lacing Jordan shoes may seem like a simple task, but there are actually a few different ways to do it. The most common method is the **criss-cross lace** and the straight lace method both of which can be customized to create a unique look. No matter which method you choose, make sure to lace your shoes tightly to prevent them from coming undone during play.
To **criss-cross lace** your Jordan shoes, start by threading the laces through the bottom two eyelets on one side of the shoe. Then, cross the laces over each other and thread them through the next two eyelets on the other side of the shoe. Continue criss-crossing the laces up the shoe until you reach the top. To finish, tie the laces in a bow or knot. For a more secure fit, you can double-lace your shoes by repeating the criss-cross pattern a second time.
To straight lace your Jordan shoes, start by threading the laces through the bottom two eyelets on one side of the shoe. Then, thread the laces straight up through the next two eyelets on the other side of the shoe. Continue threading the laces straight up the shoe until you reach the top. To finish, tie the laces in a bow or knot. Straight lacing is a more simple and classic look than criss-cross lacing. It is also a good choice for people who have wide feet, as it provides a more even distribution of pressure across the foot.
Unlacing the Knots
Before you can properly lace your Jordan shoes, you need to make sure the knots are untied. Here’s a step-by-step guide on how to do so:
- Identify the Knot: Locate the knot on the top of the shoe, where the two laces are crossed over each other.
- Loosen the Knot: Gently pull on the ends of the laces to loosen the knot. Avoid yanking or jerking the laces, as this could damage them.
- Untie the Laces: Once the knot is loose, pull the laces apart and they will untie. Make sure to hold onto both ends of the laces so that you don’t lose track of them.
- Thread the lace through the bottom two eyelets on one side of the shoe.
- Cross the lace over and thread it through the bottom two eyelets on the other side of the shoe.
- Continue lacing in this manner, alternating sides and crossing the lace over as you go.
- Once you reach the top of the shoe, thread the lace through the top two eyelets and tie a knot.
- To tighten the laces, pull on the ends of the lace simultaneously. To loosen the laces, pull on the lace on one side of the shoe and relax the lace on the other side.
Additional Tips for Straight Lacing
- For a snugger fit, use a lace that is slightly shorter than the length of the shoe.
- If you want to create a more decorative look, you can use laces of different colors or patterns.
- To prevent the laces from coming undone, double-knot them or use a lace lock.
Lace Length Shoe Size 45 inches Men’s 7-9 54 inches Men’s 10-12 63 inches Men’s 13-15 Criss-Cross Lacing Pattern
This method is the most common and straightforward option, offering a secure and comfortable fit.
- Thread the laces through the bottom two eyelets from the outside in.
- Cross the laces over each other and thread them through the next two eyelets from the inside out.
- Repeat steps 1 and 2, working your way up the shoe.
- When you reach the top two eyelets, loop the laces through from the outside in.
- Tie the laces in a double knot or bow.
Detailed Steps for Tying Criss-Cross Laces
To ensure a snug and secure fit, follow these detailed instructions for the criss-cross lacing pattern:
Step Description 1 Insert the laces into the bottom two eyelets, bringing them up from the outside and through the holes. 2 Cross the right lace over the left lace and thread it through the second and third eyelets from the inside out. 3 Bring the left lace across the right lace and thread it through the first and second eyelets from the inside out. 4 Repeat steps 2 and 3 with the next pair of eyelets. 5 Continue criss-crossing the laces until you reach the top two eyelets. 6 For the top two eyelets, thread the laces from the outside in, creating a secure loop on the outside. 7 Tie the laces in a double knot or bow to secure the fit and prevent the shoes from becoming loose. Figure-Eight Lacing Style
The Figure-Eight Lacing Style is a classic and popular method for lacing the JT Jordan Shoes. it provides a secure and comfortable fit while enhancing the aesthetic appeal of the shoes.
To perform this lacing style, follow these steps:
- Start by lacing the shoes conventionally up to the third or fourth lace hole.
- Then, take the right lace and pass it under and over the fourth lace hole on the left side.
- Next, take the left lace and pass it under and over the third lace hole on the right side.
- Continue this criss-cross pattern, alternating between the two laces.
- When you reach the top, pass the laces through the last lace hole and tie them securely.
- Double-check the lacing to ensure it’s even and tight enough for a snug fit.
- Finally, tuck the excess lace ends neatly into the shoes to maintain a clean and polished look.
Lace Color Recommended Style Monochrome Figure-Eight Lacing Multicolor Criss-Cross Lacing Contrasting Colors Alternating Lacing Tightening and Securing the Laces
Once you’ve threaded the laces through the last pair of holes, it’s time to tighten and secure them. Here’s a step-by-step guide on how to do it:
1. Pull both ends of the laces evenly
To get started, pull both ends of the laces evenly so that they’re the same length. This will help ensure that the laces are evenly distributed and that they won’t be too tight or loose.
2. Cross the laces over each other
Next, cross the laces over each other in a single knot. Pull the laces tight to secure the knot, but be careful not to overtighten them.
3. Create a double knot
To add extra security, create a double knot. Simply repeat the steps for creating the first knot, but this time with the two ends of the laces that are closer to the shoe. This will result in a more secure knot that’s less likely to come undone.
4. Tuck the laces into the tongue or lace loops
If desired, you can tuck the ends of the laces into the tongue or lace loops on the shoe. This will help keep the laces out of the way and prevent them from getting caught on anything.
Completing the Lace-Up
Once the laces have been criss-crossed across the top of the shoe, it’s time to complete the lace-up. Here’s how to do it:
9. Pull the Laces Through the Last Two Loops
Take the lace tucked into the first loop and pull it through the last loop, forming a tight knot. Repeat this step with the lace on the other side. This will secure the lace in place and complete the lace-up.
Extra Detail:
When pulling the laces through the last two loops, it’s important to apply even pressure to both sides to ensure a balanced and even knot. Avoid pulling too tightly, as this can damage the laces or the shoe itself. Additionally, make sure the knot is not too loose, as it could unravel during wear.
Step 9: Pull the Laces Through the Last Two Loops 1. Take the lace tucked into the first loop and pull it through the last loop, forming a tight knot. 2. Repeat this step with the lace on the other side. 3. Apply even pressure to both sides to ensure a balanced and even knot. 4. Avoid pulling too tightly or too loosely. Enhancing the Lace Style
The beauty of the JT Jordan shoes lies in their versatility. With a few simple lace tricks, you can customize the look of your shoes to match your style.
10. Weave It Up
For an intricate look, try the woven lace technique. Start by following steps 1-4, then cross the laces over each other and insert them through the holes diagonally opposite. Repeat this process until you reach the top of the shoe.
Lace Weaving Diagram:
Step 1: Lace normally through the bottom two holes.
Step 2: Cross laces and insert diagonally opposite.
Step 3: Continue crossing and inserting diagonally.
Step 4: Lace normally through the top two holes.
This technique creates a criss-cross pattern that adds depth and style to your JT Jordan shoes.
How to Lace the Jt Jordan Shoes
Lace your Jt Jordan shoes in a way that is both secure and stylish. Here are four easy steps to follow:
- Run the laces through the bottom holes. Starting at the bottom of the shoe, thread the laces through the two bottom eyelets. Pull the laces tight to create a snug fit.
- Criss-cross the laces. Take the left lace and cross it over the right lace. Thread the left lace through the second eyelet on the right side. Then, take the right lace and cross it over the left lace, threading it through the second eyelet on the left side.
- Continue criss-crossing the laces. Continue criss-crossing the laces up the shoe, alternating between left and right eyelets.
- Tie the laces. Once you reach the top of the shoe, tie the laces in a double knot. Trim any excess lace.
You can also experiment with different lacing patterns to create a unique look. For example, you can try the “bunny ear” lacing pattern, which creates a loop on the top of the shoe. Or, you can try the “criss-cross” lacing pattern, which creates a criss-cross pattern on the top of the shoe.
People Also Ask About How to Lace The Jt Jordan Shoes
How tight should I lace my Jt Jordan shoes?
The laces should be snug but not too tight. You should be able to fit a finger between the laces and your foot.
Can I use any type of lace in my Jt Jordan shoes?
Yes, you can use any type of lace in your Jt Jordan shoes. However, different types of laces will create different looks.
How often should I lace my Jt Jordan shoes?
You should lace your Jt Jordan shoes every time you wear them. This will help to keep your shoes looking their best and ensure a secure fit.
Tip: If the knot is particularly tight, you can use a pen or pencil to gently pry it apart.
Preparing for Lacing
Acquire Necessary Materials
* Your Jordan sneakers
* Shoelaces
Clean the Laces and Shoes
Before you start lacing, it’s important to clean your laces and shoes to remove any dirt or debris. This will ensure a smooth lacing process and prevent the laces from getting tangled or damaged.
Lace Hole Hierarchy
The Jordan shoes feature multiple lace holes, each with its own specific role in the lacing process:
| Lace Hole | Purpose |
|---|---|
| Top Eyelet | Adjusts the overall tightness of the lacing |
| Upper Lace Holes | Provides a secure fit around the ankle |
| Mid Lace Holes | Offers additional support to the foot’s arch |
| Lower Lace Holes | Creates a snug fit around the ball of the foot |
Choosing the Right Lace Length
Determining the ideal lace length for your JT Jordan shoes is crucial for a comfortable and secure fit. Here are some guidelines to help you make the right choice:
Standard Eyelets: If your shoes have standard eyelet spacing, measure the distance from the bottom eyelet to the top eyelet on one side of the shoe. Double this measurement for the appropriate lace length.
Lace Holes: If your shoes feature additional lace holes at the top or bottom, measure the distance from the bottom lace hole to the top lace hole on one side of the shoe, including any additional holes. Double this measurement to determine the lace length.
| Shoe Size | Lace Length |
|---|---|
| Youth (1-6) | 36-42 inches |
| Women’s (5-10) | 45-54 inches |
| Men’s (7-12) | 54-63 inches |
| Men’s (13-15) | 63-72 inches |
Personal Preferences: Consider your personal lacing style and preferences. If you prefer a looser fit, opt for a longer lace. For a tighter fit, choose a shorter lace.
Double-Checking: Once you have determined the approximate lace length, thread the lace through the eyelets and lace the shoes up. If the lace ends up being too short or too long, adjust the length accordingly.
Alternate Lacing Method
This lacing method provides a snugger fit and helps prevent heel slippage. It’s also a popular choice for skate shoes.
Step 1:
Start by threading the laces through the bottom two eyelets from the outside in.
Step 2:
Cross the laces over each other and feed them through the next two eyelets on the opposite side, from the inside out.
Step 3:
Continue crossing the laces over each other and feeding them through the remaining eyelets, alternating between outside and inside.
Step 4:
For the last two eyelets, feed the laces through the same side they came out of. This creates a loop on the top of the shoe.
Step 5:
Tie the laces together as usual.
Here’s a table summarizing the lacing pattern:
| Step | Lace Path |
|---|---|
| 1 | Start from outside in, bottom two eyelets |
| 2 | Cross laces, inside out, next two eyelets opposite side |
| 3 | Continue crossing laces, alternating outside and inside |
| 4 | Last two eyelets, feed laces through same side, creating a loop |
| 5 | Tie laces together |
Straight Lacing Technique
The straight lacing technique is the simplest and most common way to lace your Jordan shoes. It provides a secure and comfortable fit, making it a good option for everyday wear.
