The Nissan Rogue has been a popular choice for drivers for years, and for good reason. It’s a reliable and affordable SUV that’s perfect for families and commuters alike. However, even the most reliable cars need repairs from time to time, and one common repair is replacing the side mirror cover. If your Nissan Rogue’s side mirror cover has been damaged, don’t worry – it’s a relatively easy repair that you can do yourself with a few simple tools.
In this article, we’ll show you how to remove a Nissan Rogue side mirror cover in just a few minutes. We’ll also provide some tips on how to avoid damaging the mirror or the cover during the process. So if you’re ready to get started, gather your tools and let’s get to work!
Before you begin, it’s important to gather all of the tools you’ll need. You’ll need a Phillips head screwdriver, a flat head screwdriver, and a pair of pliers. Once you have your tools, you can follow these steps to remove the side mirror cover:
Safety Precautions
It is essential to prioritize safety when working on your Nissan Rogue. Follow these precautions to minimize the risk of injury or damage to your vehicle:
1. Park the vehicle on a level surface and engage the parking brake. This will prevent the vehicle from rolling while you are working on it, even if the transmission is in park. It is also a good idea to chock the wheels to provide additional stability.
2. Disconnect the negative terminal of the battery. This will prevent any electrical shorts from occurring while you are working on the mirror cover. To disconnect the negative terminal, use a wrench to loosen the nut that holds the cable in place. Then, pull the cable off of the terminal.
3. Wear safety glasses and gloves. This will protect your eyes and hands from any debris or sharp edges that may be present when removing the mirror cover.
4. Use the proper tools. A Phillips head screwdriver is required to remove the screws that hold the mirror cover in place. Do not use a flathead screwdriver, as this could damage the screws or the mirror cover.
5. Take your time and be careful. Removing the mirror cover is a relatively simple process, but it is important to take your time and be careful to avoid damaging the mirror or the vehicle.
| Safety Precaution | Why it is Important |
|---|---|
| Park the vehicle on a level surface and engage the parking brake. | Prevents the vehicle from rolling while you are working on it. |
| Disconnect the negative terminal of the battery. | Prevents any electrical shorts from occurring. |
| Wear safety glasses and gloves. | Protects your eyes and hands from any debris or sharp edges. |
| Use the proper tools. | Prevents damage to the screws or the mirror cover. |
| Take your time and be careful. | Ensures that you do not damage the mirror or the vehicle. |
Locating the Side Mirror Cover
Step 1: Begin by locating the side mirror you wish to remove the cover from. The side mirrors are situated on the driver’s and passenger’s doors.
Step 2: Once you have located the side mirror, identify the cover that encapsulates the mirror’s housing. The cover is typically made of a durable plastic or composite material and may be painted to match the exterior color of your Nissan Rogue.
Step 3: Examine the cover for any visible clips or release mechanisms. These may be located along the edges or back of the cover and are designed to hold it securely in place.
Step 4: In some cases, the side mirror cover may be secured by adhesive or sealant. If this is the case, you may need to use a plastic pry tool or a heat gun to gently loosen or release the adhesive before attempting to remove the cover.
Step 5: Once you have identified the release mechanisms or have loosened the adhesive, proceed to remove the side mirror cover by carefully releasing the clips or prying the cover away from the mirror’s housing.
Identifying the Retention Clips
Before you can remove the side mirror cover on your 2009 Nissan Rogue, you need to locate the retention clips that hold it in place. These clips are typically made of plastic and are located around the perimeter of the cover. To identify them, you can use a flashlight to look for small, circular indentations on the inside of the cover. These indentations are where the clips are located.
Once you have identified the retention clips, you need to determine how they are attached to the cover. In most cases, the clips will be either snapped into place or held in place with screws. If the clips are snapped into place, you can use a pry tool to gently pry them up and release the cover. If the clips are held in place with screws, you will need to remove the screws before you can remove the cover.
Here is a table that summarizes the steps involved in identifying the retention clips on a 2009 Nissan Rogue side mirror cover:
| Step | Description |
|---|---|
| 1 | Locate the small, circular indentations on the inside of the cover. |
| 2 | Determine if the clips are snapped into place or held in place with screws. |
| 3 | If the clips are snapped into place, use a pry tool to gently pry them up and release the cover. If the clips are held in place with screws, remove the screws before removing the cover. |
Releasing the Retention Clips
The retention clips holding the side mirror cover in place are typically located around the perimeter of the cover. To release these clips, you will need to use a trim removal tool or a flathead screwdriver wrapped in a cloth to avoid scratching the paint.
Locate the first retention clip and carefully insert the trim removal tool or screwdriver into the gap between the cover and the mirror housing. Apply gentle pressure to pry the clip away from the housing. Repeat this process for each retention clip around the perimeter of the cover.
Additional Tips for Releasing the Retention Clips
- Be patient and take your time to avoid breaking the clips.
- If you encounter any resistance, do not force the tool. Instead, try using a different angle or applying more gentle pressure.
- Once one or two clips are released, the cover will become loose enough to remove by hand. However, be careful not to pull too hard on the cover, as the remaining clips may still be engaged.
Removing the Side Mirror Cover
The side mirror cover on a Nissan Rogue 09 can be removed in a few simple steps. Here’s how to do it:
- Locate the release tabs. There are two release tabs located on the back of the side mirror cover. One tab is located at the top of the cover, and the other tab is located at the bottom.
- Press the release tabs. Use your fingers to press the release tabs inward. This will release the cover from the mirror.
- Pull the cover off. Once the release tabs are pressed, pull the cover straight off the mirror.
- Disconnect the electrical connector. If the side mirror cover has an electrical connector, disconnect it before removing the cover completely.
- Remove the old cover. Once the electrical connector is disconnected, you can remove the old cover. Note the location of the mounting points on the mirror housing, as they will need to be aligned when installing the new cover.
- Install the new cover. Align the new cover with the mounting points on the mirror housing. Press the cover into place until it snaps into position.
- Reconnect the electrical connector. If the side mirror cover has an electrical connector, reconnect it before fully securing the cover.
- Push the cover into place. Once the electrical connector is reconnected, push the cover into place until it fits snugly against the mirror.
| Tools Required |
|---|
| – Small flat-head screwdriver |
| – Phillips head screwdriver |
| – Trim removal tool (optional) |
Disconnecting the Electrical Connectors
1. Before you begin, make sure that the battery is disconnected to avoid any electrical accidents.
2. Using a plastic pry tool or a small flat-head screwdriver, carefully pry up the edges of the mirror cover to release the clips holding it in place. Work your way around the cover, gently prying until it pops off.
3. Once the cover is removed, you will see the electrical connectors attached to the back of the mirror assembly. These connectors typically have a small tab or button that you need to press to release them.
4. Locate the tab or button and press it to release the connector. Gently pull the connector straight out of the socket. Repeat this process for all the electrical connectors attached to the mirror assembly.
5. With all the electrical connectors disconnected, you can now remove the mirror assembly from the vehicle.
| Electrical Connector Types | |
|---|---|
| Connector Type | Description |
| Tab Connector | Has a small tab that needs to be pressed to release |
| Button Connector | Has a small button that needs to be pressed to release |
| Pull-Out Connector | Simply pull straight out of the socket |
| Item | Description |
|---|---|
| Lubricate Clips | Apply a small amount of silicone lubricant to the clips to prevent squeaking and improve longevity. |
| Avoid Overtightening | Do not overtighten the side mirror cover as this can damage the clips or housing. |
| Check Regularly | Periodically check the side mirror cover for any signs of loose clips or wear. |
Securing the Retention Clips
With the mirror cover removed, you’ll need to secure the retention clips to ensure the new cover fits snugly. These clips are responsible for holding the cover in place and preventing it from wobbling or detaching while you drive. Follow these steps carefully to secure the clips:
Step 1: Locate the Retention Clips
Examine the edges of the mirror base where the old cover was attached. You’ll find small, plastic clips that help hold the cover in place.
Step 2: Insert the Cover into the Clips
Align the new mirror cover with the base and gently push it towards the retention clips. You may need to exert some light force to engage the clips into the cover’s slots.
Step 3: Check for Firm Attachment
Once the cover is inserted into the clips, pull gently on it to ensure it’s securely attached. Make sure there is no movement or wobbling, as this could indicate that the clips are not fully engaged.
Step 4: Snap the Cover into Place
After confirming that the clips are engaged, apply pressure around the edges of the cover to fully snap it into place. You should hear a series of audible clicks as the clips lock into position.
Step 5: Inspect the Final Placement
Once the cover is snapped in, take a step back and observe the mirror from different angles. Ensure that it is properly aligned and sits flush against the mirror base. There should be no visible gaps or uneven surfaces.
Step 6: Test the Mirror Function
Before reattaching the side mirror, adjust its position and ensure that it provides a clear and unobstructed view. Make sure the adjustment knobs are working smoothly and that the mirror can be easily manipulated.
Reconnecting the Electrical Connectors
9. Locate and disconnect the electrical connectors:
| Connector | Location |
|---|---|
| Turn signal connector | Behind the turn signal lens |
| Camera connector (if equipped) | Behind the mirror assembly |
| Heater connector (if equipped) | Near the heater element on the mirror |
To disconnect the connectors:
- Locate the release tab or button on the connector.
- Press the release tab or button and gently pull the connector straight out.
To reconnect the connectors:
- Align the connector with its corresponding socket.
- Push the connector into the socket until it securely clicks into place.
- Check that all electrical connectors are properly reconnected and secure.
Note: If you have any difficulty disconnecting or reconnecting the electrical connectors, consult your vehicle’s repair manual or seek professional assistance.
Final Inspection
1. Now that you’ve successfully replaced the side mirror cover, take a step back and give it a final once-over. Make sure that the cover is secure and properly aligned with the mirror assembly.
2. Inspect the surrounding area of the mirror to ensure that there are no scratches or damages caused during the replacement process.
3. Double-check the electrical connections and ensure that the turn signal and puddle light are functioning correctly.
4. Test the manual adjustment mechanisms, if applicable, verifying that the mirror can be adjusted smoothly and securely.
5. Check for any loose screws or bolts and tighten them if necessary.
6. Clean any fingerprints or smudges from the mirror surface using a soft, clean cloth.
7. Stand back and admire the refreshed look of your Nissan Rogue. The new side mirror cover adds a touch of style and improves visibility for safe driving.
8. Enjoy the enhanced aesthetics and improved functionality of your side mirror.
9. If you’re satisfied with the results and everything is functioning properly, you have effectively completed the side mirror cover replacement process.
10. Congratulations! You have successfully restored the side mirror cover of your Nissan Rogue, saving yourself both time and money compared to taking it to a repair shop.
How to Remove a Nissan Rogue Side Mirror Cover 09
Removing the side mirror cover on a Nissan Rogue 09 is a relatively simple process that can be completed in a few minutes with the right tools. Here’s a step-by-step guide to help you remove the side mirror cover on your Nissan Rogue 09:
1.
Gather your tools. You will need a Phillips head screwdriver, a flathead screwdriver, and a plastic pry tool.
2.
Locate the screws that hold the side mirror cover in place. There are two screws located on the back of the mirror cover. Use the Phillips head screwdriver to remove the screws.
3.
Use the flathead screwdriver to pry the side mirror cover off of the mirror housing. Start by prying at the bottom of the cover and work your way around the edges. Be careful not to damage the paint on your car.
4.
Once the side mirror cover is loose, pull it straight off of the mirror housing.
People Also Ask About How to Remove a Nissan Rogue Side Mirror Cover 09
How do I remove the side mirror cover on my Nissan Rogue without breaking it?
Use a plastic pry tool to remove the side mirror cover on your Nissan Rogue. This will help to prevent damage to the paint on your car.
Can I replace the side mirror cover on my Nissan Rogue myself?
Yes, you can replace the side mirror cover on your Nissan Rogue yourself. The process is relatively simple and can be completed in a few minutes with the right tools.
Where can I buy a replacement side mirror cover for my Nissan Rogue?
You can purchase a replacement side mirror cover for your Nissan Rogue from a Nissan dealership, an auto parts store, or an online retailer.
