Reprogramming your Chamberlain remote control to work with an older Genie Pro98 garage door opener is a common task that can be accomplished with a few simple steps. By following these instructions carefully, you can quickly and easily get your remote working again. To begin, you will need to gather the necessary materials, which include the Chamberlain remote control, the Genie Pro98 garage door opener, and a ladder. Once you have gathered your materials, you can begin the reprogramming process.
The first step is to locate the Learn button on the Genie Pro98 garage door opener. The Learn button is typically located on the back or side of the opener. Once you have located the Learn button, press and hold it for 3 seconds. The LED light on the opener will begin to flash. Next, press and hold the desired button on the Chamberlain remote control. Hold the button until the LED light on the opener stops flashing. The remote control is now programmed to the Genie Pro98 garage door opener.
Test the remote control by pressing the programmed button. The garage door should open or close. If the remote control does not work, repeat the programming steps. If you continue to have problems, consult the user manuals for the Chamberlain remote control and the Genie Pro98 garage door opener. Additionally, you can contact the manufacturers of either product for further assistance.
Identifying the Chamberlain Remote Model and Genie Pro98 Opener Type
To reprogram a Chamberlain remote with an older Genie Pro98 opener, you’ll need to first identify the specific models of both devices. Here’s how to do that:
Chamberlain Remote Model
Chamberlain remotes typically have a model number printed on the back of the device. Look for a sequence of letters and numbers, such as “CMR100” or “KLIK2U.” If you can’t find the model number, consult the user manual that came with the remote.
Some common Chamberlain remote models that are compatible with Genie Pro98 openers include:
| Model | Frequency |
|---|---|
| CMR100 | 315 MHz |
| KLIK2U | 390 MHz |
| 832LM | 390 MHz |
Genie Pro98 Opener Type
Genie Pro98 openers are typically identified by a model number printed on the motor housing or on a sticker attached to the unit. Look for a sequence of letters and numbers, such as “PRG9805” or “PRG9810.” If you can’t find the model number, consult the user manual that came with the opener.
The Genie Pro98 is a three-button garage door opener that operates on either 315 MHz or 390 MHz frequency. Make sure to identify the correct frequency of your opener before purchasing a replacement remote.
Gathering Necessary Tools and Materials
To successfully reprogram your Chamberlain remote with an older Genie Pro98 garage door opener, you will need the following tools and materials:
Chamberlain Remote with Older Genie Pro98
The first and most important item you will need is the remote you want to reprogram. Make sure it is a Chamberlain remote that is compatible with the Genie Pro98 garage door opener.
Genie Pro98 Garage Door Opener
You will also need the garage door opener you want to connect to your remote. In this case, it should be a Genie Pro98 garage door opener.
Ladder (Optional)
If your garage door opener is mounted high above the ground, you may need a ladder to reach it. This will allow you to access the programming button on the opener.
Step Stool (Optional)
If you do not have a ladder, you can use a step stool to reach the programming button on the opener. However, this may not be as stable as using a ladder.
Phillips Head Screwdriver
In some cases, you may need to remove the cover of the garage door opener to access the programming button. A Phillips head screwdriver will be necessary for this task.
Instructions
Finally, you should gather the instructions that came with your Chamberlain remote and Genie Pro98 garage door opener. These instructions will provide you with the specific steps on how to reprogram your remote.
Preparing the Chamberlain Remote for Reprogramming
Before you can reprogram your Chamberlain remote with an older Genie Pro98, you must prepare the remote for reprogramming. Here are the steps you need to take:
- Locate the erase button. The erase button is typically located on the back of the remote or inside the battery compartment.
- Press and hold the erase button. Continue holding the button until the LED light on the remote starts to flash. This may take up to 10 seconds.
- Release the erase button. The LED light will continue to flash, indicating that the remote has been reset and is ready to be reprogrammed.
- Locate the Smart Button: The Smart Button is typically located on the back of the remote control. It may be labeled with an “S” or a lightning bolt symbol.
- Press and Hold the Smart Button: Press and hold the Smart Button for approximately 5 seconds, or until the remote’s LED light begins to flash rapidly.
- Hold Down the Desired Button: While the Smart Button is still pressed, simultaneously press and hold down the button on the remote that you wish to reprogram.
- Release the Smart Button: Once the desired button is held down, release the Smart Button. The LED light on the remote will continue to flash slowly.
- Follow the Remote’s Instructions: The remote will now guide you through the rest of the reprogramming process. Typically, it will instruct you to press the button on the Genie Pro98 opener that you wish to pair with the Chamberlain remote.
Step Action 1 Locate the Smart Button on the Chamberlain remote. 2 Press and hold the Smart Button for 5 seconds. 3 Hold down the desired button on the remote. 4 Release the Smart Button. 5 Follow the remote’s instructions to complete the pairing process. Activating the Genie Pro98 Opener’s Learning Button
Before pairing your Chamberlain remote, you must activate the learning button on your Genie Pro98 opener. This process ensures that the opener is ready to receive and store new remote control codes.
Here are the detailed steps to activate the learning button:
- Locate the learning button on the Genie Pro98 opener. It is typically a small, recessed button located on the front or side of the opener unit.
- Gather a ladder or step stool if you need to reach the learning button.
- Press and hold the learning button for 6 seconds. You should hear a series of beeps indicating that the opener is in learning mode.
- Within 30 seconds, press the desired button on the Chamberlain remote control that you want to program.
- Hold the remote control button for 2 seconds or until you hear a final beep from the opener. This confirms that the remote control code has been successfully stored in the opener.
- Repeat steps 4-5 for any additional Chamberlain remote controls you need to program. The opener can store up to 10 different remote control codes.
Tip: If you encounter any issues during the programming process, refer to the detailed instructions provided in the user manual for your specific opener model.
Pairing the Chamberlain Remote with the Genie Pro98 Opener
**1. Verify Compatibility:**
Ensure that your Chamberlain remote is compatible with the Genie Pro98 opener. Refer to the compatibility list provided by both manufacturers.
**2. Clear Existing Codes:**
Press and hold the “Learn” button on the opener for 6 seconds, then release to clear any previously stored codes.
**3. Locate the Smart Button:**
The Smart Button is usually located on the motor head or near the antenna of the opener. It may be labeled “Learn” or “Program.”
**4. Press the Smart Button:**
Press and release the Smart Button once. The LED indicator light should start flashing.
**5. Press and Hold the Remote Button:**
Hold down the desired button on your Chamberlain remote for 2-3 seconds. The LED light on the remote should blink.
**6. Release the Remote Button:**
Once the LED light on the remote stops blinking, release the button. The code has been successfully programmed.
**7. Test and Verify:**
Press the programmed button on your Chamberlain remote to test its functionality. If the door operates correctly, the code has been successfully paired. If not, repeat the steps or contact the manufacturer for assistance.
Step Action 1 Clear existing codes 2 Locate the Smart Button 3 Press the Smart Button 4 Press and hold the remote button 5 Release the remote button 6 Test and Verify Verifying Successful Reprogramming
Once you have completed the reprogramming process, it’s important to verify that it was successful. To do this, follow these steps:
1. Test the Remote
Press the button on the Chamberlain remote that you programmed to control the Genie Pro99. If the garage door opens or closes as expected, the reprogramming was successful.
2. Check the LED Light
Look at the LED light on the Genie Pro99 receiver. If the light is flashing green, it indicates that the remote is successfully programmed to the receiver.
3. Erase Previous Codes
To ensure that no previous codes are interfering with the new programming, erase all existing codes from the Genie Pro99 receiver. Refer to the receiver’s user manual for specific instructions on how to do this.
4. Reprogram the Remote Again
If the remote is not working after you have verified the LED light, try reprogramming the remote again. This will ensure that any potential errors in the previous programming were corrected.
5. Use a Different Button
If the button you programmed is not working, try programming a different button on the Chamberlain remote. This will help determine if the issue is with the button itself or the receiver.
6. Check for Interference
Make sure that there are no other devices or objects in close proximity to the garage door or receiver that could be causing interference. This includes other garage door openers, fluorescent lights, or metal objects.
7. Reset the Receiver
If you are still experiencing issues, try resetting the Genie Pro99 receiver. Refer to the receiver’s user manual for specific instructions on how to do this.
8. Troubleshooting Table
If you are unable to successfully reprogram the Chamberlain remote, refer to the following troubleshooting table for possible causes and solutions.
Issue Solution Remote does not light up Replace the batteries in the remote. LED light on receiver does not flash Ensure that the receiver is powered on and connected properly. Remote works intermittently Check for interference and move the receiver or remote away from potential sources. Remote has stopped working Try erasing all codes and reprogramming the remote. If this does not work, contact Chamberlain support. Troubleshooting Common Reprogramming Issues
While reprogramming Chamberlain remotes with Genie Pro98, you may encounter certain issues. Here are the most common ones and their solutions:
1. Remote not responding
* Ensure the batteries are fresh and properly installed.
* Clean the remote’s buttons to remove any dirt or debris.
* Check for obstructions in the remote’s path to the receiver.2. Door opener not moving
* Verify that the door opener is powered and connected to a power outlet.
* Check if the travel limits are set correctly.
* Inspect for any obstructions or debris in the door’s path.3. Remote programming only works occasionally
* Hold the remote closer to the receiver for a stronger signal.
* Replace the receiver’s antenna if it is damaged or weak.
* Ensure there are no signal interferences from other devices.4. Remote buttons not working properly
* Check if the remote is programmed correctly.
* Clean the buttons or replace the keypad if damaged.
* Reset the remote to its factory settings.5. Door opener only opens partially
* Adjust the travel limits and force settings on the door opener.
* Inspect the door tracks and rollers for binding or obstruction.
* Check for loose or damaged springs on the door system.6. Remote controls multiple door openers
* Ensure that each door opener has a unique code.
* Reprogram the remotes individually to specific door openers.
* Consider using Chamberlain’s Smart Garage Hub for centralized control.7. Door opener operates erratically
* Check for any loose or damaged wires in the door opener system.
* Inspect the logic board and sensors for any signs of damage or malfunction.
* Reset the door opener to its factory settings.8. Remote range is limited
* Install a new battery in the remote.
* Clean the receiver’s antenna and the remote’s buttons.
* Move the receiver closer to the door opener.9. Remote reprogramming unsuccessful after multiple attempts
* Consult Chamberlain’s online FAQs or user manual for specific error codes.
* Check if the remote is compatible with the Genie Pro98 opener.
* Contact Chamberlain customer support for personalized assistance.Reprogramming Older Chamberlain Remotes with Genie Pro98
For older Chamberlain remotes, the Genie Pro98 opener can be used for reprogramming. Here’s a detailed guide.
1. Compatibility Verification
Ensure that your Chamberlain remote is compatible with the Genie Pro98 opener. Check the user manual or seek professional assistance.
2. Reset the Chamberlain Remote
Press and hold the two outer buttons (typically A and B) simultaneously for 10 seconds. Release once the LED flashes.
3. Access Programming Mode on Genie Pro98
Hold the remote close to the opener’s motor unit and press the “Set” button. Then, press and hold the desired remote button.
4. Programming New Code
Once the LED starts flashing, release the remote button. Press and hold the desired remote button again to program the new code.
5. Verify Function
Release the remote button and press it again to test its functionality. If the opener operates, the reprogramming is successful.
Alternative Reprogramming Methods for Older Chamberlain Remotes
Manual Reprogramming
Locate the “Learn” button on the opener’s motor unit and press it using a pencil. Within 30 seconds, press and hold the desired remote button until the LED flashes. Release the button and press it again to finalize the programming.
Reprogramming with Smart Devices
Some Chamberlain remotes can be reprogrammed using compatible smart devices. Connect the device to the opener’s Wi-Fi network and follow the app’s instructions for remote reprogramming.
Professional Assistance
If self-reprogramming proves challenging, consider seeking professional assistance from an electrician or garage door technician.
Method Difficulty Tools Required Genie Pro98 Moderate Genie Pro98 opener, remote Manual Easy Pencil, remote Smart Device Varies Smart device, Wi-Fi network Professional Easy Electrician or technician How to Reprogram Chamberlain Remote with Older Genie Pro98
The Chamberlain remote can be reprogrammed to work with an older Genie Pro98 garage door opener. The process is simple and takes only a few minutes. Here are the steps on how to do it:
- Press and hold the “Learn” button on the Genie Pro98 for 2 seconds. The LED light will start to flash.
- Press and hold the button on the Chamberlain remote that you want to program. The LED light on the Genie Pro98 will stop flashing and stay lit.
- Release both buttons.
- Test the remote by pressing the button. The garage door should open or close.
People Also Ask
How do I know if my Genie Pro98 is compatible with a Chamberlain remote?
Most Chamberlain remotes are compatible with the Genie Pro98. However, there are some exceptions. To check if your remote is compatible, consult the Genie Pro98 user manual.
What do I do if I lose the original Chamberlain remote for my Genie Pro98?
If you lose the original Chamberlain remote, you can purchase a replacement remote from Chamberlain or from a home improvement store. The replacement remote will need to be programmed to work with your Genie Pro98.
Can I program multiple Chamberlain remotes to work with my Genie Pro98?
Yes, you can program multiple Chamberlain remotes to work with your Genie Pro98. The process is the same for each remote.
**Note:** If the LED light does not flash after 10 seconds, repeat steps 1-2.
Clearing the Chamberlain Remote’s Memory
4. Re-Program the Genie Pro98 with the Chamberlain Remote
a) Press and hold the “Program” button on the Genie Pro98 for 3 seconds until the blue LED flashes.
b) Within 30 seconds, press and hold the button you want to program on the Chamberlain remote. Continue holding the button until the Pro98’s blue LED stops flashing and remains illuminated.
c) If the programming is successful, the Pro98’s LED will flash twice. Repeat this process for any additional Chamberlain remotes you want to use.
d) To verify the programming, press the button on the Chamberlain remote. If the Pro98 responds by activating the garage door opener, the programming is complete.
| Chamberlain Remote Button | Genie Pro98 Button |
|---|---|
| Lock Button | Yellow Button |
| Unlock Button | Yellow Button |
| Trunk Release Button | Blue Button |
| Panic Button | Red Button |
Entering Chamberlain Remote Reprogramming Mode
To enter the Chamberlain remote reprogramming mode, follow these steps:
