Maintaining the pristine condition of your Breville Barista Pro is crucial for consistently brewing exceptional espresso. Regular flushing is an essential part of this maintenance routine, ensuring that your machine remains free from residual coffee oils and particles. By diligently performing this simple yet effective procedure, you’ll not only enhance the flavor and quality of your espresso but also prolong the lifespan of your beloved coffee companion.
Flushing the Breville Barista Pro is a straightforward process that can be effortlessly incorporated into your daily coffee-making ritual. Moreover, it serves as a proactive measure against the buildup of scale and mineral deposits, which can potentially impair the performance of your machine over time. Imagine the satisfaction of savoring a freshly brewed espresso brimming with rich, velvety crema, knowing that your machine is meticulously cared for and ready to deliver an unforgettable coffee experience every time.
To embark on the flushing process, simply activate the hot water function on your Breville Barista Pro. Allow a substantial amount of water to flow through the group head, approximately 10 seconds, to effectively remove any lingering coffee residue. Additionally, engage the steam wand to release a burst of steam, further purging the system of any remaining particles. By adhering to this simple yet effective routine, you’ll not only ensure the optimal performance of your Breville Barista Pro but also contribute to its longevity, ensuring countless mornings filled with the invigorating aroma and delectable taste of freshly brewed espresso.
Prepping the Machine
Before flushing your Breville Barista Pro, it’s crucial to prepare the machine properly. Here’s a step-by-step guide to ensure a successful flush:
Emptying the Water Tank
Remove the water tank from the machine and discard any remaining water. It’s recommended to rinse the tank thoroughly to remove any mineral buildup or residual coffee grounds. Reinsert the empty water tank into the machine.
Installing the Blind Filter Basket
Locate the blind filter basket that came with your Breville Barista Pro. This special basket does not have any holes and is designed to block the flow of water. Insert the blind filter basket into the portafilter, making sure it fits snugly.
Preparing the Filter Basket
Grind a small amount of fresh coffee beans as if you were making a single shot. Place the ground coffee into the blind filter basket and tamp it evenly to create a compact puck. This step helps absorb water evenly during the flushing process.
Removing the portafilter
To remove the portafilter, first make sure that the machine is turned off and unplugged. Then, grasp the portafilter handle and pull it straight up and out of the group head. Be careful not to spill any coffee grounds or water as you do this.
If the portafilter is stuck, you can try the following
| Action | Description |
|---|---|
Tap the portafilter gently with the palm of your hand. |
This may help to dislodge any coffee grounds or water that is causing the portafilter to stick. |
Use a portafilter removal tool. |
These tools are specifically designed to help remove stuck portafilters. |
Contact Breville customer service. |
If you are unable to remove the portafilter on your own, you can contact Breville customer service for assistance. |
Activating the cleaning cycle
To activate the cleaning cycle on your Breville Barista Pro, follow these steps:
1. Fill the water tank with fresh water.
Use filtered or bottled water for best results.
2. Insert the cleaning tablet into the filter basket.
The cleaning tablet should be specially formulated for espresso machines.
3. Place a large container under the group head.
The cleaning cycle will flush out a significant amount of water, so make sure the container is large enough to hold it all.
– Turn the machine on by pressing the power button.
– Wait for the machine to heat up.
– Press the “clean” button on the control panel.
– The machine will start the cleaning cycle, which will take approximately 4 minutes.
– Once the cleaning cycle is complete, the machine will automatically turn off.
– Dispose of the used cleaning tablet and rinse the filter basket and container thoroughly before using the machine again.
Cleaning the portafilter and basket
The portafilter and basket are two of the most important parts of your Breville Barista Pro, and they need to be cleaned regularly to ensure that your coffee tastes its best.
To clean the portafilter, simply remove it from the machine and rinse it under hot water. You can also use a soft brush to remove any coffee grounds or residue.
To clean the basket, remove it from the portafilter and knock out any coffee grounds. You can then rinse the basket under hot water and use a soft brush to remove any remaining residue.
It is important to clean the portafilter and basket after every use. This will help to prevent the buildup of coffee grounds and residue, which can affect the taste of your coffee.
Removing the portafilter
To remove the portafilter, simply twist it to the left and pull it straight out.
Knocking out the coffee grounds
To knock out the coffee grounds, hold the portafilter upside down over a trash can and tap it firmly on the side.
Rinsing the portafilter and basket
To rinse the portafilter and basket, simply hold them under hot water and rinse them thoroughly.
Using a soft brush
If there is any stubborn coffee grounds or residue, you can use a soft brush to remove it.
| Component | Cleaning frequency |
|---|---|
| Portafilter | After every use |
| Basket | After every use |
Cleaning the steam wand
Steam wands are a central part of any espresso machine, allowing you to create delicious frothy milk for lattes, cappuccinos, and other drinks. However, if not cleaned properly, steam wands can become clogged with milk residue, leading to poor steam quality and even damage. Cleaning your steam wand regularly is essential to maintaining your espresso machine’s performance and longevity.
Materials you’ll need
| Item | Quantity |
|---|---|
| Microfiber cloth | 1 |
| Cleaning brush | 1 |
| Descaling solution | Optional |
Step 1: Turn off and unplug your machine
Before starting any cleaning, always turn off and unplug your espresso machine for safety.
Step 2: Disassemble the steam wand
Most steam wands consist of three parts: the steam wand tip, the steam wand body, and the steam wand gasket. To disassemble the steam wand, simply unscrew the steam wand tip and remove the steam wand body. The steam wand gasket is usually located at the base of the steam wand body and can be easily removed by hand.
Step 3: Clean the steam wand parts
Use a damp microfiber cloth to wipe down the steam wand tip, body, and gasket. If there is any stubborn milk residue, use a cleaning brush to gently scrub it away. Be careful not to damage the steam wand parts.
Step 4: Descale the steam wand (optional)
If you live in an area with hard water, your steam wand may need to be descaled periodically. To descale the steam wand, fill a small bowl with descaling solution according to the manufacturer’s instructions. Submerge the steam wand tip and body in the solution and let it soak for the recommended time. Once the soaking time is complete, rinse the steam wand parts thoroughly with clean water.
Step 5: Reassemble the steam wand
Once all the steam wand parts are clean, reassemble them in reverse order. First, insert the steam wand gasket into the base of the steam wand body. Then, screw the steam wand body onto the steam wand tip. Tighten the steam wand tip securely, but do not overtighten it.
Descaling the machine
Descaling is the process of removing mineral deposits that build up inside the machine over time. These deposits can affect the performance of the machine and the taste of the coffee. It is important to descale the machine regularly, especially if you live in a hard water area.
To descale the Breville Barista Pro, you will need to use a descaling solution. You can purchase a descaling solution from Breville or another retailer. Follow the instructions on the descaling solution package.
Once you have the descaling solution, follow these steps:
- Empty the water tank and fill it with the descaling solution.
- Place a large container under the steam wand.
- Turn on the machine and press the steam button.
- Allow the machine to run until the descaling solution is empty.
- Turn off the machine and let it sit for 30 minutes.
- Rinse the water tank and fill it with fresh water. Press the steam button to flush.
Repeat step 5, 2-3 times. Turn off the machine and let it stand for 5 minutes. - Flush the machine with 1L of fresh water.
- The machine is now descaled.
Replacing the portafilter
When cleaning your Breville Barista Pro, you may need to replace the portafilter. To do this:
- Turn off and unplug the machine.
- Remove the portafilter by turning it counterclockwise.
- Clean the portafilter and basket with hot water and a soft cloth.
- Reinsert the portafilter by turning it clockwise.
- Return the lever back to its original position.
- Tighten the portafilter snugly by turning it clockwise. Be careful not to overtighten.
- Insert a blind filter basket and run a cleaning cycle without grounds.
Step Action 1 Turn off and unplug the machine. 2 Remove the portafilter by turning it counterclockwise. 3 Clean the portafilter and basket with hot water and a soft cloth. 4 Reinsert the portafilter by turning it clockwise. 5 Return the lever back to its original position. 6 Tighten the portafilter snugly by turning it clockwise. Be careful not to overtighten. 7 Insert a blind filter basket and run a cleaning cycle without grounds. Discarding the cleaning water
After running the cleaning cycle, follow these steps to discard the cleaning water:
-
Place a large container (such as a mug or bowl) under the steam wand.
-
Turn the steam dial to the “steam” position.
-
Open the hot water dispenser valve and let the water run into the container.
-
Close the hot water dispenser valve when the container is full.
-
Turn the steam dial to the “off” position.
-
Empty the container and rinse it with clean water.
-
Repeat steps 3-6 until the water runs clear.
-
Turn off the machine and unplug it from the power outlet.
Additional tips
-
To avoid splattering, place the container close to the steam wand before opening the hot water dispenser valve.
-
If the water is not running clear after several rinses, you may need to descale the machine.
-
It is important to discard the cleaning water after each cleaning cycle to prevent the buildup of cleaner residue.
Rinsing the machine
To rinse the Breville Barista Pro, follow these steps:
- Empty the portafilter and fill it with water.
- Insert the portafilter into the machine and turn on the pump.
- Let the water run through the portafilter and into the drip tray.
- Repeat steps 2 and 3 until the water runs clear.
- Remove the portafilter and insert the blind filter.
- Turn on the pump and let the water run through the blind filter and into the drip tray.
- Repeat step 6 until the water runs clear.
- Turn off the pump and remove the blind filter.
- Insert the portafilter with the ground coffee and tamp it down.
To automatically rinse the machine press the following buttons in the following order
1. “1 CUP” button
2. “2 CUP” button
3. “CLEAN” button
4. “CLEAN” button again to execute the commandButton Action 1 CUP Sets time to 1 cup 2 CUP Sets time to 2 cup CLEAN Select Clean cycle Completing the cleaning process
Once you’ve completed the cleaning cycle, you’ll need to rinse the machine thoroughly to remove any remaining cleaning solution. To do this, follow these steps:
1. Remove the water tank and fill it with fresh water.
2. Reinsert the water tank into the machine.
3. Place a large container under the group head.
4. Press the steam button and let the machine run until the water in the container is clear.
5. Repeat steps 1-4 until the water in the container is free of any suds or cleaning solution residue.
6. Once the machine has been thoroughly rinsed, turn it off and unplug it.
7. Wipe down the exterior of the machine with a damp cloth to remove any remaining cleaning solution.
8. Allow the machine to dry completely before using it again.
9. You should also descale your machine every 2-3 months to remove any mineral buildup that may affect the taste of your coffee.
10. To descale your machine, follow these steps:| Step | Action |
|—|—|
| 1 | Fill the water tank with a descaling solution. |
| 2 | Reinsert the water tank into the machine. |
| 3 | Place a large container under the group head. |
| 4 | Press the steam button and let the machine run until the descaling solution has been completely flushed through the system. |
| 5 | Repeat steps 1-4 until the water in the container is clear. |
| 6 | Once the machine has been descaled, turn it off and unplug it. |
| 7 | Wipe down the exterior of the machine with a damp cloth to remove any remaining descaling solution. |
| 8 | Allow the machine to dry completely before using it again. |How To Flush Breville Barista Pro
Flushing your Breville Barista Pro is an important part of maintaining your machine and ensuring that it produces great-tasting coffee. By flushing the machine, you can remove any old coffee grounds or oils that may have built up in the system. This will help to improve the flavor of your coffee and prevent any bitter or stale taste.
To flush your Breville Barista Pro, follow these steps:
1.
Fill the water tank with fresh water.
2.
Place a container under the group head.
3.
Press and hold the 1 cup and 2 cup buttons simultaneously.
4.
The machine will start to pump water through the group head.
5.
Let the machine flush for about 10 seconds.
6.
Release the buttons.
Your Breville Barista Pro is now flushed and ready to use.
People Also Ask About How To Flush Breville Barista Pro
Why should I flush my Breville Barista Pro?
Flushing your Breville Barista Pro helps to remove any old coffee grounds or oils that may have built up in the system. This will help to improve the flavor of your coffee and prevent any bitter or stale taste.
How often should I flush my Breville Barista Pro?
You should flush your Breville Barista Pro regularly, especially if you use it frequently. A good rule of thumb is to flush the machine after every 100 shots of coffee.
Can I use vinegar to flush my Breville Barista Pro?
Yes, you can use vinegar to flush your Breville Barista Pro. However, it is important to use a dilute vinegar solution. To make a dilute vinegar solution, mix 1 part vinegar with 2 parts water.
Caution:
Do not use vinegar to flush your Breville Barista Pro if you have descale solution or any other cleaning agents in the water tank. This can damage the machine.
-
-
