#1: Crafting a Workbench in Return to Moria

Crafting a Workbench in Return to Moria

Embark on an epic adventure in the depths of Moria, where survival and resourcefulness are paramount. As you navigate the treacherous tunnels and encounter formidable foes, the ability to craft essential items becomes crucial. Among these, the humble workbench stands as the cornerstone of your crafting endeavors, allowing you to transform raw materials into indispensable tools and equipment. In this comprehensive guide, we will delve into the intricacies of crafting a workbench in Return to Moria, empowering you to establish a secure and well-equipped base in the unforgiving subterranean realm.

Gathering the Required Materials

To embark on the construction of a workbench, you must first gather the necessary materials. This includes a significant quantity of wood, which can be obtained by chopping down trees in the surrounding forest. Additionally, you will require metal, which can be found by mining ore veins or looting fallen enemies. The specific amounts of wood and metal required vary depending on the type of workbench you wish to craft. Once you have gathered the requisite materials, you are ready to proceed with the crafting process. However, to successfully complete this task, you must first possess the necessary crafting knowledge and skills.

Unlocking the Craft Recipe

Before you can craft a workbench, you must unlock the appropriate craft recipe. This can be achieved by progressing through the game’s storyline and reaching certain milestones. As you complete quests and explore new areas, you will gain access to new crafting recipes, including the recipe for the workbench. Once you have unlocked the recipe, you can proceed to any crafting station in the game and begin the crafting process. Remember that different crafting stations may have different capabilities and may not all be suitable for crafting a workbench. Therefore, it is important to choose the appropriate crafting station based on the materials you have gathered and the recipe you wish to use.

Gathering Necessary Materials

Crafting a Workbench in Return To Moria requires gathering essential materials. These materials are obtainable through various means, including mining, woodcutting, and scavenging.

Mining for Ores

Mithril Ore: This rare ore is primarily found in the depths of Moria. Explore caves and abandoned mines to locate veins of Mithril Ore and extract them using a pickaxe.

Iron Ore: Iron Ore is a common mineral that can be found in abundance near the surface. Gather it from boulders and outcrops using a pickaxe.

Logging for Wood

Oak Wood: Oak trees are numerous in the forests surrounding Moria. Use an axe to chop down Oak trees and gather their logs.

Birch Wood: Birch trees are less common but can be found in some areas of Moria. Obtain Birch Wood by felling these trees with an axe.

Scavenging for Additional Items

Leather: Leather can be obtained by hunting animals or disassembling leather items. Use a knife to skin animals and salvage Leather.

Worktable: A Worktable is a prerequisite for crafting a Workbench. Construct a Worktable using the materials listed below.

Material	Quantity
Oak Wood	20
Birch Wood	10
Iron Ore	10

Preparing the Foundation

### Materials Gathering

The first step is to gather the necessary materials. Crafting a workbench requires:

– 10 Oak Logs
– 5 Flint Stones
– 1 Wool

Oak logs can be obtained by chopping down oak trees, while flint stones can be found in abundance on the ground. Wool can be collected from sheep by shearing them.

### Crafting Table Creation

Once you have the materials, you need to create a crafting table. A crafting table is a 3×3 grid that allows you to combine different materials to create new items. To create a crafting table, simply open the crafting menu (press “E” by default) and place 4 oak logs in a 2×2 grid:

“`
O O
O O
“`

### Workbench Creation

With the crafting table in place, you can now craft the workbench itself. Open the crafting menu and place the following items in the grid:

“`

1	2	3
Oak Log	Oak Log	Oak Log
Oak Log	Crafting Table	Oak Log
Flint Stone	Wool	Flint Stone

“`

Installing the Workbench Top

Once you have your workbench base assembled, it’s time to install the top. This is a fairly straightforward process, but there are a few things you need to keep in mind. First, make sure that the top is the correct size for your base. You don’t want it to be too big or too small, as this will affect the stability of your workbench.

Second, make sure that the top is level. This is important for ensuring that your workbench is stable and that your projects are accurate. You can use a level to check if the top is level, and if it’s not, you can use shims to level it out.

Finally, attach the top to the base using bolts or screws. Make sure that the bolts or screws are long enough to go through the top and into the base, and that they are tightened securely. Once the top is attached, your workbench is complete!

Step-by-Step Instructions for Installing the Workbench Top

1. Place the workbench top on the base. Make sure that the top is aligned with the base and that it is level.
2. Drill pilot holes through the top and into the base. This will help to prevent the wood from splitting when you drive in the bolts or screws.
3. Insert bolts or screws through the pilot holes and into the base. Tighten the bolts or screws securely.
4. Check to make sure that the top is level. If it’s not, use shims to level it out.
5. Wipe down the workbench top with a clean cloth to remove any sawdust or debris. Your workbench is now complete and ready to use!

Securing the Workbench to the Wall

Securing your workbench to the wall is crucial for stability and safety. Follow these detailed steps to ensure your workbench is securely mounted:

1. Gather Materials

4 heavy-duty wall anchors
Lag bolts (3/8-inch diameter) that are 3-4 inches long
Drill with a 3/8-inch bit
Socket wrench or Allen wrench

2. Mark Mounting Locations

Position the workbench against the wall and mark the locations where the four wall anchors will be installed.

3. Drill Pilot Holes

Use a 3/8-inch drill bit to drill pilot holes at the marked locations. These holes should be deep enough to accommodate the wall anchors.

4. Install Wall Anchors

Insert the wall anchors into the pilot holes and hammer them flush with the wall surface.

5. Align Workbench

Reposition the workbench and align it with the installed wall anchors.

6. Insert Lag Bolts

Insert the lag bolts through the workbench legs and into the wall anchors. Tighten the bolts using a socket wrench or Allen wrench until the workbench is securely attached to the wall.

7. Check for Stability

Once the lag bolts are tightened, check the stability of the workbench by applying pressure to the top and sides. If the workbench is properly secured, it should not wobble or move.

Drill Bit Size	Anchor Size
3/8 inch	3/8 inch

Staining or Finishing the Workbench

Once your workbench is assembled and sanded, it’s time to consider staining or finishing it. Staining can add color and character to the wood, while a finish will protect it from spills, heat, and wear and tear.

Oil-Based Stains

Oil-based stains are a traditional choice for workbenches. They penetrate the wood deeply, providing a rich and durable finish. However, they can be more difficult to apply and take longer to dry.

Water-Based Stains

Water-based stains are easier to apply and clean up than oil-based stains. They also dry faster. However, they may not be as durable as oil-based stains.

Urethane Finish

Urethane is a clear finish that is often used on workbenches. It is durable, resistant to water and heat, and easy to apply. However, it can yellow over time.

Polyurethane Finish

Polyurethane is a similar finish to urethane but is more durable and resistant to scratches and wear.

Satin Finish

A satin finish has a slight sheen that is both attractive and practical for a workbench. It is less prone to showing scratches and wear than a glossy finish.

Gloss Finish

A gloss finish is more reflective than a satin finish and can make a workbench look more elegant. However, it is more prone to showing scratches and wear.

Table of Finish Options

Finish Type	Pros	Cons
Oil-Based Stain	Rich, durable finish	Difficult to apply, slow drying
Water-Based Stain	Easy to apply, clean up, and dry	Less durable
Urethane Finish	Durable, water-resistant, easy to apply	May yellow over time
Polyurethane Finish	More durable than urethane, scratch-resistant	More expensive
Satin Finish	Attractive, practical for workbench	Less reflective than gloss
Gloss Finish	Elegant, more reflective	More prone to scratches and wear

Crafting a Workbench in Return To Moria

Setting Up the Workbench:

To begin crafting a workbench, you’ll need 10 pieces of Wood and 5 pieces of Iron Ore. Once you have the necessary resources, follow these steps:

1. Open the crafting menu (default key: E)

2. Select the “Structures” tab

3. Locate the “Workbench” and click on it

4. Place the workbench in your desired location and click on it to access its interface

Customizing the Workbench for Specific Needs:

The workbench can be customized to meet your specific crafting needs. Here’s how:

1. Adding Modules:

Modules can be attached to the workbench to expand its functionality. There are various types of modules available, such as the Smelter, Forge, and Enchanter.

2. Upgrading Modules:

Modules can be upgraded to improve their efficiency and effectiveness. Upgrading requires specific resources and can be done using the “Upgrade” button on the module interface.

3. Adjusting Module Positions:

Modules can be rearranged on the workbench to optimize their placement for better accessibility and workflow.

4. Configuring Module Input/Output Slots:

Modules have input and output slots that can be configured to automate resource transfer and crafting processes.

5. Adding Additional Workbenches:

Multiple workbenches can be placed in a single location to increase crafting capacity and efficiency.

6. Connecting Workbenches:

Workbenches can be connected to each other using conveyor belts to automate resource transportation and streamline production.

7. Setting Crafting Queues:

The workbench can be programmed with crafting queues to automate production of specific items in bulk.

8. Configuring Crafting Time and Resources:

The crafting time and required resources can be adjusted for specific modules to optimize production efficiency.

9. Assigning Crafting Permissions:

Crafting permissions can be assigned to specific players or groups to manage access to and utilization of the workbench.

10. Designing Module Combinations:

Experiment with different module combinations and configurations to create customized crafting setups that cater to your specific needs and streamline your production processes.

How to Craft a Workbench in Return to Moria

Crafting a workbench in Return to Moria is essential for creating and repairing items. Here’s a step-by-step guide on how to do it:

Gather the necessary materials: 10x Coarse Plank, 5x Mithril Ingot
Open the crafting menu by pressing “E”
Select the “Workshop” tab
Find the “Workbench” item and click “Craft”
The workbench will now be placed in your inventory

To use the workbench, simply equip it from your inventory and place it on the ground. You can then interact with it to access the crafting interface.