In the realm of vaping, the NOVVO 2X Pod system stands as a testament to innovation and convenience. Its revolutionary design and user-friendly interface have made it a favorite among vapers of all experience levels. However, one key aspect of using the NOVVO 2X Pod is mastering the art of filling it correctly. Whether you’re a seasoned vaper or just starting your vaping journey, this comprehensive guide will provide you with the essential steps and tips to ensure a seamless and enjoyable vaping experience with your NOVVO 2X Pod.
Before embarking on the filling process, it is crucial to gather the necessary materials. You will need a NOVVO 2X Pod, your preferred e-liquid, and a clean cloth or paper towel. With these items at your disposal, you can proceed with filling your NOVVO 2X Pod. To begin, gently remove the mouthpiece from the pod by pulling it upwards. Once the mouthpiece is detached, you will see a small hole at the bottom of the pod. This is where you will insert the e-liquid. Using the dropper provided with your e-liquid bottle, carefully fill the pod until it reaches the indicated fill line. Avoid overfilling the pod, as this can lead to leaking and other issues.
After filling the pod, carefully reattach the mouthpiece by pressing it firmly into place. Ensure that it is securely connected to prevent any e-liquid leakage. Once the mouthpiece is attached, wipe away any excess e-liquid that may have spilled onto the pod or your hands. Finally, insert the filled pod into your NOVVO 2X device and enjoy your vaping experience. Remember to prime the coil by taking a few short puffs without inhaling before vaping regularly. This step helps to saturate the coil adequately and prevents dry hits.
Inserting the Pod into the Device
Installing the pod into your Novvo 2x device is a quick and easy process. Follow these detailed steps to ensure a proper fit:
-
Locate the Pod Bay: Turn your Novvo 2x upside down and open the magnetically secured pod bay situated on the bottom of the device.
-
Orient the Pod Correctly: Take a fresh pod and ensure its notch is aligned with the corresponding notch inside the pod bay. The pod should fit snugly into place.
- Table of Pod Orientations:
Pod Type Notch Alignment Single-use Pod Notch facing the front of the device Refillable Pod Notch facing the back of the device -
Secure the Pod Bay: Once the pod is inserted, close the pod bay magnetically. Verify that the pod is firmly secured by gently pressing on it. A subtle "click" should indicate a proper fit.
-
Prime the Device: Take a few gentle puffs on the mouthpiece to activate the pod. This will allow the e-liquid to saturate the coil, ensuring optimal vapor production and flavor delivery.
Filling the Chamber
The Novvo 2x Pod is a revolutionary new pod system that makes filling your favorite e-liquid a breeze. With its innovative design, the Novvo 2x Pod features a top-fill system that eliminates the need for messy and time-consuming bottom-filling.
To fill the Novvo 2x Pod, simply follow these easy steps:
1. Remove the Pod
To remove the pod, gently pull it straight up from the device.
2. Locate the Fill Port
The fill port is located on the top of the pod. It is covered by a small rubber stopper.
3. Fill the Chamber
Use the included e-liquid bottle to fill the chamber. The chamber holds up to 2ml of e-liquid.
**Tips for Filling the Chamber:**
- Use a needle-tip bottle or syringe to fill the chamber. This will help to prevent spilling.
- Fill the chamber slowly to avoid overflowing.
- Leave a small air bubble at the top of the chamber.
| Step No. | Description |
|---|---|
| 1 | Locate the Fill Port |
| 2 | Remove the rubber stopper |
| 3 | Fill the chamber to the top |
| 4 | Replace the rubber stopper |
Measuring the Correct Dosage
To fill your Novvo 2x pod with the correct dosage of medication, follow these steps:
1. Gather Your Materials:
You will need your Novvo 2x pod, medication vial, and diluent (if required).
2. Prepare the Medication:
If your medication requires dilution, mix it according to the manufacturer’s instructions. Draw the diluted medication into a 1mL syringe.
3. Remove the Pod Cap:
Remove the cap from the Novvo 2x pod by gently pulling it straight up.
4. Fill the Pod:
Hold the pod upright and insert the syringe needle into the fill port on top. Slowly depress the syringe plunger to fill the pod. Ensure that there are no air bubbles present within the pod. If an air bubble appears, gently tap the pod to dislodge the bubble and continue filling. Once the desired dosage is reached, slowly withdraw the syringe needle.
5. Replace the Pod Cap:
Place the cap securely back on top of the pod by pressing it down until it clicks into place.
Avoiding Overfilling
Overfilling your NOVVO 2X pod can lead to leaking and other issues. To avoid overfilling, follow these tips:
1. Fill the Pod Slowly
Take your time when filling the pod. This will help you avoid spilling e-liquid over the sides.
2. Use the Fill Line
The NOVVO 2X pod has a fill line marked on the side. Use this line to guide you when filling the pod. Stop filling once the e-liquid reaches the fill line.
3. Check for Air Bubbles
Once you’ve filled the pod, tap it gently to release any air bubbles. Air bubbles can cause the pod to leak.
4. Wipe Away Excess E-Liquid
If you spill any e-liquid on the pod or device, wipe it away with a clean cloth. This will help prevent leaking.
5. Filling Chart
Below is a chart that provides additional details on the filling process for the NOVVO 2X pod:
Closing the Lid
Once the pod is filled, close the lid by lining up the arrows on the pod and the device and pressing the lid down until it clicks into place. Make sure the lid is securely fastened to prevent any leaking or damage to the device.
Here are some additional tips for closing the lid:
1. Check the alignment: Before closing the lid, ensure that the fill port is facing the correct way. If it’s not aligned properly, it can cause leaks or damage to the device.
2. Press firmly: When closing the lid, apply firm and even pressure to ensure a secure fit. A loose lid can cause the pod to leak or malfunction.
3. Avoid overtightening: While it’s important to close the lid securely, avoid overtightening. Doing so can damage the pod or the device.
4. Check for leaks: After closing the lid, check the pod and device for any signs of leaking. If there are any leaks, clean the area thoroughly and try closing the lid again.
5. Seal the pod properly: If the lid is not closed properly, it can allow air to enter the pod and oxidize the e-liquid. This can affect the flavor and quality of the vape.
6. Clean the lid: If the lid becomes dirty or sticky, clean it with a cotton swab dipped in rubbing alcohol. This will help prevent any contamination.
7. Troubleshooting: If you’re having trouble closing the lid, check the following:
| Issue | Solution |
|---|---|
| Lid not aligning | Check the alignment of the pod and device. |
| Lid not closing securely | Press the lid more firmly. |
| Lid overtightened | Loosen the lid and try closing it again. |
| Pod leaking | Check for alignment, clean the area, and try closing the lid again. |
| Pod not vaping properly | Ensure the lid is closed properly and check for leaks. |
How to Fill Novvo 2x Pod
Filling the Novvo 2x pod is a simple process that can be completed in a few easy steps:
- Remove the pod from the device.
- Locate the fill port on the side of the pod.
- Insert the tip of your e-liquid bottle into the fill port.
- Squeeze a small amount of e-liquid into the pod.
- Repeat steps 3 and 4 until the pod is full.
- Reinsert the pod into the device.
Tips:
- Do not overfill the pod, as this can cause e-liquid to leak.
- Be careful not to get any e-liquid in the air hole.
- If you are new to vaping, it is recommended to start with a low nicotine strength e-liquid.
People Also Ask
How often should I refill my Novvo 2x pod?
The frequency with which you need to refill your Novvo 2x pod will depend on how often you vape. However, as a general rule of thumb, you should refill your pod when the e-liquid level is low.
What type of e-liquid can I use with my Novvo 2x pod?
You can use any type of e-liquid with your Novvo 2x pod. However, it is important to note that some e-liquids may be too thick for the pod to vaporize properly. If you are unsure whether or not an e-liquid is compatible with your Novvo 2x pod, it is always best to consult with the manufacturer.
How do I clean my Novvo 2x pod?
To clean your Novvo 2x pod, simply remove it from the device and wipe it down with a clean, dry cloth. You can also use a cotton swab to clean the inside of the pod.
