It is essential to be able to open and close Tommy Bahama’s beach chair properly. After a long and relaxing day at the beach, the last thing you want to deal with is a chair that won’t close. By following a few simple steps, you can quickly and easily close your Tommy Bahama beach chair so that you can get on with your day.
First, you need to make sure that the chair is completely dry. If the chair is wet, it will be difficult to close and you may end up damaging it. To dry the chair, simply open it up and let it sit in the sun for a few hours. Once the chair is dry, you can begin to close it.
To close the chair, first fold the legs up towards the seat. Next, fold the seat in half. The seat should fold up so that the top of the seat is facing down. Finally, fold the backrest of the chair down so that it is flat against the seat. The chair is now closed and can be stored or transported.
Dismantle the Armrests
Removing the armrests from your Tommy Bahama beach chair is essential for compact storage or transportation.
To start, identify the connection points located at the base of each armrest where they attach to the main frame.
Depending on your chair model, these points may feature snap-fit buttons, screws, or bolts.
If you have snap-fit buttons, simply press them together while simultaneously pulling the armrests away from the frame.
On the other hand, if your chair utilizes screws or bolts, use a screwdriver or wrench to loosen and remove them.
Once the fasteners are detached, the armrests will easily slide off the main frame.
Here’s a step-by-step guide to help you disassemble the armrests:
| Step 1 | Identify the connection points at the base of each armrest. |
|---|---|
| Step 2 | Determine the type of fasteners used (snap-fit buttons, screws, or bolts). |
| Step 3 | If the fasteners are snap-fit buttons, press them together while pulling the armrests away from the frame. |
| Step 4 | If the fasteners are screws or bolts, use a screwdriver or wrench to loosen and remove them. |
| Step 5 | Once the fasteners are detached, the armrests will slide off the main frame. |
Remember to follow these steps carefully to ensure the safe and proper disassembly of the armrests on your Tommy Bahama beach chair.
Fold the Chair in Half
To fold the chair in half, first, move the armrests down and snap them into the locked position. Find the two release levers on the back of the chair and squeeze them together. While squeezing the levers, fold the back of the chair down over the seat. The chair should now be folded in half. To secure, wrap the straps around the folded chair and snap them together.
The following steps provide more detailed instructions on how to fold the Tommy Bahama beach chair in half:
1. Lower and Lock the Armrests
Locate the armrests on either side of the chair. Lift the armrests up until they are parallel to the ground. Then, push them down until they snap into the locked position.
2. Squeeze the Release Levers and Fold the Back
Find the two release levers on the back of the chair, one on each side. Squeeze the levers together while simultaneously folding the back of the chair down over the seat. The chair should now be folded in half.
3. Secure with Straps
Wrap the straps around the folded chair and snap them together to secure the chair in the folded position.
Remove the Rear Crossbar
The rear crossbar is what keeps the chair back upright. To remove it, first, locate the two plastic knobs on the back of the chair, one on each side. Grip the knobs and squeeze them together while pulling the crossbar straight up. The crossbar should come off easily.
If the crossbar is stuck, you can use a flat-head screwdriver to pry it loose. Insert the screwdriver into the slot between the crossbar and the chair back, and gently pry the crossbar up. Once the crossbar is loose, you can pull it off the chair.
Once the rear crossbar is removed, you will be able to fold the chair flat for storage or transport.
Troubleshooting
| Problem | Solution |
|---|---|
| The rear crossbar is stuck. | Use a flat-head screwdriver to pry it loose. |
| The rear crossbar won’t come off. | Make sure you are squeezing the plastic knobs together while pulling the crossbar straight up. |
| The rear crossbar is broken. | Contact Tommy Bahama customer service for a replacement part. |
Collapse the Seat
To collapse the seat, begin by removing the seat cushion by unvelcroing the straps around the bottom. Unclip the hinges attaching the seat frame to the back. Lift the seat up and over the back of the chair. Finally, release the hinged legs from the underside of the seat, and the seat will fall into place.
Unfold the Back
Once the seat has been collapsed, push the front legs of the chair together. Squeeze together the metal brackets on the back of the chair just below the seat. Pull the top of the back of the seat up and toward the seat until it clicks into place.
Folding the Chair
Lay the chair flat on its back. Step on the middle of the seat to secure it in place. Fold the legs of the chair up and into the chair. Next, fold the seat down over the legs and back of the chair. Finally, secure the chair shut with the strap.
Carrying the Chair
To carry the chair, simply pick it up by the strap. The chair can be carried over your shoulder or by your side.
Storing the Chair
The chair can be stored in a garage, closet, or other storage space. The chair should be kept dry and out of direct sunlight.
Disconnect the Side Bars
To begin the folding process, it is essential to disconnect the side bars that hold the chair in an open position. Locate the push-button release mechanisms on both sides of the chair, near the seat. Press and hold these buttons simultaneously.
As you hold the buttons, gently pull the side bars inward towards the center of the chair. The bars should slide smoothly into the designated slots, designed to accommodate them in the closed position.
Once the side bars are fully engaged in the slots, release the push-button mechanisms. The side bars should remain securely locked in place, ensuring the chair’s stability when closed.
Detach the Fabric
To detach the fabric from the frame, locate the Velcro or snaps that connect the two. Carefully peel apart the Velcro or unclip the snaps. Once all the fasteners are detached, the fabric can be removed from the frame.
Tips for Detaching the Fabric
- Be gentle when detaching the fabric to avoid tearing it.
- If the fasteners are stuck, use a butter knife or plastic spudger to gently pry them apart.
- If the fabric is particularly difficult to remove, try soaking it in warm water for a few minutes to loosen the Velcro or snaps.
Additional Notes on Detaching the Fabric
| Fabric Type | Fastener Type | Detachment Tips |
|---|---|---|
| Canvas | Velcro | Peel apart gently. Use a butter knife or plastic spudger if necessary. |
| Nylon | Snaps | Unclip the snaps. If the snaps are stuck, use a pair of needle-nose pliers. |
| Polyester | Velcro and Snaps | Detach the Velcro and unclip the snaps. Soak the fabric in warm water if necessary. |
Remove the Hinge Bolts
Once you have removed the locking pin, it’s time to tackle the hinge bolts. Grab the bolts and carefully unscrew them using a screwdriver or wrench. As you loosen the bolts, the two frame sections will begin to separate. Be cautious not to over-loosen the bolts, as they can easily fall out and become lost. To prevent this, hold the bolt with one hand while turning the screwdriver with the other.
There are eight hinge bolts that hold the two frame sections together. The location of the bolts may vary slightly depending on the model of your Tommy Bahama beach chair, but they are typically located at the following points:
| Location | Number of Bolts |
|---|---|
| Top of the Backrest | 2 |
| Bottom of the Backrest | 2 |
| Top of the Seat | 2 |
| Bottom of the Seat | 2 |
Once all eight hinge bolts are removed, the two frame sections will be completely detached. You can now proceed to fold the chair for storage or transport.
Clean and Lubricate the Chair
After every use, it’s essential to clean and lubricate your Tommy Bahama beach chair to maintain its optimal performance and lifespan. Here’s a step-by-step guide:
Tools You’ll Need:
| Item | Purpose |
|---|---|
| Mild soap | Cleaning the fabric |
| Sponge | Applying soap and water |
| Soft cloth | Wiping dry |
| WD-40 or silicone spray | Lubricating moving parts |
Instructions:
- Rinse with water: Use a hose to remove any sand or dirt from the fabric and frame.
- Create a cleaning solution: Mix a few drops of mild soap in a bucket of warm water.
- Apply cleaning solution: Use a sponge to apply the cleaning solution to the fabric, gently scrubbing any stains or dirt.
- Rinse thoroughly: Use a hose to rinse the fabric thoroughly, removing all soap residue.
- Wipe dry: Use a soft cloth to gently pat the fabric dry.
- Lubricate moving parts: Spray WD-40 or silicone spray onto all moving parts of the chair, such as hinges, fasteners, and wheels.
- Wipe away excess lubricant: Use a soft cloth to wipe away any excess lubricant that may attract dirt or sand.
- Let dry completely: Allow the chair to dry completely before storing it or using it again.
Reassemble the Chair
9. Extend the Seat and Backrest:
-
Seat:
- Grasp the front edge of the seat frame.
- Pull the seat forward until it reaches its furthest point.
- Verify that the seat is properly extended by checking that the fabric is taut and secure.
-
Backrest:
- Locate the two knobs on the bottom corners of the backrest frame.
- Rotate the knobs outward to release the backrest.
- Gently pull the backrest up and back until it reaches the desired angle.
- Tighten the knobs to secure the backrest in place.
Adjust the Tension
Once you’ve set up your chair, you may need to adjust the tension of the fabric to ensure maximum comfort. Here’s how to do it:
- Locate the tension knobs: They are usually located on the sides of the chair’s back frame.
- Loosen the knobs: Turn them counterclockwise to loosen the fabric tension.
- Tighten the knobs: Turn them clockwise to increase the tension.
- Check the tension: Sit in the chair and adjust the tension until you find the desired firmness or support.
- Retighten the knobs: Once you have the desired tension, retighten the knobs to secure the fabric.
Tips for Adjusting Tension:
| Adjustment | Result |
|---|---|
| Increased tension | Increased support and firmness |
| Decreased tension | Softer and more relaxed feel |
| Uneven tension | Can cause discomfort or improper support |
Remember to adjust the tension regularly, especially after prolonged use, to maintain the chair’s comfort and support.
How To Close Tommy Bahama Beach Chair
To close your Tommy Bahama beach chair, follow these steps:
- Fold the legs of the chair together.
- Lift the seat of the chair and fold it down over the legs.
- Secure the seat of the chair with the velcro strap.
Your Tommy Bahama beach chair is now closed and ready to be stored or transported.
People Also Ask About How To Close Tommy Bahama Beach Chair
How do you fold a Tommy Bahama backpack beach chair?
To fold a Tommy Bahama backpack beach chair, follow these steps:
- Unzip the backpack and remove the chair.
- Fold the legs of the chair together.
- Fold the seat of the chair down over the legs.
- Secure the seat of the chair with the velcro strap.
- Place the chair back in the backpack and zip it up.
How do you close a Tommy Bahama zero gravity chair?
To close a Tommy Bahama zero gravity chair, follow these steps:
- Lift the seat of the chair and fold it down over the legs.
- Secure the seat of the chair with the velcro strap.
