You might be wondering how to remove a doona from its base. It’s a simple process that only takes a few minutes. First, you’ll need to find the zipper that connects the doona to the base. It’s usually located on the side of the doona. Once you’ve found the zipper, unzip it all the way.
Once the zipper is open, you’ll be able to pull the doona out of the base. Be careful not to snag the doona on anything as you’re pulling it out. Once the doona is out of the base, you can fold it up and put it away. To put the doona back in the base, simply reverse the process. First, put the doona in the base. Then, zip up the zipper all the way.
Here are some additional tips for removing a doona from its base:
Check the Release Lever
Ensure that the lever or button responsible for releasing the Doona is pushed in or activated. This typically involves pressing or pulling a lever located at the base of the Doona.
Locate the Release Buttons
The release buttons are usually located on both sides of the Doona’s base. They are often marked with red or blue buttons or symbols.
Press and Hold the Buttons
Simultaneously press and hold the release buttons. Do not release them yet.
Lift the Doona
While holding down the release buttons, gently lift the Doona straight upwards from the base.
Pull the Doona Away
Once you have lifted the Doona off the base slightly, you can release the release buttons and pull the Doona completely away from the base.
Detach the D-Ring
On some models of Doona, there may be a D-ring that connects the Doona to the base. If present, undo the D-ring by sliding it open.
Remove the Doona From the Wheels
When you have detached the D-ring, you can now lift the Doona off the wheels.
Disassemble the Wheels
If necessary, you can disassemble the wheels by pressing the small release buttons on each wheel and pulling them out.
Reattaching the Doona to the Base
To reattach the Doona to the base, simply reverse the steps outlined above.
Note: Always refer to your specific Doona model’s user manual for precise instructions on how to remove and reattach the Doona from its base.
How To Remove Doona From Base
Removing a doona from its base can be a simple task, but it is important to follow the correct steps to avoid damaging the doona or the base. Here are the steps on how to remove a doona from its base:
- Unzip the doona cover. This will expose the doona insert.
- Locate the ties or buttons that are securing the doona insert to the base. These are usually located at the corners of the doona.
- Untie or unbutton the ties or buttons.
- Carefully lift the doona insert out of the base.
Once the doona insert has been removed from the base, it can be washed and dried according to the manufacturer’s instructions.
People Also Ask
How do I wash a doona?
Doonas can be washed in a washing machine on a gentle cycle. Use cold water and a mild detergent. Do not use bleach or fabric softener. Once the doona has been washed, it should be dried on a low heat setting.
How do I dry a doona?
Doonas can be dried in a clothes dryer on a low heat setting. Do not over-dry the doona, as this can damage the fabric.
How do I store a doona?
Doonas should be stored in a cool, dry place. Do not store doonas in plastic bags, as this can cause the fabric to mildew.
