5 Easy Steps To Sew An Invisible Zipper

Invisible zippers are a great way to add a touch of elegance to your garments. They are perfect for dresses, skirts, and blouses, and they can also be used in home decor projects. However, inserting an invisible zipper can be a bit tricky, especially if you’ve never done it before. But don’t worry, with a little practice, you’ll be able to master this technique in no time. Here’s a step-by-step guide on how to put in an invisible zipper.

First, you’ll need to gather your supplies. You’ll need an invisible zipper, a sewing machine, a zipper foot, and a pair of scissors. Once you have your supplies, you can start by preparing the zipper. To do this, simply fold the zipper tape in half and press it with an iron. This will help to stabilize the zipper and make it easier to sew.

Next, you’ll need to attach the zipper to the fabric. To do this, place the zipper tape along the edge of the fabric, with the folded edge of the tape facing the fabric. Pin the zipper in place, and then sew it on using a zipper foot. Be sure to use a small stitch length, and sew close to the edge of the zipper tape. Once the zipper is sewn on, you can finish the garment by sewing the remaining edges together.

Preparing the Fabric and Zipper

Materials You’ll Need:

• Invisible zipper
• Fabric
• Measuring tape or ruler
• Iron and ironing board
• Zipper foot (optional)
• Thread

Steps:

1. Measure and Mark the Fabric: Measure the length of the seam where you want to insert the zipper. Add 1/2 inch to each end to allow for seam allowance. Mark this length on the wrong side of the fabric using a measuring tape or ruler.

2. Prepare the Zipper:

   • Flatten the Zipper: Starting from one end, carefully press down on the zipper teeth with the edge of your iron or a plastic spoon to flatten them. This will make them easier to sew and less likely to pucker.
   • Create Center Crease: Place the flattened zipper face-down on the ironing board. Use the iron to press a crease down the center of the zipper tape. This will serve as a guide for aligning the zipper.
   • Cut the Zipper Tape: If necessary, trim the zipper tape to the desired length, ensuring you include the extra 1/2 inch on each end for seam allowance.
   • Apply Zipper Adhesive: (Optional) Some invisible zippers come with adhesive tape applied to the underside. If yours does, peel off the backing and apply the adhesive to the wrong side of the fabric, aligning it with the marked seam. This will help keep the zipper in place while you sew.

3. Pin the Zipper to the Fabric: Align the center crease of the zipper with the marked seam on the fabric. Pin the zipper in place, starting from the center and working towards both ends. Make sure the edges of the fabric align evenly with the edges of the zipper.

Pinning and Basting the Zipper in Place

1. Center the zipper on the fabric. Align the teeth of the zipper with the seam allowance on one side of the fabric. Pin the zipper in place at the top and bottom of the seam.

2. Baste the zipper in place. Using a needle and thread, baste the zipper to the fabric along the seam allowance. This will hold the zipper in place while you sew it.

3. Set the sewing machine for a blind hem stitch. This stitch will create a small, invisible seam that will hide the zipper.

4. Sew the zipper in place. Start sewing at the bottom of the zipper and sew along the seam allowance, keeping the needle as close to the zipper teeth as possible. When you reach the top of the zipper, stop sewing and unpick the basting stitches.

Here is a table summarizing the steps for pinning and basting the zipper in place:

How to Put in an Invisible Zipper

An invisible zipper is a great way to add a sleek and professional finish to your garment. It is perfect for dresses, skirts, and pants. Putting in an invisible zipper can seem daunting at first, but with a little practice, you can get the hang of it in no time. Here are the steps on how to put in an invisible zipper:

1. Choose the right zipper. Not all zippers are created equal. For an invisible zipper, you will need a zipper that has a thin, narrow coil and a lightweight pull.
2. Prepare the fabric. Before you sew in the zipper, you need to prepare the fabric. Fold the two edges of the fabric together, right sides facing. Press the fold with an iron to create a crease.
3. Sew in the zipper. Now it’s time to sew in the zipper. Start by sewing the zipper tape to one side of the fabric, using a zipper foot. Once the zipper is sewn in, fold the other side of the fabric over the zipper and press it down.
4. Finish the zipper. To finish the zipper, topstitch around the edges of the zipper tape. This will help to secure the zipper in place and give it a polished look.
   

   People Also Ask About How to Put in an Invisible Zipper

   How do you sew an invisible zipper by hand?

   To sew an invisible zipper by hand, you will need a needle, thread, and a pair of pliers. Start by folding the two edges of the fabric together, right sides facing. Press the fold with an iron to create a crease.

   Next, take the zipper and open it up. Place the zipper teeth along the crease in the fabric, with the pull on the right side. Sew the zipper in place using a small stitch.

   Once the zipper is sewn in, fold the other side of the fabric over the zipper and press it down. Topstitch around the edges of the zipper tape to finish it off.

   How do you sew an invisible zipper into a dress?

   To sew an invisible zipper into a dress, follow the steps above. Be sure to choose a zipper that is the same length as the opening in the dress.

   Once the zipper is sewn in, you can finish the dress by hemming the bottom and sewing on any other embellishments.

   How do you shorten an invisible zipper?

   To shorten an invisible zipper, you will need to cut off the excess zipper tape. Be sure to leave enough tape on the zipper to sew it into the garment.

   Once the zipper tape is cut, you can sew the zipper into the garment using the steps above.