Wondering how to turn off the ice maker on your Frigidaire Gallery refrigerator? This guide will provide you with step-by-step instructions on how to disable the ice maker, whether it’s a built-in model or a portable unit. Additionally, we’ll cover troubleshooting tips in case you encounter any issues during the process.
Firstly, it’s crucial to identify the location of the ice maker. In most Frigidaire Gallery refrigerators, the ice maker is situated in the freezer compartment. Once you’ve located the ice maker, you’ll need to identify the power switch. The switch may be located on the side or back of the ice maker, or it may be a lever that you need to flip. Once you’ve found the power switch, simply turn it off to disable the ice maker.
Next, let’s delve into troubleshooting. If you’ve turned off the power switch but the ice maker is still running, there may be an underlying issue. One possibility is that the ice maker’s water line is frozen. To resolve this, you’ll need to thaw the water line by pouring warm water over it. Once the water line is thawed, the ice maker should stop running. Additionally, if the ice maker isn’t producing any ice, you may need to clean it. To clean the ice maker, simply remove the ice bin and wipe down the interior with a clean cloth.
Shutting Off the Water Supply Valve
Before beginning any work on your Frigidaire Gallery refrigerator’s icemaker, it is imperative to shut off the water supply. This will prevent any water from leaking or causing damage during the process.
To shut off the water supply, locate the water supply valve behind the refrigerator. It is usually a small, quarter-turn valve. Turn the valve clockwise until it is completely shut off.
If you are unsure where the water supply valve is located, consult your refrigerator’s owner’s manual for assistance. Once the water supply is shut off, you can proceed with the next step of turning off the icemaker.
Here is a more detailed explanation of the steps involved in shutting off the water supply valve:
| Step | Action |
|---|---|
| 1 | Locate the water supply valve behind the refrigerator. |
| 2 | Turn the valve clockwise until it is completely shut off. |
| 3 | Check to make sure that the water supply is off by turning on the nearest faucet. If no water comes out, the water supply is off. |
Disconnecting the Wire Harness
Once you have located the icemaker, you will need to disconnect the wire harness. This is a delicate part of the process, so be careful not to damage any of the wires.
To disconnect the wire harness, follow these steps:
- Locate the wire harness connector on the back of the icemaker.
- Use a flat-head screwdriver or your fingers to gently pry the connector apart.
- Once the connector is apart, pull the wire harness away from the icemaker.
- Be careful not to damage the wires as you pull them away.
- Once the wire harness is disconnected, you can remove the icemaker from the freezer.
Here is a table summarizing the steps for disconnecting the wire harness:
| Step | Action |
|---|---|
| 1 | Locate the wire harness connector on the back of the icemaker. |
| 2 | Use a flat-head screwdriver or your fingers to gently pry the connector apart. |
| 3 | Once the connector is apart, pull the wire harness away from the icemaker. |
| 4 | Be careful not to damage the wires as you pull them away. |
| 5 | Once the wire harness is disconnected, you can remove the icemaker from the freezer. |
Reinstalling the Icemaker
To reinstall the icemaker, follow these steps:
1.
Lower the wire bail arm to release the icemaker.
2.
Pull the icemaker straight out to disconnect it from the water supply line.
3.
Remove the two screws that secure the icemaker to the freezer wall.
4.
Lift the icemaker up and away from the freezer wall.
5.
Remove the water filter from the icemaker.
6.
Clean the water filter housing.
7.
Replace the water filter.
8.
Align the icemaker with the freezer wall and insert the two screws.
9.
Push the icemaker straight back into the freezer until it clicks into place.
| Icemaker Model | Bail Arm Location | Water Supply Connection |
|---|---|---|
| Gallery | Right side of icemaker | Right side of icemaker with quick coupler |
| Professional | Bottom of icemaker | Back of icemaker with quick coupler |
10.
Raise the wire bail arm to lock the icemaker into place.
How To Turn Off Icemaker On Frigidaire Gallery Refrigerator
If you need to turn off the icemaker on your Frigidaire Gallery refrigerator, there are several different ways to do so.
One way is to turn off the icemaker at the control panel. To do this, locate the icemaker button on the control panel and press it. The icemaker will turn off and the light next to the button will turn off.
Another way to turn off the icemaker is to turn off the water supply to the icemaker. To do this, locate the water inlet valve behind the refrigerator. Turn the valve clockwise to turn off the water supply.
Finally, you can also turn off the icemaker by unplugging the refrigerator. This will stop all power to the refrigerator, including the icemaker.
People Also Ask About How To Turn Off Icemaker On Frigidaire Gallery Refrigerator
How do I reset the icemaker on my Frigidaire Gallery refrigerator?
To reset the icemaker on your Frigidaire Gallery refrigerator, follow these steps:
- Turn off the icemaker at the control panel.
- Unplug the refrigerator for 5 minutes.
- Plug the refrigerator back in.
- Turn on the icemaker at the control panel.
Why is my Frigidaire Gallery refrigerator not making ice?
There are several reasons why your Frigidaire Gallery refrigerator may not be making ice. Some of the most common reasons include:
- The icemaker is turned off.
- The water supply to the icemaker is turned off.
- The icemaker is frozen.
- The icemaker is not working properly.
How do I clean the icemaker on my Frigidaire Gallery refrigerator?
To clean the icemaker on your Frigidaire Gallery refrigerator, follow these steps:
- Turn off the icemaker at the control panel.
- Unplug the refrigerator.
- Remove the ice bin.
- Clean the ice bin with warm, soapy water.
- Clean the icemaker with a mixture of white vinegar and water.
- Rinse the icemaker with clean water.
- Dry the icemaker with a clean towel.
- Reinstall the ice bin.
- Plug the refrigerator back in.
- Turn on the icemaker at the control panel.
