Binding is the final step in completing a quilt, and it is an important one. Not only does binding finish the edges of the quilt and prevent them from fraying, but it also adds a decorative touch. There are many different ways to bind a quilt, but the most common method is the traditional hand-stitched binding. This method is relatively simple and can be done by hand or machine. Here is a step-by-step guide on how to join binding on a quilt:
First, you will need to cut the binding strips. The width of the binding strips will depend on the size of your quilt. For a small quilt, you can use 2 1/2-inch strips. For a larger quilt, you can use 3-inch strips. Once you have cut the binding strips, you will need to join them together. To do this, overlap the ends of the strips by about 1 inch and sew them together using a straight stitch. Continue sewing the binding strips together until you have one long strip that is long enough to go around the entire perimeter of your quilt.
Next, you will need to attach the binding to the quilt. To do this, place the binding strip on the edge of the quilt, with the folded edge of the binding facing the quilt. Pin the binding in place, making sure that it is evenly distributed around the perimeter of the quilt. Once the binding is pinned in place, you can sew it down using a blind stitch. A blind stitch is a small, invisible stitch that will hold the binding in place without being visible from the front of the quilt. Once the binding is sewn down, your quilt is complete!
How to Join Binding on a Quilt
Quilt binding adds a finishing touch to your quilt and helps protect the edges. If you’re finishing a quilt binding, you’ll need to join the ends together to complete the loop. Here’s a step-by-step guide to joining binding on a quilt:
- Overlap the binding ends. Overlap the ends of the binding by about 2 inches.
- Fold the edges under. Fold the raw edges of the binding under so they meet in the center. Press the fold with an iron.
- Stitch the binding. Stitch the binding in place using a small stitch length. Start stitching about 1/4 inch from the folded edge and stitch all the way to the end of the overlap.
- Trim the excess binding. Trim any excess binding from the edges of the quilt.
Once you’ve joined the binding, you can finish it by stitching it in place around the edges of the quilt. You can use a blind stitch, which will be invisible from the front of the quilt, or a decorative stitch, which will add a decorative element to your quilt.
People also ask
How do you join binding on a quilt mitered?
To join binding on a quilt mitered, you’ll need to cut the binding at a 45-degree angle. Overlap the ends of the binding by about 2 inches, and then fold the edges under so they meet in the center. Press the fold with an iron, and then stitch the binding in place using a small stitch length.
How do you join binding on a quilt without mitering?
To join binding on a quilt without mitering, you can simply overlap the ends of the binding by about 2 inches and stitch them together. You can also use a decorative stitch to add a finishing touch to the join.
What kind of thread should I use to join quilt binding?
You should use a strong thread to join quilt binding, such as a cotton or polyester thread. The thread should be a neutral color that will blend in with the fabric of the quilt.
