Get ready to revolutionize your home cleaning routine with the Swiffer WetJet, a game-changing tool that will leave your floors sparkling and streak-free. Say goodbye to the days of messy mopping and back-breaking scrubbing. With the WetJet, you can effortlessly glide across your floors, removing dirt, grime, and even stubborn pet hair in a matter of minutes. Its innovative design and easy-to-use features make it the perfect choice for busy individuals and families who value convenience and efficiency.
The Swiffer WetJet comes with pre-filled cleaning solution cartridges that eliminate the need for measuring and mixing cleaning liquids. Simply insert the cartridge into the mop and you’re ready to clean. The mop’s microfiber pads effectively trap dirt and debris, while the built-in spray nozzle evenly distributes the cleaning solution ahead of the mop, ensuring thorough and streak-free cleaning. Plus, the ergonomic handle and swivel steering provide maximum comfort and maneuverability, making it effortless to clean even under furniture and in tight corners.
Maintaining your Swiffer WetJet is a breeze. The reusable microfiber pads can be machine-washed up to 10 times, extending their lifespan and saving you money in the long run. The mop itself is also easy to clean, with a removable tank that allows you to dispose of the used cleaning solution and refill it with a fresh cartridge. Whether you’re cleaning a small apartment or a spacious home, the Swiffer WetJet offers a quick, effective, and convenient solution for keeping your floors spotless.
Assembling the Swiffer WetJet
1. Attach the Handle to the Base
– Remove the handle from the box and locate the two holes at the top of the base.
– Align the holes on the handle with the holes on the base, making sure the handle is facing the correct direction (the trigger should be on top).
– Push the handle down firmly onto the base until it clicks into place.
2. Insert the Battery
– Locate the battery compartment at the bottom of the handle.
– Open the battery compartment door.
– Insert the 4 AA batteries (not included) into the compartment, matching the positive and negative terminals correctly.
– Close the battery compartment door.
3. Add Cleaning Solution
– Remove the white cleaning solution tank from the back of the base.
– Fill the tank with the Swiffer WetJet cleaning solution up to the fill line.
– Replace the tank into the back of the base.
4. Attach the Cleaning Pad
– Remove the blue cleaning pad from its packaging.
– Peel off the protective strip on the back of the pad.
– Align the pad with the Velcro strip on the bottom of the base and press down firmly until it attaches.
Filling the Cleaning Solution Tank
To prepare your Swiffer WetJet for cleaning, you’ll need to fill the cleaning solution tank. Here’s how:
1. Open the tank cover.
Locate the latch on the top of the Swiffer WetJet and press it to release the tank cover. Lift the cover upward to open it.
2. Remove the cleaning solution cartridge and insert a new one.
Grip the cleaning solution cartridge located inside the tank and pull it straight up to remove it. Discard the used cartridge. Take a fresh cleaning solution cartridge and align it with the guides inside the tank. Push down firmly until it clicks into place.
3. Fill the tank with water.
Using a measuring cup or pitcher, fill the tank with warm water up to the indicated fill line. Avoid overfilling.
4. Close the tank cover.
Once the tank is filled, line up the grooves on the tank cover with those on the tank housing and press down to close the cover securely.
5. Connect the cleaning pad.
Attach a new Swiffer WetJet cleaning pad to the bottom of the cleaning head. Press down firmly until it snaps into place.
6. Verify the cleaning solution level.
Check the indicator light located on the side of the Swiffer WetJet to ensure the cleaning solution tank has sufficient liquid. The light should illuminate when the solution level is low.
Cleaning Solution Cartridge
| Type | Suitable for |
|---|---|
| Blue | Hardwood and laminate floors |
| Green | Tile and grout floors |
| Red | Stone floors |
Attaching the Cleaning Pad
Installing the cleaning pad on the Swiffer WetJet is a quick and easy process. Grasp the base of the pad with one hand and the head of the mop with the other. Line up the two parts and gently slide the pad onto the mop until it clicks into place. Ensure the pad is attached securely before using the mop to clean your floors.
Here are some additional tips to help you attach the cleaning pad correctly:
Selecting the Right Pad
Before attaching the cleaning pad, choose the appropriate pad for your cleaning needs. Swiffer offers several types of cleaning pads, including:
| Pad Type | Usage |
|---|---|
| Dry Sweeping | For quick cleanup of dry dirt and debris |
| Wet Mopping | For removing wet spills and cleaning hard floors |
| Heavy Duty | For tackling tough stains and cleaning high-traffic areas |
Select the pad that best meets your cleaning requirements to ensure optimal performance.
Positioning the Pad Correctly
When attaching the cleaning pad, be mindful of its orientation. The pad should be aligned with the mop head, with the cleaning surface facing the floor. Avoid attaching the pad upside down or backwards, as this will compromise its cleaning effectiveness.
Securing the Pad Firmly
Once the pad is positioned correctly, slide it onto the mop head until it clicks into place. Make sure the pad is attached securely by gently tugging on it. A properly attached pad will not come loose or move around while you mop.
Operating the Swiffer WetJet
Using the Swiffer WetJet is a quick and easy way to clean your floors. Here’s how to do it:
1. Attach the Cleaning Pad
Start by attaching the cleaning pad to the bottom of the WetJet. Make sure the pad is aligned correctly and securely fastened.
2. Fill the Reservoir
Open the reservoir cap and fill it with clean water. You can also add a bit of floor cleaner if desired. Close the cap tightly.
3. Insert the Battery
Locate the battery compartment on the back of the WetJet and insert the batteries. Make sure the batteries are properly aligned and installed securely.
4. Cleaning Your Floors
- Press the Trigger: To start cleaning, press the trigger on the handle. This will release the cleaning solution onto the floor.
- Glide the WetJet: Slowly glide the WetJet across the floor in a back-and-forth motion, applying even pressure.
- Overlapping Strokes: As you clean, slightly overlap your strokes to ensure the entire floor is covered.
- Avoid Oversaturation: Press the trigger as needed to release more cleaning solution. Avoid oversaturation, as this can leave streaks.
- Hands-Free Cleaning: For hands-free cleaning, unlock the trigger by pushing the button on the handle. The WetJet will continue to release cleaning solution as you glide it across the floor.
Cleaning Different Surfaces
The Swiffer Wetjet is a versatile cleaning tool that can be used on a variety of surfaces. Here are some tips for cleaning different surfaces with the Swiffer Wetjet:
Hardwood Floors
To clean hardwood floors with the Swiffer Wetjet, use the Hardwood Floor Cleaner solution. This solution is designed to clean and protect hardwood floors without damaging them. Be sure to wring out the mop pad well before mopping the floor to avoid leaving streaks.
Tile Floors
To clean tile floors with the Swiffer Wetjet, use the Tile Floor Cleaner solution. This solution is designed to clean and disinfect tile floors without leaving a residue. Be sure to rinse the mop pad well after mopping the floor to remove any excess solution.
Laminate Floors
To clean laminate floors with the Swiffer Wetjet, use the Laminate Floor Cleaner solution. This solution is designed to clean and protect laminate floors without damaging them. Be sure to wring out the mop pad well before mopping the floor to avoid leaving streaks.
Vinyl Floors
To clean vinyl floors with the Swiffer Wetjet, use the Vinyl Floor Cleaner solution. This solution is designed to clean and protect vinyl floors without damaging them. Be sure to wring out the mop pad well before mopping the floor to avoid leaving streaks.
Stone Floors
To clean stone floors with the Swiffer Wetjet, use the Stone Floor Cleaner solution. This solution is designed to clean and protect stone floors without damaging them. Be sure to wring out the mop pad well before mopping the floor to avoid leaving streaks.
| Surface | Solution |
|---|---|
| Hardwood Floors | Hardwood Floor Cleaner solution |
| Tile Floors | Tile Floor Cleaner solution |
| Laminate Floors | Laminate Floor Cleaner solution |
| Vinyl Floors | Vinyl Floor Cleaner solution |
| Stone Floors | Stone Floor Cleaner solution |
Refilling the Cleaning Solution Tank
To keep your Swiffer WetJet performing optimally, it’s crucial to refill the cleaning solution tank regularly. Here’s a step-by-step guide to help you do it effortlessly:
1. Remove the Solution Tank
Grasp the tank’s handle and pull it straight up to detach it from the main unit.
2. Open the Fill Cap
Locate the fill cap on top of the tank and lift it open with your finger or a coin. Avoid spilling any solution while doing this.
3. Fill with Solution
Insert the fill spout of the Swiffer WetJet Cleaning Solution bottle into the tank opening. Squeeze the bottle gently to fill the tank with solution up to the “MAX” fill line. Avoid overfilling.
4. Replace the Fill Cap
Once the tank is filled, secure the fill cap tightly to prevent leaks.
5. Reassemble the Tank
Align the tank with the main unit and push it down until it clicks into place. Ensure it’s securely attached.
6. Cleaning Solution Options
Swiffer offers various cleaning solution options to address specific cleaning needs. Here’s a table summarizing the available solutions:
| Solution | Usage |
|---|---|
| Original | All-purpose cleaning |
| Wood | Cleaning and protecting wood floors |
| Tile & Grout | Cleaning and disinfecting tile and grout surfaces |
| Heavy-Duty | Removing tough stains and dirt |
| Pet | Neutralizing pet odors and cleaning pet messes |
Replacing the Cleaning Pad
To replace the cleaning pad on your Swiffer WetJet, follow these steps:
- Remove the old pad. Press the release button on the front of the WetJet to release the cleaning pad.
- Rinse the pad. Remove the dirty pad and rinse it under warm water until the water runs clear.
- Attach the new pad. Align the new pad with the slots on the WetJet base and press down until it clicks into place.
- Lock the pad. Press the release button again to lock the pad into place.
- Add cleaning solution. Fill the reservoir with cleaning solution to the indicated line.
- Start cleaning. Press the trigger on the handle to spray cleaning solution onto the floor and start cleaning.
- Rinse the pad periodically. If the pad becomes dirty, rinse it under warm water and continue cleaning.
Tips for replacing the cleaning pad:
| Tip | Description |
|---|---|
|
Use genuine Swiffer WetJet cleaning pads. |
Other pads may not fit properly or clean as effectively. |
|
Rinse the pad thoroughly. |
This will remove dirt and debris that could clog the spray nozzles. |
|
Inspect the pad regularly. |
Replace it when it becomes worn or frayed to maintain optimal cleaning performance. |
Storing the Swiffer WetJet
To ensure your Swiffer WetJet remains in optimal condition, proper storage is essential. Follow these steps for storing the WetJet:
1. Unplug the WetJet
Before storing the WetJet, unplug it from the power outlet to prevent accidental activation or damage.
2. Remove the Cleaning Solution Bottle
Detach the cleaning solution bottle by pressing the release button and sliding it out.
3. Empty the Cleaning Solution Tank
Pour any remaining cleaning solution from the tank into the sink or drain. Rinse the tank with clean water and empty it.
4. Remove the Dirt Tank
Detach the dirt tank by lifting the release latch. Empty the tank by pulling out the filter and shaking or rinsing out the contents.
5. Clean the Dirt Tank Filter
If the dirt tank filter is dirty, rinse it with clean water and let it air dry completely before replacing it.
6. Store Upright
Store the WetJet upright in a dry, protected area. Avoid placing heavy objects on top of it or storing it in extreme temperatures.
7. Clean the WetJet Pad
If you used the WetJet pad, remove it and rinse it with clean water. Allow it to air dry before storing it.
8. Detailed Storage Instructions
| Component | Storage Method |
|---|---|
| Cleaning Solution Bottle | Cap it and store it upright in a cool, dry place. |
| Cleaning Solution Tank | Rinse it with clean water and empty it before storing. |
| Dirt Tank | Empty it, clean the filter, and store it upright. |
| Dirt Tank Filter | Rinse it with clean water and air dry it before replacing. |
| WetJet Pad | Rinse it with clean water and air dry it before storing. |
| WetJet | Unplug it, empty the tanks and pad, and store it upright in a dry, protected area. |
Troubleshooting Common Issues
9. Swiffer Wetjet Not Spraying
If your Swiffer WetJet is not spraying, it could be any reasons:
– **Clogged Nozzle:** A clogged nozzle can prevent the fluid from spraying out. To unclog it, remove the nozzle and soak it in hot water for a few minutes. Use a toothpick or a small brush to remove any debris that may be blocking the holes.
– **Empty Fluid Tank:** Ensure that the fluid tank is filled with enough cleaning solution. If it’s empty, refill it according to the manufacturer’s instructions.
– **Faulty Pump:** The pump is responsible for drawing the cleaning solution from the tank and spraying it out. If the pump is faulty, it may not be able to generate enough pressure to spray the fluid. The solution is to replace the pump.
– **Damaged Hose:** The hose that connects the fluid tank to the nozzle can become damaged over time. If the hose is damaged, it may leak or become blocked, preventing the fluid from reaching the nozzle. Check the hose for any damage and replace it if necessary.
– **Electrical Issue:** The Swiffer WetJet requires electricity to operate. If there is an electrical issue, such as a loose connection or a damaged cord, it may not be able to power the pump and spray the fluid. Check the electrical connections and the cord for any damage and repair or replace as needed.
– **Battery Issues**: If your Swiffer WetJet is battery-powered, ensure batteries are inserted correctly and have enough power. Replace batteries if necessary.
– **Solution Level**: The cleaning solution level may be too low to generate sufficient pressure for spraying. Refill the solution tank to the recommended level.
– **Blockage in the Spray Nozzle**: Clogged spray nozzles can inhibit the flow of cleaning solution. Remove and clean the nozzle using a soft brush or a toothpick.
– **Air Pockets in the Solution Tank**: Air pockets in the solution tank can disrupt the flow of cleaning solution. Tilt the Swiffer WetJet forward and gently tap the tank to release any trapped air.
Assembling the Swiffer Wetjet
Follow the instructions provided in the packaging to assemble the Swiffer Wetjet. Ensure the handle, cartridge, and cleaning pad are securely attached.
Filling the Cartridge
Open the cartridge lid and fill it with the desired cleaning solution up to the indicated fill line. Securely close the lid to prevent spillage.
Attaching the Cleaning Pad
Position the cleaning pad onto the base of the Wetjet so that it aligns with the Velcro strips. Press firmly to attach it securely.
Starting the Cleaning Process
Depress the trigger on the handle to release the cleaning solution onto the pad. Begin wiping the floor, moving the Wetjet back and forth in overlapping strokes.
Tips for Effective Cleaning
1. Use the Correct Cleaning Solution
Swiffer Wetjet cleaning solutions are specifically designed for different floor types. Choose the appropriate solution based on your flooring material.
2. Replace Cleaning Pads Regularly
Replace the cleaning pad after each cleaning session or when it becomes visibly dirty. Dirty pads can spread debris and reduce cleaning effectiveness.
3. Clean in Sections
Divide the cleaning area into smaller sections and clean one section at a time. This ensures even coverage and prevents over-wetting.
4. Overlap Strokes
When wiping the floor, overlap your strokes slightly to ensure no areas are missed. Overlapping also helps distribute the cleaning solution more evenly.
5. Avoid Excess Solution
Depress the trigger only as much as necessary to release the cleaning solution. Over-wetting can leave streaks and damage certain flooring materials.
6. Dry the Floor
After cleaning, allow the floor to air dry thoroughly before walking or placing furniture on it. This prevents slips and ensures a streak-free finish.
7. Clean Hard-to-Reach Areas
Use the Swiffer Wetjet’s swivel head to maneuver into tight corners and under furniture. The angled cleaning pad design enables efficient cleaning in these areas.
8. Store Properly
Empty the cartridge after use and store the Swiffer Wetjet upright in a cool, dry place. This prevents solution build-up and ensures optimal performance.
9. Maintain the Swiffer Wetjet
Periodically clean the reservoir, trigger, and swivel head to remove any dirt or debris. This ensures the Swiffer Wetjet continues to operate effectively.
10. Troubleshooting: Excess Solution
| Problem | Solution |
|---|---|
| Cleaning pad is too wet | Use less pressure on the trigger or depress it less often. |
| Floor is streaky | Allow the floor to air dry thoroughly or use a dry cleaning pad to absorb excess solution. |
| Cleaning solution leaks | Ensure the cartridge lid is securely closed and the trigger is not stuck in the depressed position. |
How to Use a Swiffer WetJet
The Swiffer WetJet is a cleaning tool that makes it easy to clean floors. It uses a combination of wet and dry cloths to remove dirt and grime. The wet cloth is used to loosen dirt and grime, while the dry cloth is used to absorb the wet cloth and trap the dirt and grime.
To use a Swiffer WetJet, first attach the wet cloth to the bottom of the cleaning head. Then, fill the reservoir with water and add the cleaning solution. Next, press the button on the handle to spray the cleaning solution onto the floor. Finally, glide the WetJet over the floor to clean it.
People Also Ask
How often should I use a Swiffer WetJet?
You can use a Swiffer WetJet as often as you need to clean your floors. However, it is important to note that the wet cloth can only be used a few times before it needs to be replaced.
What type of cleaning solution can I use in a Swiffer WetJet?
You can use any type of cleaning solution in a Swiffer WetJet. However, it is important to note that some cleaning solutions may damage the wet cloth.
How do I clean the Swiffer WetJet?
To clean the Swiffer WetJet, simply remove the wet cloth and rinse it with water. You can also wipe down the cleaning head with a damp cloth.
