Have you ever been in a situation where you accidentally silenced your phone and then couldn’t figure out how to turn the ringer back on? If so, you’re not alone. Many people have experienced this frustrating problem. The good news is that it’s actually quite simple to turn your ringer back on. In this article, we’ll provide you with step-by-step instructions on how to do it, whether you have an iPhone or an Android phone.

First, let’s take a look at how to turn the ringer back on on an iPhone. If you have an iPhone, the first thing you need to do is open the Settings app. Once you’re in the Settings app, tap on the “Sounds & Haptics” option. On the “Sounds & Haptics” screen, you’ll see a slider labeled “Ringer Volume.” Make sure that the slider is turned up all the way. If the slider is turned down, your ringer will be silenced. Once you’ve turned up the ringer volume, your phone will start ringing again when you receive a call.

Now, let’s take a look at how to turn the ringer back on on an Android phone. If you have an Android phone, the steps may vary slightly depending on the make and model of your phone. However, the general steps are the same. First, you need to open the Settings app. Once you’re in the Settings app, tap on the “Sound” option. On the “Sound” screen, you’ll see a slider labeled “Ringer Volume.” Make sure that the slider is turned up all the way. If the slider is turned down, your ringer will be silenced. Once you’ve turned up the ringer volume, your phone will start ringing again when you receive a call.

Identifying the Ringer Switch

Most smartphones and tablets have a dedicated physical ringer switch. It is typically located on the side of the device, often near the volume buttons. The switch may be a small slider or a toggle button. It is labeled with a ringer or bell icon.

To identify the ringer switch, look for the following characteristics:

Shape and Size

Ringer switches are typically small and rectangular. They may be slightly raised or flush with the device’s surface.

Location

Ringer switches are usually located on the side of the device, near the volume buttons or power button. They may be placed towards the top or bottom of the side.

Label

Ringer switches are labeled with a ringer or bell icon. This icon may be engraved into the switch or printed on it. The label may indicate the different ringer modes (e.g., silent, vibrate, loud).

Movement

Ringer switches move when they are activated. They may slide or toggle in one or two directions. The movement will correspond to the different ringer modes.

If you cannot find the ringer switch on your device, consult the device’s user manual or contact the manufacturer for assistance.

Device	Ringer Switch Location
iPhone	Right side, above the volume buttons
Samsung Galaxy	Left side, above the volume buttons
Google Pixel	Right side, below the power button
iPad	Right side, above the volume buttons

Locating the Volume Rocker

The volume rocker is typically located on the side of your phone. On most Android phones, it is on the right side, while on iPhones, it is on the left side. The volume rocker consists of two buttons: one for increasing the volume and one for decreasing it.

To locate the volume rocker, follow these steps:

Hold your phone in your hand with the screen facing you.
Feel along the sides of the phone for two small, raised buttons.
These buttons are the volume rocker.

Once you have located the volume rocker, you can use it to adjust the volume of your phone’s ringer.

Tips for Finding the Volume Rocker

Device	Volume Rocker Location
iPhone	Left side
Android Phone	Right side
Samsung Galaxy S22	Right side
Google Pixel 6	Right side
OnePlus 10 Pro	Right side

If you are having trouble finding the volume rocker on your phone, consult your phone’s user manual or search online for specific instructions for your model.

Adjusting the Ringer Volume

Adjusting the ringer volume is an essential step in customizing your phone’s settings to suit your preferences. Here’s a detailed guide on how to do it:

Using Volume Keys

The quickest way to adjust the ringer volume is via the physical volume keys located on the side of your phone. Simply press the volume up or down keys to increase or decrease the volume, respectively. This method is convenient, especially when you need to make quick adjustments on the go.

Accessing Ringer Volume Settings

For more control over the ringer volume, you can access the ringer volume settings within your phone’s Settings app. Here’s how:

Go to your phone’s Settings app.
Navigate to the “Sound & Vibration” or “Sound” section.
Locate the “Ringer Volume” slider and adjust it to your desired level.

Customizing Ringer Volume for Different Modes

Most smartphones allow you to customize the ringer volume for different sound modes, such as “Silent,” “Vibrate,” or “Ring.” This feature lets you set specific volume levels for different scenarios, such as when you’re in a meeting or when you want to be notified of incoming calls even in noisy environments.

Sound Mode	Ringer Volume Adjustment
Silent	Ringer volume is turned off.
Vibrate	Ringer volume is set to vibrate only.
Ring	Ringer volume can be adjusted using the volume keys or settings.

To customize the ringer volume for different sound modes:

Go to your phone’s Settings app.
Navigate to the “Sound & Vibration” or “Sound” section.
Tap on the sound mode you want to customize.
Adjust the “Ringer Volume” slider to your desired level.

Using the Ringer Control in Device Settings

This method is available on most Android devices. Here are the steps:

1. Open the Settings app.

2. Locate the “Sound” or “Audio” settings.

3. Look for the “Ringer volume” or “Ringer” slider.

4. Drag the slider to the desired level.

Some devices may have additional settings related to the ringer, such as:

Setting	Description
Vibrate on silent	The phone will vibrate even when the ringer is turned off.
Do Not Disturb mode	Silences all notifications and calls, except for those from specified contacts or apps.
Volume normalization	Keeps the volume of all audio sources at a similar level, including the ringer.

Enabling/Disabling Ringer via Quick Settings

This method is convenient if you want to quickly toggle the ringer on or off without having to go through the Settings menu. Here’s how it works:

Swipe down from the top of the screen to open the Quick Settings panel.
Locate the “Sound” or “Volume” icon, which typically looks like a bell or speaker.
Tap on the icon to toggle between the following modes:

Mode	Description
Mute	Disables all sound and vibration
Vibrate	Enables vibration but disables sound
Sound	Enables both sound and vibration

If you want to customize the volume levels for different types of notifications, tap on the “Settings” icon (gear) next to the Sound icon.
In the Sound settings, you can adjust the volume for ringtones, notifications, media, and alarms.

How To Turn Ringer On

Force-Enabling Ringer on Android Devices

If the usual steps don’t resolve the issue, you can try force-enabling the ringer using ADB (Android Debug Bridge) commands. Follow these steps:

Enable USB debugging on your Android device.
Download and install ADB on your computer.
Connect your Android device to your computer using a USB cable.
Open a command prompt or terminal window on your computer.
Navigate to the ADB installation directory on your computer.
Execute the following command to check if your device is connected:

ADB Command Description

adb devices Lists connected Android devices
If your device is listed, execute the following command to force-enable the ringer:

ADB Command Description

adb shell settings put global volume_notification 7 Sets the notification volume to maximum
Restart your Android device to apply the changes.

ADB Command	Description
adb devices	Lists connected Android devices

ADB Command	Description
adb shell settings put global volume_notification 7	Sets the notification volume to maximum

Switching Off the Ringer

This method is designed to disable both the ringer and vibration modes completely.

Locate the volume buttons on the side of the phone.
Press and hold the “Volume Down” button until the ringer icon appears crossed out on the screen.
Alternatively, you can also access the sound settings menu by going to “Settings” > “Sound.”
Under the “Ringer Volume” section, adjust the slider to the lowest level or tap on the “Mute” button.
Ensure that the “Vibrate” switch is also turned off.
Your phone will now be in silent mode.
To turn the ringer back on, simply follow the same steps and adjust the volume or turn off the mute.

Switching to Vibrate Mode Only

This technique allows for notification vibrations while silencing the ringer.

Use the volume buttons to lower the ringer volume.
Once the ringer icon appears crossed out, continue holding the “Volume Down” button.
This will activate vibrate mode, indicated by a vibration icon on the screen.
Alternatively, you can access the sound settings menu and adjust the “Vibrate” switch to “On.”
The phone will now vibrate for incoming calls and notifications but will not produce any sound.
To switch back to ringer mode, press the volume buttons or turn off the vibrate option in the sound settings.
The table below summarizes the button sequences for different modes:

Mode	Button Sequence
Silent Mode	Hold “Volume Down” until ringer icon is crossed out
Vibrate Mode	Hold “Volume Down” after ringer icon is crossed out
Ringer Mode	Press Volume Up

Customizing Ringer Settings

Once you’ve enabled your ringer, you can customize it to your liking. Here’s how:

Volume

Adjust the ringer volume by pressing the volume up or down buttons on the side of your phone. You can also use the volume slider in the Settings app under “Sound & vibration”.

Ringtone

Choose a custom ringtone by going to Settings > Sound & vibration > Ringtone. You can choose from a variety of pre-installed ringtones or download new ones from the Google Play Store.

Vibration

Enable or disable vibration when your phone rings by going to Settings > Sound & vibration > Vibration. You can also adjust the vibration intensity.

Silent Mode

Quickly silence your ringer by switching to silent mode. To do this, press the volume down button until your phone vibrates and the “Silent” icon appears in the status bar.

Exceptions

Create exceptions for certain contacts or apps to override the ringer settings. For example, you can set your phone to ring for important contacts even when it’s in silent mode.

Ringer Preference

Choose your preferred ringer behavior from the following options in the Settings app:

Always ring
Ring only when connected to Wi-Fi
Ring only when the screen is off
Never ring

Ringer Scheduler

Schedule your ringer to automatically turn on or off at specific times. To do this, go to Settings > Sound & vibration > Do Not Disturb > Scheduled rules.

Customizing Ringtone for Specific Contacts

Assign unique ringtones to specific contacts for easy identification. Here’s how:

1. Open your Contacts app.

2. Select the contact you want to customize.

3. Tap “Edit” and then “Set ringtone”.

4. Choose a ringtone from the available options.

Setting	Description
Volume	Adjust the loudness of the ringer.
Ringtone	Choose the sound that plays when your phone rings.
Vibration	Turn on or off the vibration when the phone rings.
Silent Mode	Temporarily mute the ringer.
Exceptions	Allow certain contacts or apps to override ringer settings.
Ringer Preference	Set the default behavior of the ringer (always on, on Wi-Fi, etc.).
Ringer Scheduler	Schedule the ringer to turn on or off at specific times.

Troubleshooting Ringer Issues

Ringer Not Working

– Check if your device is on silent mode.
– Ensure that the volume is turned up high enough.
– Restart your device.
– Update your device to the latest software version.
– Contact your carrier or manufacturer for further assistance.

Ringer Volume Too Low

– Check the volume settings on your device.
– Clean any debris or dirt from the speaker grill.
– Use a hearing aid or headphones to amplify the sound.
– Consider getting your device repaired if necessary.

Ringer Intermittent

– Check for any loose connections or damaged wires.
– Make sure your device is securely seated in its charging dock or case.
– Try using a different ringer tone or sound profile.
– Contact your carrier or manufacturer for further support.

Ringer Only Works in Headphones

– Ensure that your headphones are properly connected.
– Clean the headphone jack on your device and headphones.
– Try using different headphones or earphones.
– Check if your device has a dedicated “Headphone Mode” setting and disable it.

Ringer Not Working After Water Damage

– Remove your device from the water immediately.
– Power off your device and do not turn it back on.
– Dry your device with a soft cloth or paper towels.
– Place your device in a sealed bag with silica gel packets.
– Allow your device to dry for several hours or overnight before attempting to power it on.
– Contact your carrier or manufacturer for professional assistance.

Ringer Only Works in Vibrate Mode

– Check if your device is set to “Vibrate Only” mode.
– Try restarting your device.
– Update your device to the latest software version.
– Contact your carrier or manufacturer for further troubleshooting.

Ringer Not Working with Specific Contacts

– Check if the specific contact has been assigned a custom ringtone or sound profile.
– Ensure that the volume is turned up for the individual contact.
– Delete and re-add the contact to your address book.

Ringer Not Working for Apps

– Check if the app’s notification settings are enabled.
– Make sure the app has permission to access your device’s sound settings.
– Update the app to the latest version.
– Contact the app developer for further support.

Ringer Not Working for Alarms

– Check if the alarm is set to vibrate only or silent mode.
– Ensure that the alarm volume is turned up loud enough.
– Try creating a new alarm with a different ringtone or sound.
– Contact your carrier or manufacturer for additional assistance.

Accessibility Features for Ringer Control

Individuals with hearing impairments or other accessibility needs can utilize a range of features to enhance their ability to manage ringer settings:

Vibration: Smartphones provide the option to enable vibration when the ringer is turned on, providing tactile feedback to alert users to incoming calls.
Flashing LED Lights: Many phones feature LED lights that flash when a call is received, offering a visual cue for those with hearing disabilities.
Assisted Listening: Bluetooth or wired assistive listening devices, such as hearing aids or cochlear implants, can be connected to smartphones to enhance sound amplification and clarity.
Ringer Volume Adjustment: Users can adjust the volume of the ringer to ensure it is audible enough for their needs.
Personalized Ringtone: Assigning a specific ringtone to important contacts can help users quickly identify incoming calls.
Call Screening: Some smartphones allow users to set up call screening features, which automatically send unknown callers to voicemail.
Notification Alerts: Users can enable notification alerts for missed calls to ensure they are aware of missed communications.
Closed Captioning: For deaf or hard-of-hearing individuals, closed captioning can be enabled during video calls to provide a text-based transcript of the conversation.
Teletypewriter (TTY)/Text Telephone (TT): These assistive devices allow individuals with hearing or speech disabilities to communicate via text messages or a dedicated telephone line.
Sign Language Interpretation: In some cases, sign language interpretation services can be requested for video calls to ensure accessibility for deaf individuals.