Step into the realm of kitchen appliance maintenance with this comprehensive guide on removing the Whirlpool range/stove/oven glass main top. Whether you’re tackling a cleaning endeavor or replacing a damaged component, this detailed tutorial will empower you to navigate the process with confidence. Join us as we delve into the intricacies of this household appliance, ensuring that your culinary adventures remain uninterrupted.
Before embarking on this task, it’s essential to gather the necessary tools and prepare the work area. You’ll need a few basic items, including a Phillips head screwdriver, a putty knife, and a clean rag. Ensure adequate lighting in the designated workspace to facilitate precise handling and prevent any mishaps. Disconnect the appliance from the power source for safety reasons.
With the preparatory steps complete, let’s begin the disassembly process. Locate the screws securing the glass main top to the range/stove/oven body. Using your Phillips head screwdriver, carefully remove these screws. Gently lift the glass main top upward, supporting it with one hand while simultaneously sliding the putty knife along the edges to detach any stubborn adhesive residue. Once the glass main top is free, place it on a cushioned surface to prevent scratches or damage.
Disconnecting Utilities
Before beginning any work on your Whirlpool range, stove, or oven, it is crucial to disconnect all utilities to ensure safety.
### Gas Utilities
|
Turn Off Gas Supply |
Steps |
|---|---|
|
Locate the gas shut-off valve. |
Typically found near the appliance or on the main gas line. |
|
Turn the valve clockwise. |
Fully close the valve to stop gas flow. |
|
Check for any gas odor. |
If an odor persists, ventilate the area immediately and call a qualified gas technician. |
### Electrical Utilities
Turn off the electrical breaker or fuse that supplies power to the appliance at your home’s electrical panel. This will cut off all electrical current to the range, stove, or oven.
### Water Utilities (For Ovens with Self-Cleaning Options)
If your oven has a self-cleaning option, it will utilize water during the cleaning cycle. Before disconnecting the oven, shut off the water supply by turning the valve clockwise at the water inlet behind the appliance.
Removing Knobs and Control Panel
Begin by removing the knobs from the control panel. Each knob is usually secured by a small screw located in the center. Use a screwdriver to remove the screws and then pull the knobs straight off.
Next, locate the screws that secure the control panel to the range. These screws are typically found around the perimeter of the control panel. Remove the screws and carefully lift the control panel up and away from the range.
In some cases, the control panel may be connected to the range by a ribbon cable. If this is the case, carefully disconnect the ribbon cable before removing the control panel completely.
| Model | Screw Location for Knobs |
|---|---|
| Whirlpool WFE320M0JS | Center of knob, use a 1/4-inch nut driver |
| Whirlpool WEG745H0FS | Center of knob, use a Phillips screwdriver |
| Whirlpool WFG320M0BS | Bottom of knob, use a Phillips screwdriver |
Unbolting the Range
Unbolting the range is a crucial step in removing the glass cooktop. Before you begin, ensure that the range is cool and disconnected from the power source.
Materials You’ll Need:
| Tool | Quantity |
|---|---|
| Phillips screwdriver | 1 |
| Flathead screwdriver | 1 |
| Adjustable wrench | 1 |
Note: The exact tools required may vary depending on the specific range model.
Steps:
- Locate the Stabilizer Bars: Inspect the underside of the range and locate the two stabilizing bars that support the range between the cabinets.
- Remove the Bolts: Using the adjustable wrench, carefully loosen and remove the bolts that secure the stabilizing bars to the range.
- Disconnect the Gas Line (if applicable): If your range uses gas, you will need to disconnect the gas line. To do this, use a flathead screwdriver to turn off the gas valve behind the range. Then, use an adjustable wrench to disconnect the gas line from the range. Be cautious and ensure that the valve is completely closed before proceeding.
Pulling Out the Range
Before beginning, turn off the power to the range at the circuit breaker or fuse box. Disconnect the gas supply if you have a gas range.
1. Open the oven door.
2. Locate the two screws at the bottom of the oven door frame.
3. Remove the screws and pull the bottom of the oven door towards you to detach it.
4. Locate the two or four screws that secure the top of the range to the countertop. They are typically located at the front or back of the range, just below the countertop.
Use a screwdriver or socket wrench to remove the screws. Once the screws are removed, carefully lift the range up and away from the countertop, being careful not to damage the floor or cabinetry. It may be helpful to have a second person assist you with this step.
5. Pull the range out from the wall.
6. Disconnect the electrical wiring.
7. If you have a gas range, disconnect the gas line.
Disconnecting the Power Cable
1. Locate the power cable: The power cable is typically located at the back of the range/stove/oven. It is a thick, black cable that is connected to a wall outlet.
2. Unplug the power cable: To unplug the power cable, simply grasp the plug and pull it straight out of the wall outlet. Do not pull on the cable itself.
3. Disconnect the power cable from the appliance: Once the power cable is unplugged from the wall outlet, you need to disconnect it from the appliance. To do this, locate the terminal block where the power cable is connected. The terminal block is typically located on the back of the appliance.
4. Loosen the terminal screws: To loosen the terminal screws, you will need a screwdriver. Insert the screwdriver into the screw and turn it counterclockwise until the screw is loose. Do not remove the screws completely.
5. Disconnect the power cable from the terminal block: Once the terminal screws are loose, you can disconnect the power cable from the terminal block. To do this, simply pull the power cable straight out of the terminal block.
Note: If you are having trouble disconnecting the power cable, you can refer to the appliance’s user manual for more detailed instructions.
Accessing the Oven Glass
1. **Unplug the Range:** Before starting, ensure the range is disconnected from the power supply for safety.
2. **Open the Oven Door:** Pull the door open all the way to provide access to the oven’s interior.
3. **Locate the Screws:** On the top of the doorframe, identify the screws holding the glass panel in place. Typically, there are two screws on each side.
4. **Remove the Screws:** Using a screwdriver, carefully remove all four screws.
5. **Locate the Retainers:** Once the screws are out, grasp the glass panel by its top corners and gently lift it off the oven door. Be cautious, as the glass can be heavy and sharp.
6. **Lift and Disconnect the Glass:** With the glass panel lifted, gently pull it towards you and slightly upwards until it disconnects from the frame. If the glass is stuck, use a soft cloth to protect your hands and gradually work it free. Take your time and apply gentle pressure to avoid breaking the glass.
| Step | Description |
|---|---|
| 1 | Remove the oven door |
| 2 | Locate the screws holding the glass in place |
| 3 | Remove the screws and carefully lift the glass out |
| 4 | Pull the glass towards you and slightly upwards until it disconnects |
Removing the Oven Glass
To remove the oven glass from a Whirlpool appliance, the following steps should be taken:
1. Safety First
Before beginning any work, ensure that the appliance is unplugged from its power source and has completely cooled down to prevent burns or electrical shock.
2. Locate the Screws
Find the screws along the top and bottom of the glass and remove them using the appropriate screwdriver.
3. Lift the Glass Gently
Carefully grasp the glass from the top and lift it upwards, being mindful not to touch the inner surface.
4. Disconnect the Wires
There may be wires attached to the glass. If so, carefully disconnect them from the terminals.
5. Clean the Frame and Glass
Use a damp cloth to clean the glass and the frame where it was located to remove any debris.
6. Reassemble the Glass
Place the glass back into the frame, ensuring a snug fit.
7. Secure the Screws
Tighten the screws at the top and bottom of the glass securely to hold it in place. Begin by hand-tightening and then use the screwdriver to fully secure them. Tightening the screws too much can crack the glass, so proceed with caution. Refer to the manufacturer’s instructions for the recommended torque setting. It’s crucial to ensure the screws are tightened evenly to prevent warping or damage.
Cleaning the Oven Glass
Cleaning the oven glass is an important part of maintaining your oven. A dirty oven glass can make it difficult to see what is cooking inside, and it can also make your oven less efficient. There are a few different ways to clean oven glass, but the most effective method is to use a commercial oven cleaner. However, if you do not have any commercial oven cleaner on hand, there are a few other methods you can try
Steam Cleaning
Steam cleaning is a great way to clean oven glass without using any harsh chemicals. To steam clean your oven glass, simply place a heat-resistant bowl filled with water in the oven and turn the oven on to the highest setting. Let the oven heat up for about 30 minutes, or until the water has evaporated. Once the oven has cooled, use a sponge or cloth to wipe away the loosened dirt and grime.
Baking Soda Paste
A baking soda paste is another effective way to clean oven glass. To make a baking soda paste, mix equal parts baking soda and water in a bowl. Apply the paste to the oven glass and let it sit for at least 30 minutes. Once the paste has dried, use a sponge or cloth to wipe away the loosened dirt and grime.
Vinegar and Water Solution
A vinegar and water solution is a natural way to clean oven glass without using any harsh chemicals. To make a vinegar and water solution, mix equal parts vinegar and water in a bowl. Apply the solution to the oven glass and let it sit for at least 15 minutes. Once the solution has dried, use a sponge or cloth to wipe away the loosened dirt and grime.
Other Oven Glass Cleaning Methods
There are a few other methods you can try to clean oven glass, including:
| Method | Instructions |
|---|---|
| Ammonia | Mix 1/2 cup of ammonia with 1 gallon of water. Apply the solution to the oven glass and let it sit for at least 30 minutes. Once the solution has dried, use a sponge or cloth to wipe away the loosened dirt and grime. |
| Commercial oven cleaner | Follow the instructions on the oven cleaner label. |
| Dish soap | Mix a few drops of dish soap with water in a bowl. Apply the solution to the oven glass and let it sit for at least 10 minutes. Once the solution has dried, use a sponge or cloth to wipe away the loosened dirt and grime. |
Reattaching the Oven Glass
Once the oven door is disassembled and the glass is cleaned, it’s time to reattach the oven glass.
Align the oven glass with the oven door frame. Ensure that the edges of the glass are evenly spaced within the frame.
Replace the metal brackets or screws that hold the oven glass in place. Tighten them securely, but do not overtighten.
Reattaching the Door Springs
If your oven door has springs, it’s crucial to reattach them correctly. Locate the holes on the oven door frame where the springs were originally connected.
Insert one end of each spring into the designated hole.
Hook the other end of the springs onto the brackets or hooks on the oven body.
Ensure that the springs are correctly aligned and have sufficient tension to properly open and close the oven door.
Make any necessary adjustments to the springs to ensure smooth operation of the oven door.
Reattaching the Door Trim
Finally, reattach the door trim to the oven door frame. The trim consists of the outer and inner panels that cover the oven door edges.
Align the door trim with the oven door frame.
Secure the trim in place using screws or clips.
Check that the door trim is securely fastened and does not interfere with the opening and closing of the oven door.
Reinstalling the Range
To put the range back in place, the steps are as follows:
1. Insert the range. Slide the range back into the cabinet opening. Make sure that the feet are resting on the floor and the back of the range is against the wall.
2. Reconnect the range. Connect the power cord to the outlet. If you disconnected the gas supply, turn it back on.
3. Test the range. Turn on the range and make sure that it is working properly.
Putting the Main Glass Top back on the Range:
1. Lower the glass cooktop into the range opening.
2. Make sure that the glass cooktop is centered in the opening.
3. Lower the clips or clamps into place to secure the glass cooktop to the range.
4. Turn the screws to tighten the clips or clamps.
5. Reconnect the electrical wires to the glass cooktop.
6. Turn on the range and make sure that the glass cooktop is working properly.
| Tools Needed | Materials Needed |
|---|---|
| Phillips screwdriver | New glass cooktop |
| Flathead screwdriver | Screws |
| Needle-nose pliers | Clips or clamps |
| Electrical tape |
How To Take Off Whirlpool Range/Stove/Oven Glass Main Top
Whirlpool ranges, stoves, and ovens feature a glass main top that offers a sleek and modern aesthetic. While this glass top is durable, it may require occasional removal for cleaning or repairs. Here’s a step-by-step guide on how to take off the glass main top of your Whirlpool range/stove/oven:
Step 1: Safety First
Unplug the appliance from the power source and allow it to cool completely before attempting to remove the glass top.
Step 2: Remove the Screws
Locate the screws that secure the glass top to the range/stove/oven. They are typically found around the edges of the glass top.
Step 3: Lift the Glass Top
Once the screws are removed, carefully lift the glass top straight up and away from the appliance. Avoid tilting or twisting the glass top, as this could damage it.
Step 4: Clean the Glass Top
With the glass top detached, you can clean it thoroughly using a glass cleaner or a mild detergent solution. Avoid using abrasive cleaners or sponges, as they can scratch the glass surface.
Step 5: Reinstall the Glass Top
Place the glass top back onto the appliance, aligning it with the screws.
Step 6: Tighten the Screws
Tighten the screws securely, but do not overtighten them. The glass top should be firmly secured to the appliance.
Step 7: Reconnect Power
Once the glass top is reinstalled, plug the appliance back into the power source.
People Also Ask About How To Take Off Whirlpool Range/Stove/Oven Glass Main Top
How do I remove the glass top of my Whirlpool electric stove?
Follow the steps outlined in the main guide above for removing the glass top of your Whirlpool electric stove.
Do I need to remove the glass top of my Whirlpool oven to clean it?
While it is not necessary to remove the glass top to clean your Whirlpool oven, it can be helpful for a more thorough cleaning. Refer to your oven’s user manual for specific cleaning instructions.
Can I use a razor blade to remove baked-on food from the glass top?
No, do not use a razor blade or other sharp objects to clean the glass top, as this can damage the surface. Use a glass cleaner or a mild detergent solution instead.
