Featured Image:
The Bissell Little Green is a compact and portable carpet cleaner that is ideal for spot cleaning and small areas. It is easy to use and can be used on a variety of surfaces, including carpets, upholstery, and stairs.
If you’re in the market for a carpet cleaner, the Bissell Little Green is a great option. It’s affordable, easy to use, and does a great job of cleaning carpets. Here’s a quick guide on how to use the Bissell Little Green:
1. Fill the clean water tank with hot water and add the desired amount of carpet cleaning solution.
2. Attach the cleaning head to the machine and turn it on.
3. Slowly move the machine back and forth over the area you want to clean.
4. The dirty water will be sucked into the dirty water tank.
5. When you’re finished cleaning, turn off the machine and empty the dirty water tank.
6. Rinse the clean water tank and cleaning head with clean water.
Preparing the Machine for Use
Before using the Bissell Little Green, it’s crucial to prepare it properly to ensure optimal cleaning performance and prevent damage.
1. Gather Necessary Supplies
Ensure you have the following items on hand:
- Formula (Bissell 2X Lift-Off Formula or similar)
- Clean water
- Cleaning pads (optional, for hard surfaces)
- Spray nozzle
- Crevice tool (optional, for tight spaces)
2. Fill the Solution Tank
Remove the solution tank from the machine and fill it with a mixture of Bissell 2X Lift-Off Formula or a similar carpet cleaning solution and clean water, following the manufacturer’s recommended ratio. Avoid overfilling the tank.
| Measurement | Formula | Water |
|---|---|---|
| Small Room Cleaning (100 sq. ft.) | 1/4 cup | 32 oz. |
| Medium Room Cleaning (200 sq. ft.) | 1/2 cup | 64 oz. |
| Large Room Cleaning (300 sq. ft.) | 3/4 cup | 96 oz. |
Note: Use distilled water if your tap water is hard to prevent buildup in the machine.
Cleaning Soft Surfaces
The Bissell Little Green is ideal for cleaning upholstered furniture, mattresses, and other soft surfaces. Here are detailed steps on how to effectively use it:
1. Prepare the Machine
* Fill the clean water tank with warm water.
* Add the recommended amount of Bissell cleaning solution.
* Attach the upholstery attachment to the cleaning head.
2. Test in an Inconspicuous Area
* Before cleaning the entire surface, test the solution on a small, hidden area to ensure it does not cause discoloration or damage.
3. Spray and Extract
* Hold the Bissell Little Green upright and spray the cleaning solution evenly over a small section of the surface.
* Immediately, go over the same area with the extraction tool to remove the dirt and solution.
* Continue alternating between spraying and extracting, gradually working your way across the entire surface.
4. Thoroughly Rinse
* Once you’ve cleaned the entire surface, switch to the rinse-only mode.
* Fill the clean water tank with fresh water and spray it over the cleaned area.
* Extract the water to remove any remaining cleaning solution.
* Repeat the rinsing process several times until the extracted water runs clear.
Additional Tips
* Use a gentle cleaning motion to avoid damaging the fabric.
* Vacuum the area before cleaning to remove loose debris.
* Allow the surface to dry completely before using it again.
* For heavily soiled areas, you may need to repeat the cleaning process.
| Cleaning Solution | Amount |
|---|---|
| Bissell Carpet & Upholstery Cleaning Solution | 1 ounce per gallon of water |
Cleaning Hard Surfaces
The Bissell Little Green can be used to clean various types of hard surfaces, including:
- Sealed hardwood floors
- Laminate flooring
- Ceramic tile
- Vinyl flooring
- Natural stone
When cleaning hard surfaces, select the type of flooring from the options below and follow these general steps:
| Floor Type | Setting |
|---|---|
| Hardwood, Laminate, Tile | Upholstery |
| Natural Stone | Hard Floor |
5. General Cleaning Steps:
- Fill the clean water tank with hot water (do not exceed 140°F) and add the recommended amount of cleaning solution.
- Set the machine to the appropriate setting based on the floor type (as per the table above).
- Press the trigger and move the machine slowly over the surface, allowing solution to spray on and vacuum simultaneously.
- Release the trigger and make additional passes until the surface is clean.
- Empty the dirty water tank after each use and rinse it thoroughly.
Emptying and Rinsing the Machine
Keeping your Bissell Little Green clean and well-maintained is crucial for its longevity and performance. Here’s a step-by-step guide to emptying and rinsing the machine:
- Unplug the machine. Always unplug the machine before emptying or rinsing it to prevent electric shock.
- Empty the dirty water tank. Locate the dirty water tank, usually at the back of the machine. Remove the tank by lifting it up and out. Pour the dirty water down a drain or toilet.
- Rinse the dirty water tank. Fill the dirty water tank with clean water and shake it vigorously to rinse out any remaining residue. Empty the tank again.
- Fill the clean water tank. Locate the clean water tank and remove the cap. Fill the tank with clean, warm water to the indicated fill line.
- Replace the dirty water tank. Insert the empty dirty water tank back into its compartment and make sure it sits securely.
- Rinse the hose and wand. Attach the hose to the machine and the wand to the hose. Turn on the machine and allow clean water to flow through the hose and wand for a few minutes to rinse them out. Turn off the machine and disconnect the hose and wand.
- Rinse the machine’s internal components. Pour 1 cup of cleaning solution into the clean water tank. Attach the hose and wand and turn on the machine. Allow the cleaning solution to flow through the machine for a few minutes to rinse its internal components. Turn off the machine and disconnect the hose and wand.
- Empty the dirty water tank again. Repeat Step 2 to empty the dirty water tank, which will now contain the cleaning solution and any debris rinsed from the machine.
| Cleaning Solution Formula | Amount |
|---|---|
| Bissell Little Green Formula | 1 capful per 12 ounces of water |
| Generic carpet cleaning solution | 1/4 cup per 12 ounces of water |
Maintaining the Bissell Little Green
Maintaining your Bissell Little Green is essential to ensure its optimal performance and longevity. Here are the key steps involved:
Daily Maintenance
After each use, empty the dirty water tank and rinse it thoroughly. Fill the clean water tank with fresh water and add the recommended cleaning solution. Wipe down the machine’s exterior with a damp cloth.
Weekly Maintenance
Once a week, follow these additional steps:
- Remove the nozzles and rinse them under running water.
- Clean the brush roll by removing any debris or hair.
- Rinse the dirty water tank thoroughly with hot water.
- Fill the clean water tank with fresh water and run the machine for a few minutes without any cleaning solution to flush out any remaining dirt.
Monthly Maintenance
Once a month, perform the following:
| Task | Frequency |
|---|---|
| Replace the water filter | Monthly |
| Lubricate the brush roll bearings | Monthly |
| Clean the float valve | Monthly |
| Check the drive belt for wear or damage | Monthly |
Maximizing Cleaning Effectiveness
To ensure optimal cleaning results with your Bissell Little Green, follow these additional tips:
9. Select the Right Cleaning Solution
Use Bissell Little Green Formula or an equivalent cleaning solution specifically designed for pet urine and stains. These formulas contain enzymes that effectively break down organic matter for better stain removal. Avoid using harsh chemicals or bleach, as they can damage the machine or the surface being cleaned.
| Solution Type | Recommended Use |
|---|---|
| Bissell Little Green Formula | General cleaning, pet urine and stains |
| Enzyme-based cleaner | Tough stains, organic matter |
| Upholstery cleaner | Fabric-covered surfaces |
Test the cleaning solution on an inconspicuous area before using it on the entire surface to ensure it does not discolor or damage the material.
Safety Considerations
Using the Bissell Little Green safely is essential to prevent injuries or damage to the machine. Here are some important safety considerations to keep in mind:
1. Read the Owner’s Manual Carefully
Before using the Little Green, go through the owner’s manual thoroughly to familiarize yourself with all precautions and instructions.
2. Wear Appropriate Clothing
Avoid wearing loose clothing or dangling jewelry that could get caught in the machine.
3. Use Only Recommended Cleaning Solutions
Refer to the owner’s manual for the compatible cleaning solutions. Using unauthorized detergents can damage the Little Green.
4. Disconnect from Power Source
Always unplug the machine from the power outlet before performing maintenance or cleaning.
5. Keep Children and Pets Away
The Little Green is not suitable for use around children or pets. Keep them at a safe distance during operation.
6. Avoid Overfilling Tanks
Pay attention to the tank fill lines and do not overfill the clean water or dirty water tanks.
7. Inspect the Power Cord
Regularly check the power cord for damage or loose connections. A frayed or damaged cord can be a safety hazard.
8. Store Properly
Keep the Little Green in a cool, dry place when not in use. Protect it from excessive heat or moisture.
9. Service Regularly
Regular maintenance is crucial for the optimal performance and longevity of the Little Green. Refer to the owner’s manual for recommended maintenance schedules.
10. Additional Safety Tips
| – Never operate the Little Green without water in the clean water tank. |
| – Do not use boiling water or corrosive chemicals in the machine. |
| – If the machine becomes clogged, turn it off and disconnect it from the power source. |
| – Avoid using the Little Green on delicate fabrics or surfaces. |
| – Be aware of the machine’s weight and lift with proper technique. |
How to Use the Bissell Little Green
The Bissell Little Green is a portable carpet cleaner that is perfect for small messes and quick cleanups. It is easy to use and can be used on a variety of carpets and rugs. Here are the steps on how to use the Bissell Little Green:
- Fill the clean water tank. The clean water tank is located on the front of the machine. Fill it with warm water up to the fill line.
- Add cleaning solution. Add the recommended amount of Bissell cleaning solution to the clean water tank. The amount of cleaning solution you need will vary depending on the size of the mess you are cleaning.
- Attach the cleaning head. The cleaning head is located on the bottom of the machine. Attach it to the front of the machine by aligning the tabs on the head with the slots on the machine.
- Turn on the machine. Press the power button to turn on the machine. The machine will start to spray cleaning solution and water onto the carpet.
- Clean the carpet. Slowly move the machine back and forth over the area you are cleaning. The machine will suck up the dirty water and leave the carpet clean.
- Empty the dirty water tank. Once you have finished cleaning, turn off the machine and empty the dirty water tank. The dirty water tank is located on the back of the machine.
- Rinse the machine. Fill the clean water tank with clean water and run the machine for a few seconds to rinse it out. This will help to prevent the machine from getting clogged.
People Also Ask
What is the best way to use the Bissell Little Green?
The best way to use the Bissell Little Green is to follow the steps outlined in the user manual. This will help you to get the best results and avoid damaging your carpet.
How often should I use the Bissell Little Green?
The frequency with which you need to use the Bissell Little Green will depend on the amount of traffic your carpet gets. If you have a lot of pets or children, you may need to use it more often. However, most people only need to use it once or twice a month.
What type of cleaning solution should I use with the Bissell Little Green?
You can use any type of carpet cleaning solution with the Bissell Little Green. However, Bissell recommends using its own brand of cleaning solution. This will help to ensure that your carpet is cleaned properly and that the machine does not get clogged.
