ink and one for color ink. The black cartridge is responsible for printing text and grayscale images, while the color cartridge is used for printing color images and graphics. When either of these cartridges is empty or low on ink, the printer will display an error message on its LCD screen. To resolve this issue, you’ll need to replace the empty or low cartridge with a new one.
Before you begin the cartridge replacement process, gather the necessary materials. You’ll need a new Canon black ink cartridge (CLI-251BK) and a new Canon color ink cartridge (CLI-251C). Once you have the new cartridges, you can follow the step-by-step instructions provided in the next section of this guide. By carefully following these instructions, you can ensure that the cartridge replacement process is completed safely and correctly, allowing you to resume printing with your Canon PIXMA TS3522 printer in no time.
Replacing the Black Cartridge
Replacing the black cartridge on a Canon Pixma TS3522 printer is a straightforward task that can be completed in a few simple steps. Here are the detailed instructions:
-
Locate the Cartridge Compartment
Locate the cartridge compartment on the front of the printer. It is usually covered by a plastic flap or door. Gently open the flap or door to reveal the cartridge holder.
-
Remove the Old Cartridge
Once the cartridge holder is accessible, gently squeeze the tabs on both sides of the old black cartridge and pull it straight up to remove it from the holder.
-
Unpack the New Cartridge
Unpack the new black cartridge from its packaging and remove any protective seals or tape.
-
Install the New Cartridge
Align the new black cartridge with the corresponding slot in the cartridge holder. Carefully insert the cartridge into the holder until it clicks into place.
-
Close the Cartridge Compartment
Once the new cartridge is installed, close the cartridge compartment flap or door securely.
After replacing the black cartridge, the printer will automatically align the print heads and be ready to print. Refer to the printer manual for any specific instructions or troubleshooting tips.
Inserting the Color Cartridge
1. Open the front cover of the printer and wait until the cartridge holder moves to the center of the printer.
>* If the cartridge holder does not move automatically, turn the printer off and on to reset it.
2. Press the tab on the empty color cartridge and lift it straight up to remove it from the holder.
>* **Note:** The color cartridge is the one on the right.
| Cartridge Color | Location |
|——————|————-|
| Black | Left |
| Color | Right |
3. Remove the new color cartridge from its packaging.
>* **Caution:** Do not touch the electrical contacts or ink nozzles on the cartridge.
4. Insert the new color cartridge into the holder, making sure it is facing the correct way.
>* A: Turn the color cartridge toward the printer and lift the tab on top of the cartridge.
>* B: Slide the front of the cartridge down all the way into the holder until it clicks into place.
>* C: Push down on the top of the cartridge until it snaps into place.
5. Close the front cover of the printer.
>* The printer will automatically align the cartridge if necessary.
Removing the Old Cartridges
1. Power on the printer and open the front cover
Press the power button to turn on the printer if it’s not already powered on. Once the printer is on, press the button located on the front of the printer, usually labeled ‘Open’ or ‘Cover.’ This action will open the front cover and expose the cartridge holder.
2. Locate the release lever and squeeze
Once the front cover is open, locate the release lever situated on the right side of the cartridge holder. It’s typically a small lever that needs to be squeezed to release the cartridges.
3. Remove the old cartridges
Once the release lever is squeezed, the cartridge holder will pop up. Carefully lift the cartridge holder out of the printer and place it on a stable, flat surface. Gently push down on the old cartridges to release them from their slots. Grab each cartridge by its sides and pull it straight up to remove it. Be cautious not to touch the ink nozzles or electrical contacts during this process.
| Cartridge Type | Color |
|---|---|
| PG-245 | Black |
| CL-246 | Color (cyan, magenta, yellow) |
Preparing the New Cartridges
Before installing the new cartridges, it’s important to make sure they are compatible with your Canon Pixma TS3522 printer. Check the printer’s user manual or the cartridge packaging to ensure compatibility.
Remove the new cartridges from their packaging. Handle them carefully to avoid damage.
Shake each cartridge gently for a few seconds to distribute the ink evenly throughout the cartridge.
Remove the protective caps from the bottom of each cartridge. These caps are designed to prevent the ink from drying out during storage.
Gently insert each cartridge into the corresponding color-coded slot inside the printer. Ensure that the cartridge is fully seated and clicks into place.
Close the ink cartridge cover and wait for the printer to initialize and recognize the new cartridges. This process may take a few minutes.
Once the printer has recognized the new cartridges, it will perform an alignment procedure to ensure accurate printing. Follow the on-screen instructions to complete the alignment process.
After the alignment process is complete, your printer is ready to print with the new cartridges.
| Cartridge Color | Cartridge Number |
|---|---|
| Black | PG-245 |
| Color | CL-246 |
Opening the Cartridge Cover
To reach the ink cartridges, you must first open the cartridge cover. Here’s a step-by-step guide:
- Turn on the printer. Ensure that the printer is plugged in and the power button is ON.
- Lift the scanner unit. Gently lift the scanner unit (the top part of the printer that contains the scanning glass) until it reaches its maximum height and stays open.
- Locate the cartridge cover. Inside the opened scanner unit, you will see the cartridge cover. It is a black plastic door with an image of an ink cartridge on it.
- Press the cartridge cover release button. On the left side of the cartridge cover, there is a small button. Press this button to release the cartridge cover.
- Open the cartridge cover. Once you press the release button, the cartridge cover will spring open, allowing you to access the ink cartridges.
Locating the Cartridge Slot
To change the ink cartridge, you’ll first need to locate the cartridge slot. Here’s how to do it:
1. Open the Front Cover
To open the front cover, gently press down on the small lever at the bottom of the printer. The cover will open and reveal the ink cartridge slot.
2. Locate the Cartridge Slot
Once the front cover is open, you’ll see a rectangular slot in the center of the printer. This is where the ink cartridges are inserted and removed.
3. Identify the Cartridge Holder
Inside the cartridge slot, you’ll see a small plastic holder for each ink cartridge. Each holder has a colored label that corresponds to the color of the cartridge it holds.
4. Check for Empty Cartridges
If you’re not sure which cartridge is empty, you can check the printer’s ink levels. On the printer’s control panel, press the “Home” button, then select “Setup” and “Maintenance.” Select “Ink Levels” to view the remaining ink levels for each cartridge.
5. Determine the Replacement Cartridge
Once you’ve identified the empty cartridge, you’ll need to determine which replacement cartridge you need. Refer to your printer’s manual or the table below to find the correct cartridge for your printer model.
| Printer Model | Black Cartridge | Color Cartridge |
|---|---|---|
| Canon Pixma TS3522 | CL-281BK | CL-281 Tri-Color |
6. Locate the New Cartridge
Retrieve the new ink cartridge from its packaging. Be careful not to touch the electrical contacts on the bottom of the cartridge. Handle the cartridge by its sides or top.
Aligning the Cartridge
Step 7: Cleaning the Nozzle
If the print quality is still unsatisfactory after the alignment process, you may need to clean the nozzle. Here’s how to do it:
- Access the printer’s maintenance menu. On the printer control panel, navigate to the “Setup” option and select “Maintenance”.
- Select the “Cleaning” option. The printer will start the cleaning process, which may take a few minutes to complete.
- Perform a nozzle check by printing a test page. If the print quality has improved, the cleaning was successful.
- If the print quality is still poor, repeat the cleaning process once or twice more.
- If the nozzle cleaning does not resolve the print quality issue, contact Canon support for assistance.
Tip: To maintain optimal print quality, it’s recommended to perform nozzle cleaning regularly, especially if the printer has not been used frequently.
Additional Information:
| Problem | Solution |
|---|---|
| Vertical lines or bands in prints | Perform nozzle cleaning. |
| Horizontal lines or bands in prints | Perform nozzle cleaning and align the cartridges. |
| Blurry or faint prints | Perform nozzle cleaning and replace low ink cartridges. |
Inserting the Cartridge
-
Lift the cover
Locate the cover on the front of the printer. It has a small handle on its upper edge. Lift the cover to open it.
-
Remove the old cartridge (if any)
If there is an old cartridge installed, press on the tab at the back of the cartridge holder to release it. Then, pull the cartridge straight out of the printer.
-
Unpack the new cartridge
Remove the new cartridge from its packaging. Be careful not to touch the copper contacts or the ink nozzles.
-
Remove the protective tape
Locate the protective tape on the bottom of the cartridge. Peel off the tape to expose the ink nozzles.
-
Insert the new cartridge
Align the cartridge with the color-coded slot in the printer. Insert the cartridge into the slot until it clicks into place.
-
Press down on the cartridge
Once the cartridge is inserted, press down on it until it snaps into place.
-
Close the cover
Close the printer cover by pressing down on it until it clicks shut.
-
Print an alignment page
Once the cartridge is inserted, the printer will automatically print an alignment page. This page helps ensure that the cartridges are properly aligned. Follow the instructions on the alignment page to complete the alignment process.
Closing the Cartridge Cover
To close the cartridge cover, please follow these easy steps:
- After placing both cartridges into their slots, gently close the cartridge cover.
- Press on both sides of the cover to snap it into place.
- Confirm that the cartridge cover is completely closed.
- The power light will turn on, and the printer will automatically start charging the ink.
- Once the ink charging process is complete, the power light will turn green.
- Your Canon Pixma TS3522 is now ready to print!
| Steps | Actions |
|---|---|
| 1 | Locate the cartridge cover. |
| 2 | Open the cartridge cover. |
| 3 | Remove the old cartridges. |
| 4 | Unpack the new cartridges. |
| 5 | Insert the new cartridges into their slots. |
| 6 | Close the cartridge cover. |
| 7 | Press on both sides of the cover to snap it into place. |
| 8 | Confirm that the cartridge cover is completely closed. |
| 9 |
|
Printing a Test Page
To ensure that the newly installed cartridges are functioning properly, it’s highly recommended to print a test page. This process allows you to evaluate the print quality and identify any potential issues with the cartridges or the printer itself. Here’s a step-by-step guide to printing a test page on your Canon Pixma TS3522:
-
Turn on the printer: Press the power button on the front of the printer to turn it on.
-
Load paper: Make sure there’s enough paper in the cassette and that it’s the correct size and type for your print job.
-
Access the printer settings: Locate the "Settings" or "Preferences" option on your computer and open it.
-
Select "Printing": Within the printer settings, navigate to the "Printing" or "Printer" section.
-
Choose "Maintenance": Look for a tab or option labeled "Maintenance" or "Printer Maintenance."
-
Select "Print Test Page": Under the "Maintenance" section, you’ll find the option to "Print Test Page" or "Test Printing."
-
Start the test print: Click on the "Print Test Page" button and the printer will automatically print a test page.
-
Examine the test page: Once the test page is printed, carefully examine it for any printing issues. Check for missing or faded colors, streaks, or smudges.
-
Evaluate the print quality: If the test page shows any abnormalities or inconsistencies, it indicates that there may be a problem with the cartridges or the printer.
-
Repeat the process if needed: If the test page is unsatisfactory, repeat the cartridge replacement and test printing process to ensure that the new cartridges are installed correctly and functioning as intended. Consult the user manual or contact Canon support if the issue persists.
How To Change Cartridge On Canon Pixma Ts3522
Replacing the ink cartridges in your Canon Pixma TS3522 printer is a simple process that can be completed in just a few minutes. Here are the steps on how to do it:
- Open the front cover of the printer.
- Locate the ink cartridges inside the printer. There will be two cartridges, one black and one color.
- Press down on the tab at the front of the ink cartridge that you want to replace.
- Lift the ink cartridge out of the printer.
- Unpack the new ink cartridge and remove the protective tape from the bottom of the cartridge.
- Insert the new ink cartridge into the printer. Make sure that the cartridge is aligned properly with the guides in the printer.
- Press down on the ink cartridge until it clicks into place.
- Close the front cover of the printer.
Your printer is now ready to print with the new ink cartridges.
People Also Ask About How To Change Cartridge On Canon Pixma TS3522
How often should I replace the ink cartridges in my Canon Pixma TS3522 printer?
The frequency with which you need to replace the ink cartridges in your Canon Pixma TS3522 printer will depend on how often you use the printer and the type of printing you do. However, as a general rule of thumb, you should replace the ink cartridges when the printer indicates that they are low on ink.
What type of ink cartridges do I need for my Canon Pixma TS3522 printer?
The Canon Pixma TS3522 printer uses two types of ink cartridges: a black ink cartridge (PG-245) and a color ink cartridge (CL-246).
Where can I buy ink cartridges for my Canon Pixma TS3522 printer?
You can purchase ink cartridges for your Canon Pixma TS3522 printer from a variety of retailers, including Canon’s website, Amazon, and Staples.
