If you’re like most people, you probably don’t think about the battery in your AirTag until it dies. But when it does, you’ll need to know how to change it. Replacing the battery in an AirTag is a simple process that can be done in just a few minutes. In this article, we’ll walk you through the steps on how to do it.
Prepare the necessary tools. Before you start, you’ll need a few things: a new CR2032 battery, a small Phillips head screwdriver, and a clean cloth. Make sure the AirTag is turned off before you begin. To do this, press and hold the button on the back of the AirTag until the white light turns off.
Locate the battery compartment. The battery compartment is located on the back of the AirTag. It’s a small, round compartment with a Phillips head screw in the center. Use the screwdriver to remove the screw, then gently lift the battery compartment cover off. Be careful not to lose the small O-ring that seals the compartment.
Testing the AirTag
Before proceeding with the battery replacement, it’s crucial to verify the status of your AirTag. To do so, follow these steps:
- Open the Find My app on your iPhone or iPad.
- Tap the “Items” tab.
- Select the AirTag you wish to test.
- Check the battery level indicator. If it displays a low battery icon, it’s likely time for a replacement.
- Alternatively, you can trigger a sound by tapping on “Play Sound” to ensure that your AirTag is functioning correctly.
Confirming the Battery Life
To obtain a more accurate battery reading, consider the following additional steps:
- Place your AirTag near your iPhone or iPad.
- Open the Find My app and select the AirTag.
- Tap on the “Battery” tab.
- You will now see a percentage indicator that provides a precise representation of the remaining battery life.
| Battery Level | Percentage |
|---|---|
| Low | < 10% |
| OK | 10% – 95% |
| High | > 95% |
Once you have confirmed that the battery needs to be replaced, proceed to the next section to learn the steps involved in the replacement process.
Resetting the AirTag
If you need to pair the AirTag with a different Apple ID, you’ll need to reset it. To do this, follow these steps:
- Remove the back cover of the AirTag by twisting it counterclockwise.
- Press down on the battery and hold it for 10 seconds until you hear two beeps.
- Release the battery and wait for 30 seconds.
- Press and hold the battery again for 10 seconds until you hear one beep.
- Release the battery.
- The AirTag is now reset and ready to be paired with a new Apple ID.
Here’s a table summarizing the steps to reset the AirTag:
Step Action 1 Remove the back cover of the AirTag by twisting it counterclockwise. 2 Press down on the battery and hold it for 10 seconds until you hear two beeps. 3 Release the battery and wait for 30 seconds. 4 Press and hold the battery again for 10 seconds until you hear one beep. 5 Release the battery. 6 The AirTag is now reset and ready to be paired with a new Apple ID. Troubleshooting Battery Issues
If you’re experiencing issues with your AirTag’s battery, try the following troubleshooting steps:
1. Check the Battery Level
Make sure the AirTag’s battery is low. Open the Find My app and select the AirTag. The battery level will be displayed under the AirTag’s name.
2. Replace the Battery
If the battery is low, replace it with a new CR2032 battery. To replace the battery, follow the steps below:
- Turn the AirTag upside down.
- Press down on the stainless steel cover and rotate it counterclockwise until it comes off.
- Remove the old battery and insert the new one with the positive side facing up.
- Replace the cover by rotating it clockwise until it clicks into place.
3. Clean the Battery Contacts
If the battery contacts are dirty, it can prevent the AirTag from getting power. Clean the contacts with a cotton swab dipped in rubbing alcohol.
4. Reset the AirTag
If the battery issues persist, reset the AirTag by following these steps:
- Remove the battery from the AirTag.
- Wait 5 seconds.
- Reinsert the battery.
- Press the setup button on the AirTag for 10 seconds.
- The AirTag will reset and start flashing white.
5. Contact Apple Support
If you’ve tried all the troubleshooting steps above and are still having issues with your AirTag’s battery, contact Apple support for further assistance.
Additional Troubleshooting Tips
Here are some additional troubleshooting tips that may help resolve battery issues with your AirTag:
Issue Solution AirTag is not turning on Make sure the battery is correctly inserted and that the contacts are clean. AirTag’s battery is draining quickly The AirTag’s battery may be draining quickly if it is frequently being used or if it is exposed to extreme temperatures. AirTag is not connecting to the Find My app Make sure that the AirTag is within Bluetooth range of your iPhone or iPad and that both devices are connected to the same Wi-Fi network. How To Change The Battery In An Airtag
To change the battery in an AirTag, follow these steps:
- Press down on the white circular cover of the AirTag and turn it counterclockwise.
- Remove the cover by pulling it straight up.
- Remove the old battery by gently prying it out with a fingernail or thin tool.
- Insert the new battery into the AirTag, positive side up.
- Replace the circular cover by aligning it with the slot and pressing it down until it clicks into place.
People Also Ask About How To Change The Battery In An Airtag
How Often Should I Change The Battery In My AirTag?
The battery in an AirTag should last for approximately one year with normal use. However, the battery life may vary depending on the frequency of use and the signal strength of the area where the AirTag is used.
What Type Of Battery Does An AirTag Use?
An AirTag uses a CR2032 coin cell battery.
Where Can I Find Replacement Batteries For My AirTag?
Replacement batteries for AirTags can be purchased at most electronics stores and online.
