Breathe new life into your upholstery and rugs with the exceptional cleaning power of the Bissell Little Green carpet cleaner. This compact and versatile machine packs a punch when it comes to eliminating stains and dirt, making it an indispensable tool for any household. However, to maintain its peak performance and ensure a thorough clean every time, proper maintenance is essential. Embark on a step-by-step journey to meticulously clean your Bissell Little Green, restoring its pristine condition and extending its lifespan.
The first step in this transformative process involves tackling the exterior of your trusty cleaning companion. Begin by unplugging the machine and allowing it to cool completely. Use a damp cloth to gently wipe down the exterior surfaces, removing any visible dirt or debris. Pay special attention to the crevices and buttons, where grime tends to accumulate. For stubborn stains, employ a mild cleaning solution and a soft brush to gently scrub away the offending marks. Once the exterior gleams with renewed cleanliness, proceed to address the internal components.
Next, turn your attention to the inner workings of the Bissell Little Green. Detach the water tank and thoroughly rinse it with clean water to remove any residual cleaning solution. Allow the tank to dry completely before reattaching it to the machine. The filter, located inside the water tank, also requires regular cleaning. Rinse the filter under running water until the water runs clear, then gently squeeze out any excess moisture. Replace the washed filter back into its designated spot within the water tank. With the internal components refreshed, your Bissell Little Green is now ready to tackle any cleaning challenge that comes its way.
Preparing the Machine
Before you start cleaning, it’s important to prepare your Bissell Little Green machine. Here’s a step-by-step guide:
- Remove strainer.
- Remove hair and debris.
- Rinse thoroughly.
- Remove filter.
- Rinse thoroughly.
- Replace in dirty water tank.
- Disconnect the Tank: Turn off the machine and unplug it from the power source. Detach the clean water tank from the main unit.
- Empty the Tank: Pour out any remaining clean water from the tank.
- Rinse the Tank: Fill the tank halfway with clean, warm water. Shake the tank vigorously to loosen any debris or residue. Empty the water.
- Cleaning Solution: Fill the tank with a solution of 1 part white vinegar to 4 parts clean water. Let the solution sit in the tank for 15-20 minutes.
- Scrub the Tank: Use a soft-bristled brush or a sponge to gently scrub the inside of the tank. Pay attention to any areas where dirt or grime has accumulated.
- Rinse Thoroughly: Empty the cleaning solution. Rinse the tank thoroughly with warm water until there’s no more vinegar smell or residue.
- Dry the Tank: Use a clean towel or paper towels to dry the inside of the tank. Make sure the tank is completely dry before reattaching it to the machine.
- Unplug the Bissell Little Green from the power outlet.
- Flip the vacuum over and remove the bottom cover.
- Locate the belt and use a pair of scissors to carefully cut away any pet hair that is wrapped around it.
- Use a soft cloth to wipe away any remaining pet hair from the belt and the pulleys.
- Reattach the bottom cover and plug the Bissell Little Green back into the power outlet.
- Test the vacuum to make sure that it is working properly.
- Regularly check the belt for pet hair and remove it as needed to keep your Bissell Little Green running at its best.
- Unplug the Bissell Little Green from the electrical outlet.
- Remove the dirty water tank and empty it into a toilet or sink.
- Fill the clean water tank with hot water and add the recommended amount of Bissell carpet cleaning solution.
- Replace the clean water tank on the Bissell Little Green.
- Attach a cleaning tool to the hose.
- Turn on the Bissell Little Green and select the desired cleaning mode.
- Begin cleaning the carpet.
- When you are finished cleaning, turn off the Bissell Little Green and unplug it from the electrical outlet.
- Empty the dirty water tank and rinse it out with clean water.
- Store the Bissell Little Green in a cool, dry place.
1. Gather your supplies
You’ll need the following supplies:
| Item | Quantity |
|---|---|
| Bissell Little Green machine | 1 |
| Cleaning solution | 1 bottle |
| Clean water | 1 gallon |
| Empty bucket | 1 |
| Upholstery attachment (optional) | 1 |
2. Set up the machine
Attach the upholstery attachment to the machine if you’re cleaning upholstery. Fill the clean water tank with warm water to the fill line. Add the cleaning solution to the machine according to the manufacturer’s instructions.
3. Test the machine
Before you start cleaning, test the machine in an inconspicuous area to make sure it’s working properly.
Removing Visible Debris and Hair
1. Empty the Dirty Water Tank
* Disconnect the dirty water tank from the machine.
* Remove the cap and pour the contents down the drain or toilet.
* Rinse the tank thoroughly with clean water.
2. Clean the Hair Strainer and Filter
* Locate the hair strainer at the bottom of the dirty water tank.
* Pull the strainer out and remove any hair or debris.
* Rinse the strainer thoroughly with clean water.
* Check the filter in the dirty water tank. If it is dirty, remove it and rinse it with water.
Note: To prevent clogs and ensure optimal performance, clean the hair strainer and filter after each use. The table below summarizes the cleaning steps:
| Component | Cleaning Steps |
|---|---|
| Hair Strainer |
|
| Filter |
|
Cleaning the Dirty Water Tank
To ensure optimal performance and prevent unpleasant odors, it’s essential to regularly clean the dirty water tank of your Bissell Little Green machine. Here’s a detailed guide to help you through the process:
Emptying the Tank
Begin by unplugging the machine and detaching the dirty water tank from the base. Hold it upright over a sink or toilet and empty the contents carefully. Rinse the tank thoroughly with clean water to remove any remaining dirt or debris.
Dismantling and Cleaning the Components
To thoroughly clean the dirty water tank, it’s helpful to disassemble it into its individual components. This typically involves removing the float switch and any other detachable parts. Once disassembled, soak these components in a solution of warm water and a mild dishwashing detergent for approximately 15 minutes.
Table: Cleaning the Dirty Water Tank Components
| Component | Cleaning Method |
|---|---|
| Float Switch | Use a soft brush or cotton swab to gently remove any dirt or debris from the float and switch mechanism. |
| Lid | Remove any dirt or debris from the lid and the gasket around its rim. If necessary, use a moist cloth to wipe down the lid. |
| Filter | Rinse the filter thoroughly with clean water. If it’s heavily soiled, soak it in a solution of one part distilled white vinegar to four parts water for 15 minutes, then rinse again. |
Reassembling and Refilling
Once the components have been thoroughly cleaned, reassemble the dirty water tank in the reverse order of disassembly. Ensure that all parts are securely in place. Fill the tank with clean water to the indicated fill line and reattach it to the base of the Bissell Little Green machine.
Cleaning the Clean Water Tank
To keep the Bissell Little Green running smoothly, it’s crucial to clean the clean water tank regularly. Here’s a detailed step-by-step guide:
Here’s a table summarizing the cleaning frequencies for various components of the Bissell Little Green:
| Component | Cleaning Frequency |
|---|---|
| Clean Water Tank | After each use |
| Dirty Water Tank | After each use |
| Nozzle and Suction Hose | After each use |
| Filters | Monthly or as needed |
Flushing the System
Flushing the Bissell Little Green cleaner’s system is crucial to maintain its performance and prevent clogs. Here’s a detailed guide on how to do it:
1. Empty the Clean Water Tank
Remove the clean water tank from the machine and empty it completely.
2. Fill the Clean Water Tank with Hot Water
Fill the clean water tank with hot water, but do not exceed the “Fill” line.
3. Attach the Spray Tool
Connect the spray tool to the extension cord and insert it into the solution tank.
4. Turn on the Machine and Start Flushing
Turn on the Little Green cleaner and squeeze the trigger on the spray tool to start flushing. The water will flow through the system, removing any dirt or debris.
5. Flush Multiple Times
Continue flushing the system for several minutes, emptying the recovery tank and refilling the clean water tank with hot water as needed. Here are some tips for effective flushing:
| Tip | Explanation |
|---|---|
| Use Hot Water | Hot water helps dissolve dirt and grime more effectively. |
| Flush Thoroughly | Flush the system for at least 5-7 minutes to ensure all debris is removed. |
| Check Recovery Tank | If the water in the recovery tank appears clean, you can stop flushing. |
Cleaning the Brushes
Regularly cleaning the brushes on your Bissell Little Green is essential for maintaining its optimal performance. Follow these steps to ensure thorough cleaning of the brushes:
1. Remove the Brush Roller
Locate the release lever on the bottom of the machine and lift it to detach the brush roller.
2. Rinse the Brush Roller
Hold the brush roller under lukewarm running water and turn it slowly to remove any debris or hair.
3. Remove Obstructions
Inspect the brush roller for any tangled hair or debris that may have become stuck. Use a pair of scissors or tweezers to carefully remove these obstructions.
4. Clean the Brush Bristles
Use a soft brush or toothbrush to gently brush away any remaining debris from the brush bristles.
5. Clean the Brush Housing
With the brush roller removed, use a damp cloth to wipe down the brush housing. Ensure you reach into all crevices to remove any dirt or debris.
6. Inspect the Drive Belt
While you have the brush roller removed, take a moment to inspect the drive belt. Look for any signs of wear or damage. If necessary, replace the belt according to the manufacturer’s instructions.
| Frequency | Task |
|---|---|
| Monthly | Clean the brush roller and brush housing |
| As needed | Inspect and clean the drive belt |
Removing Pet Hair from the Belt
If your Bissell Little Green has been working hard to clean up after your furry friends, it’s likely that pet hair has accumulated on the belt. This hair can cause the belt to slip, which can in turn reduce the suction power of the vacuum. To keep your Bissell Little Green running at its best, it’s important to regularly remove pet hair from the belt.
Here are the steps on how to remove pet hair from the belt:
Here are some additional tips for removing pet hair from the belt:
| Tip | Description |
|---|---|
| Use a vacuum cleaner attachment | If you have a vacuum cleaner with a brush attachment, you can use it to gently remove pet hair from the belt. |
| Use a lint roller | A lint roller can also be effective at removing pet hair from the belt. |
| Use a pair of tweezers | If the pet hair is tightly wrapped around the belt, you can use a pair of tweezers to carefully remove it. |
Inspecting for Leaks and Damage
Before cleaning the Bissell Little Green, it’s crucial to check for any potential leaks or damage that could affect its performance or safety.
1. Check the Hoses and Connections
Thoroughly inspect the hoses and connections for any cracks, tears, or loose fittings. If any damage is found, replace the affected parts to prevent leaks or potential hazards.
2. Examine the Tank
Remove the water tank and clean water bucket. Carefully check for any leaks, cracks, or damage. Replace any damaged parts to ensure the machine operates properly.
3. Inspect the Nozzle
Disconnect the cleaning nozzle and examine it for any clogs, debris, or damage. Clean or replace the nozzle as needed to ensure optimal cleaning performance.
4. Look for Electrical Damage
Visually inspect the power cord and plug for any frayed wires, cuts, or exposed terminals. If any electrical damage is found, discontinue use immediately and seek professional repair.
5. Check the Sprayer
Test the sprayer by pressing the trigger. If the water stream is weak or uneven, it may indicate a clog or damage to the sprayer. Clean or replace the sprayer accordingly.
6. Examine the Brushes
Inspect the rotating brushes for any signs of wear, damage, or tangles. Clean or replace the brushes as needed to maintain effective cleaning.
7. Check the Wheels and Rollers
Examine the wheels and rollers for any debris, damage, or excessive wear. Clean or replace them if necessary to ensure smooth operation and maneuverability.
8. Inspect the Machine’s Housing
Check the exterior of the machine for any cracks, dents, or damage. Pay attention to the areas around the handle, base, and buttons. If any damage is found, contact Bissell for repair or replacement.
Thoroughly inspecting for leaks and damage before using the Bissell Little Green ensures its safe and effective operation, preventing potential hazards or cleaning interruptions.
Reassembling the Machine
Once you’ve cleaned all of the components, it’s time to reassemble the machine. Here’s a step-by-step guide:
1. Attach the water tank to the back of the washer. Align the tank with the grooves on the machine and slide it into place until it clicks.
2. Insert the cleaning solution into the tank. Fill the tank with warm water and add the recommended amount of BISSELL cleaning solution.
3. Replace the dirty water tank. Slide the dirty water tank back into the slot on the side of the machine. Make sure it’s securely in place.
4. Attach the vacuum hose. Insert the vacuum hose into the hose port on the top of the machine. Secure the hose by turning the collar clockwise.
5. Attach the cleaning head. Slide the cleaning head onto the front of the machine. Make sure it’s aligned with the grooves and clicks into place.
6. Attach the handle. Insert the handle into the handle port on the top of the machine.
7. Plug in the power cord. Insert the power cord into the outlet and turn it on.
8. test the machine.
Before using the machine on your carpets, test it on a small area to make sure it’s working properly.
9. To test the machine, follow these steps:
Fill the water tank with clean water.
Place a small amount of cleaning solution into the tank.
Turn on the machine and let it run for a few seconds.
Check to see if the machine is picking up water and spraying it out of the cleaning head.
If the machine is not working properly, refer to the troubleshooting guide for help.
Storage and Maintenance
Empty the Dirty Tank
After each use, empty the dirty water tank to prevent bacteria growth and unpleasant odors.
Clean the Dirty Tank
Rinse the dirty water tank thoroughly with clean water to remove any remaining dirt or debris.
Fill the Clean Tank
Fill the clean water tank with hot tap water and add the recommended amount of cleaning solution.
Clean the Brush Roll
Remove the brush roll and clean any hair, debris, or pet fur wrapped around it. Use scissors to cut away stubborn tangles.
Clean the Nozzle
Inspect the nozzle for any blockages or build-up. Use a damp cloth or a toothpick to gently remove any debris.
Check the Filter
Inspect the filter for any tears or damage. Replace the filter regularly according to the manufacturer’s instructions.
Dry the Machine
Open the machine and allow it to air dry completely before storing it to prevent mold or mildew growth.
Maintain the Belt
Examine the belt for any signs of wear or damage. Replace the belt as needed to ensure optimal performance.
Lubricate the Machine
Apply a few drops of lubricant to the moving parts of the machine to reduce friction and extend its lifespan.
Storage
Store the Bissell Little Green in a dry, cool place away from direct sunlight or extreme temperatures.
How To Clean Bissell Little Green
The Bissell Little Green is a portable carpet cleaner that is easy to use and maintain. To clean the Bissell Little Green, follow these steps:
People Also Ask About How To Clean Bissell Little Green
What is the best way to clean a Bissell Little Green?
The best way to clean a Bissell Little Green is to follow the steps outlined in the user manual. These steps will help you to clean the machine thoroughly and extend its lifespan.
How often should I clean my Bissell Little Green?
You should clean your Bissell Little Green after every use. This will help to prevent the build-up of dirt and debris, which can clog the machine and reduce its performance.
What type of cleaning solution should I use in my Bissell Little Green?
You should use a carpet cleaning solution that is specifically designed for use in a Bissell Little Green. These solutions are formulated to clean carpets effectively without damaging the machine.
